Parentah Kasalametan penting
Read and understand all safety instructions before operating this appliance. Failure to follow these instructions may result in electric shock, fire, or serious injury.
- Salawasna pegatkeun sambungan catu daya saméméh ngalakukeun sagala pangropéa atawa beberesih.
- Entong jalankeun pompa upami kabel listrik atanapi colokan rusak.
- Ensure the pump is fully submerged in water during operation to prevent overheating.
- This pump is designed for indoor use in freshwater or saltwater aquariums only.
- Entong nganggo alat ieu pikeun tujuan salian ti tujuanna.
- Keep the controller dry and away from water.
- Pastikeun sadaya sambungan aman sateuacan diaktipkeun.
Eusi pakét
Pastikeun yén sadaya komponén aya dina bungkusan:
Image: All components of the Jebao Jecod EP-1000M Smart DC Pump, including the pump unit, LCD display controller, power adapter, and various fittings.
- EP-1000M DC Pump Unit
- LCD Display Controller
- Adaptor Daya (DC 24V)
- Output Nozzles/Fittings
- Manual pangguna (dokumén ieu)
Produk Leuwihview jeung Fitur
The Jebao Jecod EP Smart DC Pump series offers advanced control and efficient water movement for aquarium systems. Key features include:
- Kontrol pinter: 2.4G Wi-Fi connectivity for control via the Jebao App (iOS and Android).
- Mode AP: Direct connection to the controller without a router.
- LCD Display Controller: Manual control and monitoring of pump parameters.
- Pamakéan serbaguna: Suitable for both marine and freshwater environments due to no exposed copper elements.
- Operasi sepi: Utilizes SINE wave technology for ultra-quiet performance.
- Fitur kaamanan: IC electronic detection for automatic power-off protection upon no water, and motor protection if the rotor is blocked.
Parentah Setup
- Penempatan pompa: Position the pump in the desired location within your sump or aquarium. Ensure it is fully submerged and stable.
- Kaluaran Sambungkeun: Attach the appropriate output nozzle or plumbing to the pump's outlet. Ensure a secure, leak-free connection.
- Sambungkeun Controller: Plug the pump unit cable into the LCD display controller. Ensure the connection is firm.
- Sambungkeun Adaptor Daya: Plug the power adapter into the controller, then plug the power adapter into a suitable electrical outlet.
- Daya mimiti Hurung: The LCD controller should illuminate. The pump will perform a brief self-test.
- Unduh Aplikasi (Opsional): Download the "Jebao" app from your smartphone's app store (iOS or Android).
- Sambungan Wi-Fi:
- Open the Jebao app and follow the on-screen instructions to add a new device.
- Select the EP series pump.
- Choose your 2.4G Wi-Fi network and enter the password.
- If direct connection is preferred, the controller also supports AP mode (no router required). Refer to the app's specific instructions for AP mode setup.
Image: The EP-1000M pump unit with the blue output nozzle and white fitting securely attached, ready for plumbing connection.
Parentah Operasi
Manual Control (LCD Display Controller)
The LCD controller allows direct adjustment of pump settings:
- Tombol Daya: Turns the pump on or off.
- Penyesuaian Aliran: Use the up/down arrows to increase or decrease the flow rate. The display will show the current power level or flow percentage.
- Tombol Mode: Cycle through available operating modes (e.g., constant flow, wave mode, feed mode). Refer to the controller's specific icons for mode identification.
- Modeu eupan: Pressing the feed button typically pauses the pump for a set duration (e.g., 10 minutes) to allow for feeding without food being immediately drawn into filtration.
App Control (Jebao App)
Once connected to the Jebao app via Wi-Fi, you can access advanced control features:
- Jauh On/Pareum: Control the pump remotely.
- Precise Flow Adjustment: Fine-tune the flow rate with greater precision than manual control.
- Modeu Disesuaikeun: Set schedules, create custom wave patterns, and configure feed modes.
- Ngawaskeun: View real-time pump status and performance data.
Note: Specific app features and interface may vary with updates. Refer to the in-app help or Jebao's official websitus kanggo inpormasi panganyarna.
Pangropéa
Pangropéa rutin ngajamin kinerja optimal sareng umur panjang pompa anjeun.
- Pegatkeun Daya: Salawasna cabut pompa tina sumber listrik sateuacan aya pangropéa.
- Ngabongkar pompa: Carefully remove the pump from the water and disassemble the intake screen and impeller housing.
- Clean Impeller and Housing:
- Remove the impeller. Inspect it for any debris, calcium buildup, or damage.
- Clean the impeller and its shaft, as well as the inside of the impeller housing, using a soft brush and warm water. For stubborn calcium deposits, a mild vinegar solution can be used, followed by thorough rinsing.
- Ensure no foreign objects are lodged in the impeller or housing.
- Mariksa komponén: Check the power cord for any signs of wear or damage. Inspect all O-rings and seals for cracks or deterioration. Replace if necessary.
- Pasang deui: Carefully reassemble the pump, ensuring all parts are correctly seated and connections are secure.
- Frékuénsi: Perform cleaning every 1-3 months, depending on water conditions and debris accumulation.
Important: The pump features IC electronic detection for motor protection if the rotor is blocked. Regular cleaning helps prevent such blockages.
Pamérésan masalah
| Masalah | Mungkin Cukang lantaranana | Solusi |
|---|---|---|
| Pompa teu hurung. | No power, loose connection, damaged power adapter/controller. | Check power outlet. Ensure all cables are securely connected. Inspect power adapter and controller for damage. |
| Pump runs but no water flow or reduced flow. | Air lock, clogged impeller, blocked intake/output, pump not fully submerged. | Ensure pump is fully submerged. Disconnect power, remove pump, clean impeller and housing. Check for obstructions in plumbing. |
| Pump is noisy or vibrating. | Impeller obstruction, worn impeller, air in pump, improper seating. | Disconnect power, clean impeller. Ensure pump is securely placed and not vibrating against tank walls. Check for air bubbles in the pump. |
| Controller LCD is blank or unresponsive. | Power issue, controller malfunction. | Check power connection to the controller. Disconnect and reconnect power. If issue persists, contact support. |
| Teu tiasa nyambung ka Wi-Fi/App. | Incorrect Wi-Fi password, 5Ghz network, router issues, app glitch. | Ensure you are connecting to a 2.4Ghz Wi-Fi network. Double-check password. Try restarting your router and the pump. Reinstall the app. Try AP mode if available. |
| Pump automatically shuts off. | No water detection, motor blocked protection. | Check water level in the sump/aquarium. Disconnect power, inspect impeller for blockages, and clean if necessary. |
Specifications (Model: EP-1000M)
| Fitur | Rincian |
|---|---|
| merek | Jebao |
| Modél | EP-1000M |
| Sumber Daya | DC 24V |
| Masukan Voltage | 110-120V 60Hz (via adapter) |
| Konsumsi Daya | 12W |
| Laju aliran maksimum | 317 GPH (Gallons Per Hour) / 1200 L/H |
| Jangkungna Kepala maksimum | 4.9 suku / 1.5 Méter |
| Ukuran produk (L x W x H) | 3.75" x 2" x 3.75" |
| Bahan | Stainless Steel / Metal (internal components) |
| Kasaluyuan | Saltwater and Freshwater |
| Kontrol | 2.4G Wi-Fi (Jebao App) + LCD Display Controller |
Garansi sareng Rojongan
For warranty information, please refer to the documentation provided at the time of purchase or contact your retailer. Jebao products typically come with a manufacturer's warranty covering defects in materials and workmanship.
For technical support, troubleshooting assistance beyond this manual, or to inquire about replacement parts, please contact Jebao customer service or the authorized seller from whom you purchased the product. Contact details can usually be found on the manufacturer's official websitus atanapi faktur pameseran anjeun.
