Buku Panduan Pangguna Lampu Sorot Dinding Sensor Gerak GLOBE Electric 32982

Bubuka

The GLOBE Electric 32982 1-Light Motion Sensor Wall Sconce is a weather-resistant outdoor lighting fixture designed to enhance security and ambiance. Featuring a matte black finish and clear seeded glass shade, this sconce offers 150-degree motion detection up to 30 feet away, providing brighter illumination when activated. It allows for customizable low-level light brightness settings (off, 30%, 50%, or 70%) to suit various needs and occasions. This manual provides essential information for safe installation, operation, and maintenance of your wall sconce.

Émbaran Kasalametan

PERHATOSAN: To avoid electric shock, ensure power is turned off at the circuit breaker before installation or servicing. All wiring connections must be in accordance with local and national electrical codes. If you are unsure about proper installation, consult a qualified electrician.

• Ulah sambungkeun fixture ieu ka sistem listrik ungrounded.
• Ulah ngaleuwihan wat maksimumtage dieusian pikeun bohlam.
• Nanganan komponén kaca kalayan ati-ati pikeun nyegah pegatna.
• Tetep bahan bungkusan jauh ti barudak.

Eusi pakét

Pariksa yén sadaya komponén aya sateuacan ngamimitian pamasangan:

• 1x Wall Sconce
• 1x Glass Shade (Clear Seeded)
• Pamasangan Hardware
• Lembar instruksi (manual ieu)
• Note: E26/Medium Base 60W Bulb is sold separately and not included.

Figure 1: GLOBE Electric 32982 Motion Sensor Wall Sconce (Matte Black with Clear Seeded Glass Shade)

spésifikasi

angka 2: Dimensi produk pikeun Planning Instalasi

Setup sareng Instalasi

This wall sconce is designed for hardwired installation. Professional installation is recommended if you are not familiar with electrical wiring.

Sateuacan Anjeun Ngawitan:

• Pareuman kakuatan at the main circuit breaker or fuse box.
• Pastikeun permukaan pamasangan bersih, garing, sareng kuat sacara struktural.
• Bongkar sadaya komponén sareng parios naha aya karusakan.

Léngkah-léngkah pamasangan:

1. Ngagantelkeun Hardware Pemasangan: Secure the mounting bracket to the junction box using the provided screws. Ensure the bracket is level and firmly attached.
2. Jieun sambungan listrik:
   • Sambungkeun kabel ground fixture (biasana tambaga polos atanapi héjo) kana kabel ground imah.
   • Sambungkeun kabel panas fixture (biasana hideung) kana kabel panas imah (hideung).
   • Sambungkeun kabel nétral perlengkapan (biasana bodas) kana kabel nétral imah (bodas).
   • Amankeun sadaya sambungan nganggo mur kawat teras bungkus ku pita listrik pikeun kaamanan tambahan.
3. Pasang Perlengkapan: Carefully align the fixture with the mounting bracket and secure it using the provided screws or nuts. Ensure the fixture is flush against the wall.
4. Pasang Bulb: Screw in one E26/Medium Base 60W maximum bulb (sold separately). Compatible with LED and Incandescent bulbs.
5. Pasang Kaca Shade: Carefully place the clear seeded glass shade onto the fixture and secure it according to the design (e.g., with retaining ring or screws).
6. Mulangkeun Daya: Sakali pamasangan parantos réngsé, hurungkeun deui kakuatan dina pemutus sirkuit.

Gambar 3: Kelample of Installed Wall Sconce

Parentah Operasi

Your GLOBE Electric Motion Sensor Wall Sconce is designed for automatic operation based on motion detection and ambient light levels.

Fungsi Sénsor Gerak:

• The integrated motion sensor detects movement within a 150-degree field and up to 30 feet away.
• When motion is detected, the light will illuminate at full brightness.
• The light will remain on as long as motion is detected within its range. After motion ceases, the light will turn off after a preset delay (typically a few minutes, consult specific product settings if adjustable).

Figure 4: Motion Activated Feature

Low-Level Light Brightness Adjustment:

This fixture allows you to adjust the low-level illumination when no motion is detected. This setting is typically controlled via a switch or dial on the fixture itself, or potentially through a compatible smart bulb if installed (sold separately).

• Pareum: The light remains off when no motion is detected.
• 30%: The light stays on at 30% brightness when no motion is detected.
• 50%: The light stays on at 50% brightness when no motion is detected.
• 70%: The light stays on at 70% brightness when no motion is detected.

Refer to the physical fixture for the exact location of the brightness adjustment control.

Pangropéa

Regular maintenance will ensure the longevity and optimal performance of your wall sconce.

beberesih:

• Pareuman heula daya dina pemutus sirkuit sateuacan diberesihan.
• Ngusap bubuhan ku lemes, damp lawon.
• Do not use abrasive cleaners or solvents, as these may damage the finish or glass.
• Clean the motion sensor lens periodically to ensure proper detection.

Ngagantian bohlam:

• Pastikeun kakuatan pareum dina circuit breaker.
• Keun bohlamna tiis sagemblengna sateuacan dirampa.
• Carefully remove the glass shade to access the bulb.
• Unscrew the old bulb and replace it with a new E26/Medium Base bulb, not exceeding 60W.
• Reattach the glass shade securely.
• Mulangkeun kakuatan.

Pamérésan masalah

If you experience issues with your wall sconce, refer to the following common problems and solutions:

Garansi sareng Rojongan

produk ieu dijual kalawan Taya Garansi as per manufacturer specifications. For technical support or inquiries, please visit the official GLOBE Electric websitus atanapi ngahubungan departemén layanan palanggan maranéhna.

GLOBE Electric Official Websitus: www.globe-electric.com