SKMEI 2082 Digital Olahraga Watch Instruksi Manual

1. Produk Langkungview

The SKMEI 2082 is a digital sports wrist watch designed for active individuals. It features a clear LED display, multiple functions including alarm and stopwatch, and a durable silicone band. This manual provides instructions for setting up, operating, and maintaining your watch.

Gambar 1.1: Hareupeun view of the SKMEI 2082 Digital Sports Watch, showing the LED display.

Fitur konci:

• Digital time display with LED screen.
• Fungsi alarem.
• Fungsi Stopwatch.
• Lampu latar pikeun kaayaan cahaya nu kurang.
• Water resistance up to 5 ATM.
• Durable silicone band.

2. Setup jeung Konfigurasi Awal

Before using your watch, ensure the time and date are correctly set. The watch typically has four buttons: A (top-left), B (bottom-left), C (top-right), D (bottom-right).

Image 2.1: SKMEI 2082 watch on a wrist, illustrating the general button layout.

2.1 Nyetél Waktos sareng Tanggal:

1. In normal time display mode, press button B (Mode) repeatedly until the time setting mode is activated. This is usually indicated by flashing digits (e.g., seconds).
2. Pencét tombol D (Adjust/Reset) to cycle through the settings: seconds, hour, minute, month, date, day of the week.
3. Paké tombol C (Start/Set) to increase the flashing value. Hold C pikeun ngarobah nilai langkung gancang.
4. Once all settings are adjusted, press button B (Mode) to return to normal time display mode.

2.2 12/24 Hour Format:

While in time setting mode (seconds flashing), press button C pikeun ngaganti antara format 12 jam (kalayan indikator AM/PM) sareng 24 jam.

3. Parentah Operasi

3.1 Switching Modes:

Pencét tombol B (Mode) to cycle through the different modes: Time Display → Stopwatch → Alarm → Time Setting (if applicable, or another mode before returning to Time Display).

3.2 Ngagunakeun Stopwatch:

1. Pencét tombol B (Mode) until the stopwatch mode is displayed (usually indicated by "00:00:00").
2. Pencét tombol C (Start) to begin timing.
3. Pencét tombol C deui pikeun ngareureuhkeun stopwatch.
4. Pencét tombol D (Reset) to reset the stopwatch to zero while it is paused.
5. To resume timing after pausing, press button C.

3.3 Setting and Using the Alarm:

1. Pencét tombol B (Mode) until the alarm setting mode is displayed (usually indicated by "AL" or flashing alarm time).
2. Pencét tombol D (Adjust) to select the hour or minute digits to set.
3. Paké tombol C (Set) to adjust the hour and minute values.
4. Pencét tombol B (Mode) to confirm the alarm setting and exit.
5. To turn the alarm ON/OFF, in alarm mode, press button C. Ikon alarem bakal muncul / ngaleungit dina tampilan.
6. Nalika alarm disada, pencét tombol naon waé pikeun ngeureunkeunana.

3.4 Ngagunakeun Lampu Latar:

Pencét tombol A (Light) to illuminate the display for a few seconds in low-light conditions.

4. Pangropéa sarta perawatan

4.1 Tahan Cai:

The SKMEI 2082 watch is water-resistant up to 5 ATM (50 meters). This means it is suitable for daily use, hand washing, rain, and brief immersion in water. It is henteu suitable for hot water activities, diving, or prolonged underwater use. Do not press any buttons while the watch is submerged in water.

Gambar 4.1: Tukangeun view of the SKMEI 2082 watch, indicating 5 ATM water resistance and CR2016 battery type.

4.2 beberesih:

Ngusap wadah arloji jeung band ku lemes, damp cloth. Avoid using harsh chemicals or abrasive materials, as these can damage the watch's finish or silicone band.

4.3 Ngagantian Batré:

The watch uses a CR2016 battery. When the display becomes dim or functions become erratic, it may be time to replace the battery. Battery replacement should ideally be performed by a qualified watch technician to ensure proper sealing and water resistance.

5. Cara ngungkulan

• Pintonan kosong atanapi taram: Batré bisa jadi lemah atawa béak. Ganti batréna (CR2016).
• Waktuna salah: Setel deui waktos sareng tanggal numutkeun parentah dina Bagian 2.1. Pastikeun format 12/24 jam dipilih kalayan leres.
• Tombol henteu ngaréspon: Ensure the watch is not in a locked mode (if applicable, though not a common feature for this model). If the issue persists, a battery replacement might resolve it, or contact support.
• Cai dina jam tangan: If water condensation appears inside the watch, stop using it immediately and seek professional repair to prevent further damage.

6. Spésifikasi

Image 6.1: Dimensional diagram of the SKMEI 2082 watch.

7. Garansi jeung Rojongan

7.1 Émbaran Garansi:

Jam SKMEI 2082 ieu hadir sareng 6-bulan jaminan produsén covering manufacturing defects from the date of purchase. This warranty does not cover damage caused by misuse, accidents, unauthorized repairs, or normal wear and tear.

7.2 Rojongan Palanggan:

For any questions, technical assistance, or warranty claims, please contact SKMEI customer support through your retailer or the official SKMEI website. Please have your purchase receipt and watch model number (2082) available when contacting support.

You can visit the official SKMEI store for more information: Toko Resmi SKMEI