Walimex Pro Campaigner 600 HS Studio Flash Instruction Manual

1. Bubuka

Thank you for choosing the Walimex Pro Campaigner 600 HS Studio Flash. This high-performance studio flash is designed for semi-professional photographers requiring advanced features and reliable operation. This manual provides essential information for safe and effective use, including setup, operation, maintenance, and troubleshooting.

2. Parentah Kasalametan

• Baca sadaya parentah sateuacan dianggo.
• Ulah ngalaan unit ka hujan atawa Uap.
• Pastikeun catu dayana cocog sareng sarat unitna.
• Ulah nyobian ngabongkar atanapi ngalereskeun unit nyalira. Hubungi petugas servis anu mumpuni.
• Jauhkeun tina jangkauan barudak.
• Hindarkeun panon tina paparan langsung kana lampu senter.
• Pastikeun ventilasi ditangtoskeun pikeun nyegah overheating.

3. Eusi Paket

Pastikeun yén sadaya item anu didaptarkeun di handap kalebet kana pakét anjeun:

• 1x Walimex Pro Campaigner 600 HS Studio Flash
• 1x Standard Reflector
• 1 x Kabel Daya
• 1x Sync Cable
• 1 x Cap Pelindung
• 1 x Manual Instruksi

Figure 3.1: Included components in the Walimex Pro Campaigner 600 HS Studio Flash package. This image shows the flash unit, a standard reflector, a softbox, a light stand, and a wireless trigger.

4. Produk Langkungview

The Walimex Pro Campaigner 600 HS is a powerful studio flash unit featuring a robust aluminum finish and advanced functionalities.

Gambar 4.1: Hareupeun view of the Walimex Pro Campaigner 600 HS Studio Flash with reflector attached.

Gambar 4.2: Tukangeun view showing the control panel, power input, and fan vents of the Walimex Pro Campaigner 600 HS Studio Flash.

Fitur konci:

• High-Speed Sync (HS) Mode: Allows freezing fast motion and shooting with wide apertures in bright conditions.
• Integrated 2.4 GHz Receiver: Supports 16 channels and 5 groups for wireless control with an optional radio trigger.
• 600Ws Flash Output: Continuously adjustable from 1/1 to 1/32.
• Waktu Daur Ulang Gancang: Kurang ti 0.3 detik.
• 25W LED Modeling Light: Provides continuous illumination for previewngungkulan éfék cahaya.
• Gunung Bowens: Cocog sareng rupa-rupa pangubah cahaya.
• Quiet Fan Cooling: Ensures stable operation and extends unit lifespan.

5. Setélan

5.1 Attaching the Reflector/Light Modifier

1. Align the Bowens mount of the reflector or light modifier with the flash unit's mount.
2. Insert the modifier and rotate it clockwise until it locks securely into place.
3. To remove, press the release button on the flash unit and rotate the modifier counter-clockwise.

5.2 Mounting on a Light Stand

1. Loosen the locking knob on the flash unit's mounting bracket.
2. Place the flash unit onto the light stand spigot.
3. Tighten the locking knob to secure the flash unit.
4. Adjust the tilt angle of the flash unit as needed and tighten the tilt locking knob.

5.3 Sambungan Daya

1. Ensure the flash unit is switched OFF.
2. Connect the power cable to the power input on the rear of the flash unit.
3. Colokkeun tungtung kabel daya anu sanés ka stopkontak anu cocog.

6. Parentah Operasi

6.1 Daya Hurung/Pareuman

Pencét éta POWER switch on the rear panel to turn the unit ON or OFF. The display will illuminate upon power-on.

6.2 Nyaluyukeun Kaluaran Lampu Kilat

Puterkeun POWER ADJUSTMENT DIAL to set the desired flash output. The output can be adjusted continuously from 1/1 (full power) to 1/32. The current setting is displayed on the LCD screen.

6.3 High-Speed Sync (HS) Mode

The HS mode allows for shutter speeds faster than your camera's native flash sync speed, enabling you to freeze fast-moving subjects or use wider apertures in bright ambient light. To activate HS mode, press the HS button on the control panel. Ensure your camera and wireless trigger (if used) also support High-Speed Sync.

Figure 6.1: Visual demonstration of the High-Speed Sync (HS) mode's ability to freeze motion compared to standard flash synchronization.

6.4 Wireless Control (2.4 GHz Receiver)

The integrated 2.4 GHz receiver allows for wireless control of the flash unit using a compatible Walimex Pro radio trigger (sold separately).

1. Ensure the flash unit's wireless function is enabled (refer to the display for the wireless icon).
2. Set the desired channel and group on both the flash unit and the radio trigger. The flash supports 16 channels and 5 groups.
3. Test the connection by pressing the test button on the trigger.

6.5 Lampu Pemodelan

The 25W LED modeling light can be turned ON or OFF using the MODEL button on the control panel. This light helps in previewing the lighting effect before firing the flash.

7. Pangropéa

• beberesih: Use a soft, dry cloth to clean the exterior of the flash unit. Do not use liquid cleaners or solvents.
• Panyimpenan: Simpen unit dina tempat anu tiis sareng garing jauh tina sinar panonpoé langsung sareng suhu anu ekstrim.
• Ngagantian bohlam: The flash tube na modeling lamp are user-replaceable components. Consult a qualified technician or the manufacturer's support for replacement procedures if needed.
• Ventilasi: Ensure the cooling fan vents are clear of obstructions to maintain proper airflow.

8. Cara ngungkulan

9. Spésifikasi

Figure 9.1: Physical dimensions of the Walimex Pro Campaigner 600 HS Studio Flash.

10. Garansi jeung Rojongan

This product comes with a standard manufacturer's warranty. For detailed warranty information, technical support, or service inquiries, please contact Walser GmbH directly or refer to their official websitus. Simpen bukti pameseran anjeun pikeun klaim garansi.

Manufacturer: Walser GmbH