Bubuka
Hatur nuhun pikeun meuliasing the XOSS XR01 Bicycle Tail Light. This manual provides detailed instructions for the proper setup, operation, and maintenance of your device. Please read this manual thoroughly before use to ensure optimal performance and safety.
Image: XOSS XR01 Smart Tail Light with its main features.
Eusi pakét
Mangga parios pakét pikeun mastikeun yén sadaya barang aya:
- XOSS XR01 Tail Light x 1
- Saddle Bracket x 1
- Seatpost Bracket x 1
- Kabel Ngecas Tipe-C x 1
- Karét Gelang x 1
- Fastening Bands x 4
- Buku Panduan x 1
Gambar: Detil view of the XOSS XR01 package contents.
Setup sareng Instalasi
The XOSS XR01 supports two easy installation methods without requiring any tools.
1. Seatpost Mount
- Attach the seatpost bracket to your bicycle's seatpost.
- Secure the bracket using the provided rubber band.
- Slide the XOSS XR01 tail light onto the mounted bracket until it clicks into place.
2. Saddle Mount
- Attach the saddle bracket to the rails under your bicycle saddle.
- Secure the bracket using the provided fastening bands.
- Slide the XOSS XR01 tail light onto the mounted bracket until it clicks into place.
Image: XOSS XR01 tail light installed on a seatpost.
Image: Installation diagrams for seatpost and saddle mounts.
Parentah Operasi
Daya Hurung/Pareuman
- Pikeun Ngahurungkeun: Pencét jeung tahan tombol daya salila 2 detik.
- Pikeun mareuman: Pencét jeung tahan tombol daya salila 2 detik.
Ngalihkeun Mode
- While the light is on, short press the power button to cycle through different lighting modes.
- The device features mode memory, automatically recalling the last used mode when powered on.
Otomatis Hurung / Pareum Fungsi
The XR01 is equipped with an intelligent vibration sensor:
- The light automatically turns on when vibration (movement) is detected.
- If no movement is detected for 30 seconds, the light will automatically turn off to conserve battery.
Image: Automatic On/Off feature in action.
Smart Brake Sensor
The built-in brake sensor enhances safety by detecting deceleration:
- When braking is detected, the tail light automatically illuminates at its maximum brightness.
- This alerts vehicles and pedestrians behind you, significantly improving your visibility and safety.
Image: The XOSS XR01 tail light with its smart brake sensor activated.
Video: Demonstration of the XOSS XR01 bicycle tail light's features, including automatic on/off and brake sensing.
Ngecas
The XOSS XR01 uses a convenient Type-C charging interface.
- Connect the provided Type-C charging cable to the tail light and a USB power source (e.g., computer, wall adapter).
- Ngeusi batre pinuh butuh kurang leuwih 1 jam.
- The light will indicate charging status (e.g., solid light while charging, off when fully charged).
Image: Charging the XOSS XR01 tail light with a Type-C cable.
spésifikasi
| Fitur | Katerangan |
|---|---|
| Modél | XR01 |
| Peunteun waterproof | IPX6 |
| Pangecas Interface | Tipe-C |
| Waktu Ngecas | Kira-kira. 1 jam |
| Kahirupan batré | 7-16 jam (gumantung kana mode) |
| Waktu sayaga | Nepi ka 3 bulan |
| Sénsor | Vibration sensor, Brake sensor |
| Tipe Lénsa | Innovative Optical Lens (Anti-glare, High Visibility) |
| Bahan | Imitation Carbon Fiber Texture surface |
Pangropéa
- beberesih: Wipe the tail light with a soft, damp lawon. Ulah make cleaners abrasive atawa pangleyur.
- Tahan cai: The device is IPX6 waterproof, meaning it is protected against powerful water jets. It can withstand heavy rain but should not be submerged in water.
- Panyimpenan: Store the tail light in a cool, dry place when not in use for extended periods. Charge the device periodically (e.g., every 3 months) to maintain battery health.
- Perawatan batré: Hindarkeun sering-sering ngosongkeun batré pikeun manjangkeun umurna.
Image: XOSS XR01 tail light demonstrating its IPX6 waterproof capability.
Pamérésan masalah
- Lampu teu hurung: Ensure the battery is charged. Press and hold the power button for 2 seconds to turn it on.
- Automatic on/off not working: Check if the device is securely mounted and if there is sufficient vibration to trigger the sensor. Ensure the auto-on feature is enabled (if applicable, refer to mode switching).
- Brake sensor not responding: Ensure the light is firmly attached and positioned correctly. The sensor relies on deceleration to activate.
- hirup batré pondok: Ensure the device is fully charged. Battery life can vary based on the selected lighting mode. Extreme temperatures can also affect battery performance.
- Masalah ngecas: Try a different Type-C cable or USB power source. Ensure the charging port is clean and free of debris.
Garansi sareng Rojongan
For warranty information and customer support, please refer to the official XOSS websitus atanapi ngahubungan pangecér Anjeun. Simpen resi pameseran anjeun salaku bukti pameseran.