1. Bubuka
Thank you for choosing a Sharp washing machine. This manual provides essential information for the safe and efficient operation, installation, and maintenance of your new appliance. Please read this manual thoroughly before using the washing machine and keep it for future reference.
The Sharp ES-NFB612CWB is a slim, front-loading washing machine designed for household use, offering a 6 kg capacity and a maximum spin speed of 1200 revolutions per minute.
Gambar: Hareupeun view of the Sharp ES-NFB612CWB washing machine, showing the control panel, large black door, and white casing. This image illustrates the overall design and key components of the appliance.
2. Émbaran Kasalametan
Salawasna perhatikeun pancegahan kaamanan di handap ieu pikeun ngirangan résiko kahuruan, kejutan listrik, tatu jalma, atanapi karusakan alat.
- Kasalametan listrik: Pastikeun alat ieu disambungkeun ka stop kontak anu di-ground. Ulah nganggo kabel extension atanapi adaptor stop kontak anu seueur. Cabut heula listrik sateuacan beberesih atanapi pangropéa.
- Sambungan cai: Use new hose sets supplied with the appliance. Do not reuse old hose sets. Ensure all connections are tight to prevent leaks.
- Kasalametan Anak: Jauhkeun barudak sareng piaraan tina alat salami operasi. Ulah ngantep barudak maén dina atawa dina alat.
- Pamasangan: The appliance must be installed on a firm, level surface. Remove all transport bolts before use. Failure to do so can cause severe vibration and damage.
- Detergén: Use only detergents suitable for automatic washing machines. Store detergents out of reach of children.
- Pamakéan umum: Do not wash items that are soiled with flammable substances. Do not open the door forcefully during a cycle.
3. Setup jeung Instalasi
Pamasangan anu leres penting pisan pikeun pagelaran sareng umur panjang mesin cuci anjeun.
3.1 Ngabongkar bungkusan
Cabut sadaya bahan bungkus kalayan ati-ati. Pariksa alatna pikeun ayana karusakan nalika diangkut. Laporkeun langsung ka padagang ritel anjeun upami aya karusakan.
3.2 Ngaleupaskeun Bolts Angkutan
Before operating the machine, you must remove the transport bolts located at the rear of the appliance. These bolts secure the drum during transit. Keep the bolts for future transport if needed.
- Manggihan bolts angkutan dina panel tukang.
- Unscrew the bolts using an appropriate wrench.
- Pull out the bolts along with their rubber spacers.
- Selapkeun caps plastik disadiakeun kana liang.
3.3 Lokasi jeung Leveling
Place the washing machine on a solid, level floor. Avoid placing it on carpets or other soft surfaces that could obstruct ventilation. Use a spirit level to ensure the machine is perfectly level by adjusting the adjustable feet at the bottom.
3.4 Sambungan suplai cai
Connect the inlet hose to a cold water tap with a 3/4-inch thread. Ensure the connection is secure and there are no leaks. The water pressure should be between 0.1 MPa and 1 MPa.
3.5 Solokan Sambungan Selang
The drain hose can be placed into a standpipe (minimum 60 cm, maximum 100 cm from the floor) or connected to a sink trap. Ensure the hose is not kinked or obstructed.
3.6 Sambungan Listrik
Colokkeun kabel listrik kana stop kontak listrik grounded. Pastikeun voltage sareng frékuénsi cocog sareng spésifikasi dina piring rating alat.
4. Parentah Operasi
Turutan léngkah-léngkah ieu pikeun ngoperasikeun mesin cuci anjeun sacara efektif sareng aman.
4.1 Before the First Wash
Run an empty wash cycle at 60°C with a small amount of detergent to clean the drum and remove any manufacturing residues.
4.2 Ngamuat laundry
Sort laundry by fabric type, color, and degree of soiling. Open the door and load the laundry loosely into the drum, ensuring not to overload the machine. Close the door firmly.
4.3 Nambahkeun Detergent jeung Aditif
Pull out the detergent dispenser drawer. Add the appropriate amount of detergent to the main wash compartment and, if desired, fabric softener to its designated compartment. Refer to detergent packaging for dosage recommendations.
4.4 Milih Program Nyeuseuh
Turn the program selector knob to choose the desired wash program (e.g., Cotton, Synthetics, Delicates, Quick Wash). The display will show the default temperature and spin speed for the selected program.
4.5 Nyaluyukeun Pilihan
Use the option buttons on the control panel to adjust temperature, spin speed, or add extra functions like pre-wash or extra rinse, if available for the selected program.
4.6 Ngamimitian Daur Nyeuseuh
Press the 'Start/Pause' button to begin the wash cycle. The door will lock, and the machine will start filling with water.
4.7 Tungtung Daur
At the end of the cycle, the machine will signal with an audible alert or a message on the display. The door will unlock after a short delay. Remove the laundry promptly to prevent creasing.
5. Pangropéa jeung beberesih
Pangropéa rutin ngajamin kinerja optimal sareng manjangkeun umur mesin cuci anjeun.
5.1 Ngabersihan Exterior
Ngusap permukaan luar kalayan lemes, damp lawon. Ulah make cleaners abrasive atawa pangleyur.
5.2 Ngabersihan Dispenser Deterjen
Pull out the detergent dispenser drawer completely. Rinse it under running water to remove any detergent residue. Clean the housing of the dispenser with a brush. Reinsert the drawer.
5.3 Ngabersihan Drum
To prevent odors and mold, leave the door slightly ajar after each wash to allow the drum to air dry. Periodically run a maintenance wash (e.g., a hot cycle with no laundry and a descaling agent).
5.4 Ngabersihan Saringan Pompa
The pump filter should be cleaned regularly to prevent blockages. This is usually located at the bottom front of the machine behind a small cover.
- Place a shallow container under the filter cover to catch any residual water.
- Buka panutup saringan.
- Buka saringan lalaunan ka arah anu sabalikna tina jarum jam dugi ka cai mimiti ngocor.
- Once all water has drained, fully remove the filter.
- Bersihkeun saringan dina cai ngocor, miceun kokotor atanapi barang asing.
- Screw the filter back in clockwise and close the cover securely.
5.5 Protection ibun
If the appliance is located in an area subject to freezing temperatures, drain all water from the hoses and pump to prevent damage. Disconnect the water inlet hose and drain the water from the drum.
6. Cara ngungkulan
Before contacting service, try the following solutions for common issues.
| Masalah | Mungkin Cukang lantaranana | Solusi |
|---|---|---|
| Mesin teu ngamimitian | Teu aya daya; Panto teu ditutup; Program teu dipilih; Tombol start teu dipencet. | Check power supply; Close door firmly; Select program; Press 'Start'. |
| Taya eusian cai | Keran cai ditutup; selang inlet kinked; Tekanan cai rendah teuing. | Buka ketok cai; Ngalempengkeun selang; Pariksa suplai cai. |
| Cai teu draining | Selang solokan bengkok/tersumbat; Saringan pompa tersumbat. | Straighten hose; Clean pump filter (refer to Section 5.4). |
| Geter / noise anu kaleuleuwihi | bolts angkutan teu dipiceun; Mesin teu tingkat; Beban henteu rata. | Remove transport bolts (Section 3.2); Level machine (Section 3.3); Redistribute laundry. |
| Résidu detergent dina dispenser | Insufficient water pressure; Detergent clumping; Dispenser dirty. | Check water pressure; Use less detergent; Clean dispenser (Section 5.2). |
If the problem persists after trying these solutions, please contact an authorized service technician.
7. Spésifikasi Téknis
| Fitur | Spésifikasi |
|---|---|
| Modél | ES-NFB612CWB |
| merek | Seukeut |
| Tipe | Hareup-loading Mesin cuci |
| Kapasitas | 6 kg |
| Ukuran (H x W x D) | 85 cm x 60 cm x 41 cm |
| Max. Spin Speed | 1200 rpm |
| Voltage | 230V |
| Kelas Énergi | B |
8. Garansi jeung Rojongan
Your Sharp washing machine comes with a manufacturer's warranty. Please refer to the separate warranty card or documentation provided with your purchase for specific terms and conditions, including the warranty period and coverage details.
For technical support, service requests, or inquiries regarding spare parts, please contact Sharp customer service or your authorized dealer. Have your model number (ES-NFB612CWB) and purchase date ready when contacting support.
