QttyElok R01Tuya Wireless WiFi Door Access Control System Kit with Magnetic Lock User Manual

1. Bubuka

This manual provides detailed instructions for the installation, operation, and maintenance of the QttyElok R01Tuya Wireless WiFi Door Access Control System Kit with Magnetic Lock. This system offers convenient and secure access control through multiple methods, including a smart mobile application, remote controls, and an exit button.

2. Eusi Paket

Punten parios yén sadaya komponén anu didaptarkeun di handap kalebet kana pakét anjeun:

• 1 x Tuya Remote Receiver
• 1 x Buzzer
• 1 x Power Adapter (DC12V / 2A)
• 2 x Remote Transmitters (433MHz)
• 1 x 180KG/350lbs Electric Magnetic Lock
• 1 x Tombol Kaluar Panto
• Nyambungkeun Kawat
• Manual Pitunjuk Bahasa Inggris

Gambar: Leuwihview of the QttyElok R01Tuya Door Access Control System Kit components.

3. Spésifikasi produk

Image: Dimensions of the remote control receiver unit.

Image: Detailed specifications and dimensions for the Door Exit Button and Remote Transmitter.

4. Instalasi jeung Wiring

Follow these steps to correctly install and wire your access control system. Ensure power is disconnected before beginning any wiring.

4.1 Diagram Kabel Di Luhurview

Image: Detailed wiring diagram showing connections between the main control board, speaker, exit button, magnetic lock, and power supply.

The system includes a main control board (Tuya Remote Receiver), a speaker (buzzer), an exit button, a 180KG magnetic lock, and a power supply. Connect the components as shown in the diagram. The magnetic lock is an NC (Normally Closed) type, meaning it locks when powered and unlocks when power is removed.

4.2 Step-by-Step Wiring

1. Connect the power adapter to the Tuya Remote Receiver's power input.
2. Connect the magnetic lock to the "LOCK" terminals on the receiver. Ensure correct polarity (red to positive, black to negative).
3. Connect the exit button to the "EXIT BUTTON" terminals on the receiver.
4. Connect the buzzer to the designated speaker terminals on the receiver.
5. Pastikeun sadaya sambungan aman sateuacan nerapkeun kakuatan.

4.3 Magnetic Lock Type (NC Model)

The included 180KG Electric Magnetic Lock operates as an NC (Normally Closed) type. This means the lock is engaged (locked) when power is supplied to it and disengages (unlocks) when the power supply is interrupted. This is a fail-safe mechanism, ensuring the door unlocks during a power failure.

5. Parentah Operasi

The QttyElok R01Tuya system offers multiple methods for unlocking your door.

5.1 Integrasi Aplikasi Tuya

The system integrates with the Tuya Smart APP, allowing you to control access remotely from your smartphone.

1. Unduh APLIKASI Tuya Smart ti toko aplikasi alat anjeun.
2. To enter pairing mode: Adjust the TIME switch on the receiver to 10 seconds. Press and hold the RF-Key button until the LED lights flash red and green alternately. Release the RF-Key.
3. Open the Tuya APP on your phone, click "Add Device", and search for nearby devices. Add the "WiFi+433 Switch" device.
4. Once paired, you can use the Tuya APP to unlock the door, manage members, and view door opening logs.

Image: Screenshots of the Tuya APP interface and instructions for pairing the device.

5.2 Operasi kadali jauh

The system supports up to 40 remote transmitters for convenient unlocking within a 30-meter range.

1. To pair a remote control: Adjust the TIME switch on the receiver to 0 seconds. Press the RF-Key button on the receiver until the green light flashes.
2. While the green light is flashing, press the button on your remote control. The red light on the receiver will illuminate, indicating successful pairing.
3. Once paired, press the remote control button to unlock the door.

5.3 Exit Button Operation

The wired exit button provides a simple and direct way to unlock the door from the inside.

• Press the "PUSH TO EXIT" button to momentarily unlock the door.

Image: Visual representation of the three available unlock methods: Tuya APP, Remote Control, and Exit Button.

5.4 Adjusting Locking Time Delay

The Tuya Remote Receiver allows adjustment of the locking delay to 0, 5, or 10 seconds. The default setting is 5 seconds.

• Locate the "TIME" switch on the Tuya Remote Receiver.
• Adjust the switch to your desired delay setting (0, 5, or 10 seconds).

5.5 Modeu operasi

The receiver supports three operating modes: Latched, Toggle, and Momentary. These modes determine how the lock behaves after an unlock command.

• Mode Dipasang: Adjust the internal button to the middle position. In this mode, the lock remains unlocked until a re-lock command is issued (e.g., pressing the remote again or using the app).
• Modeu Togél: Adjust the internal button to the leftmost position. After remote unlocking, the remote needs to be pressed once more to re-lock the door.
• Mode sakedapan: Adjust the internal button to the rightmost position. This mode automatically locks the door after a delay of 5 or 10 seconds (set by the TIME switch) following an unlock command.

5.6 Deleting Remote Controls

To remove paired remote controls from the system:

1. Adjust the TIME switch on the receiver to 0 seconds.
2. Press and hold the RF-Key button for 15 seconds until the green light flashes.
3. Release the RF-Key. All previously paired remote controls will be deleted.

6. Cara ngungkulan

• Sistem teu diaktipkeun: Check all power connections and ensure the power adapter is correctly plugged into a working outlet. Verify the power adapter output is DC12V.
• Magnetic lock not engaging/disengaging:
  • Ensure the magnetic lock is correctly wired to the "LOCK" terminals on the receiver.
  • Confirm the magnetic lock is receiving DC12V power.
  • Check the operating mode (Momentary, Latched, Toggle) to ensure it matches your intended behavior.
• Kadali jauh teu jalan:
  • Ensure the remote control is properly paired with the receiver (refer to Section 5.2).
  • Pariksa batré kadali jauh.
  • Verify you are within the 30-meter operating range.
• Tuya APP not connecting/controlling:
  • Ensure your smartphone has a stable internet connection (WiFi or mobile data).
  • Verify the Tuya Remote Receiver is connected to your WiFi network.
  • Coba deui prosés papasangan sakumaha anu dijelaskeun dina Bagian 5.1.
  • Check for any app updates.
• Buzzer teu disada: Check the wiring connection of the buzzer to the receiver.

7. Pangropéa

• Pariksa sadaya sambungan kabel sacara rutin pikeun tanda-tanda karusakan atanapi karusakan.
• Keep the magnetic lock and armature plate clean and free of debris to ensure proper contact and holding force.
• Periodically check remote control batteries and replace them as needed.
• Ensure the Tuya Smart APP is updated to the latest version for optimal performance and security.
• Clean the exterior of the components with a soft, dry cloth. Avoid using abrasive cleaners or solvents.

8. Garansi jeung Rojongan

For warranty information or technical support, please refer to the contact details provided with your purchase or visit the QttyElok official websitus. Simpen resi pameseran anjeun salaku bukti pameseran pikeun klaim garansi.