Pakakas Sistem Kontrol Aksés WiFi Pinter Nirkabel QttyElok R01Tuya (Tanpa Konci) Manual Instruksi

1. Bubuka

The QttyElok R01Tuya Wireless Smart WiFi Access Control System Kit provides a convenient and secure way to manage access to gates or doors. This system allows unlocking via a smartphone application, wireless remote transmitters, or an optional exit button. It is designed for easy installation and integration with various DC12V electric locks.

2. Émbaran Kasalametan

• Ensure all power is disconnected before installation or maintenance to prevent electrical shock.
• This device operates on DC12V. Using an incorrect power supply may damage the unit.
• Professional installation is recommended if you are unfamiliar with electrical wiring.
• Jauhkeun alat tina cai sareng kalembaban anu kaleuleuwihan.
• Ulah nyobian ngabongkar atawa ngalereskeun unit sorangan. Kontak personil mumpuni pikeun layanan.

3. Eusi Paket

Punten parios yén sadaya barang anu didaptarkeun di handap kalebet kana pakét anjeun:

• 1 x Remote Receiver
• 2 x Remote Transmitters
• 1 x adaptor kakuatan
• 1 x Buzzer
• 1 x Manual Inggris

Note: This kit does not include a door exit button or an electric lock. These components must be purchased separately.

Gambar 3.1: Leuwihview of the QttyElok R01Tuya Wireless Smart WiFi Access Control System Kit components, including the remote receiver, two remote transmitters, power adapter, and buzzer.

4. Produk Langkungview

4.1. Receiver Dimensions and Features

Gambar 4.1: Detil view of the receiver with dimensions (92mm x 72mm x 25mm) and icons representing key features: Tuya APP Unlock, Remote Control Unlock, Power Adapter, Low Power Consumption, and Easy Installation.

4.2. Connection Points and Settings

Image 4.2: Close-up of the receiver showing connection points for Power Adapter, Exit Button, Electric Locks, and the Lock Mode Select switch. It also highlights the Time Delay (0/5/10 seconds) and RF-Key for pairing/resetting.

4.3. Internal Board Components

Gambar 4.3: View of the receiver's internal circuit board, labeling the Tuya module, Power Supply, Exit Button, Lock, Speaker, Access Controller, RF-Key, Time Delay, and Operating Mode switch.

5. Spésifikasi

5.1. Tuya Remote Receiver

• Gawé Voltage: DC12V
• Frékuénsi Gawé: 433MHz
• Bahan: Plastik ABS
• Locking Time Delay: 0/5/10 seconds (adjustable)
• Modeu Gawé: Momentary / Latched / Toggle
• Mode konci: NC / NO (Fail safe / Fail secure)
• Kasaluyuan: Can connect to access controllers, electric locks, door exit buttons, and buzzers.
• Fitur pinter: Built-in Tuya module, supports WiFi Tuya app control.

5.2. Pamancar Jauh

• Gawé Voltage: 6VDC
• Frékuénsi Gawé: 433MHz
• Operasi ayeuna: 8mA
• Sumber Daya: 2x CR2016 batteries (included)
• Kahirupan batré: 50,000 cycles (tested)
• Tipe Encoding: Kode maneuh
• Tombol: 1
• Bahan Kasus: logam

5.3. adaptor kakuatan

• Input: AC100V-240V 50 / 60Hz
• Kaluaran: DC12V / 2A (2000mA)
• Panjang kabel: 1.5 méter

5.4. Dimensi Fisik

• Ukuran produk: 7.87 x 3.94 x 1.97 inci
• Beurat barang: 15.8 ons

6. Pamasangan

The QttyElok R01Tuya system is designed for straightforward installation. Follow the wiring diagram and instructions carefully.

6.1. Diagram Kabel

Image 6.1: Wiring diagram illustrating connections for the main control board, power plug, access controller, speaker, exit button, and various electric locks (magnetic lock, bolt lock, strike lock). Note that the access controller, electric locks, and exit button are not included in this package.

6.2. Pituduh Pidéo Instalasi

7. Operasi

The QttyElok R01Tuya system offers multiple methods for unlocking your door or gate.

Image 7.1: Visual representation of the three primary unlocking methods: using the Tuya mobile application, the wireless remote control, and an optional physical exit button.

7.1. Tuya APP Control

The Tuya app allows you to unlock your door from anywhere, manage users, and view access logs. For detailed instructions on connecting the Tuya app, refer to Video 6.2 (0:21-0:55) in the Installation section.

1. Unduh Aplikasi: Milarian pikeun "TuyaSmart" in your smartphone's app store and download it.
2. papasangan: Turutan léngkah anu digariskeun dina Video 6.2 (0:21-0:55). This involves adjusting the TIME switch to 10SEC, holding the RF-Key, and then adding the device in the Tuya app.
3. Muka konci: Long-press the Tuya icon within the app to unlock the door.
4. Manajemén pamaké: Click "Member management" to add or remove authorized users.
5. Log Aksés: Click the log icon to view a record of door opening events.

Image 7.2: Screenshots of the TuyaSmart app interface, showing the device discovery, member management, settings, and log viewing features. The image also depicts the receiver and a smartphone demonstrating the "Hold and unlock" function.

Image 7.3: Illustration of unlocking the door using both the Tuya app on a smartphone and the wireless remote control, highlighting the wireless connectivity.

7.2. Operasi Jauh Jauh

The included remote transmitters allow for convenient unlocking from up to 30 meters away. The system supports up to 40 remote controls. For a visual guide on connecting and deleting remote controls, refer to Video 6.2 (0:55-1:19 for pairing, 1:59-2:34 for deleting) in the Installation section.

1. papasangan:
   • Adjust the TIME switch on the receiver to 0 SEK.
   • Pencét éta RF-Key button. The green light will flash.
   • While the green light is flashing, press the button on the remote control. The red light on the receiver will illuminate, indicating successful pairing.
2. Muka konci: Press the button on the paired remote control to unlock the door.
3. Deleting Remotes:
   • Adjust the TIME switch on the receiver to 0 SEK.
   • Pencét jeung tahan tombol RF-Key button for 15 seconds until the green light flashes.
   • Release the RF-Key. All paired remote controls will be deleted.

7.3. Exit Button (Optional)

If an exit button is connected, simply press it to unlock the door from the inside.

8. Konfigurasi

8.1. Locking Time Delay Adjustment

The receiver allows you to adjust the time delay before the lock re-engages after unlocking. Use the WAKTU switch on the receiver to select 0, 5, or 10 seconds. The default setting is 5 seconds.

8.2. Operating Mode Selection

The receiver supports three operating modes: Momentary, Latched, and Toggle. Adjust the switch on the internal board (refer to Image 4.3) to select the desired mode. For a visual demonstration of these modes, refer to Video 6.2 (1:19-1:59) in the Installation section.

• Momentary Mode (M): (Switch to the rightmost position) The lock will automatically re-lock after a set delay (5 or 10 seconds). This is the default mode.
• Latched Mode (L): (Switch to the middle position) The lock remains unlocked after activation. It cannot be re-locked by remote or app after unlocking.
• Toggle Mode (T): (Switch to the leftmost position) After remote unlocking, the remote needs to be pressed once more to re-lock the door.

9. Cara ngungkulan

• Sistem teu ngaréspon: Check all power connections and ensure the power adapter is functioning correctly.
• Kadali jauh teu jalan:
  • Verify the remote control batteries (2x CR2016) are correctly installed and have sufficient charge.
  • Ensure the remote is paired with the receiver (refer to Section 7.2).
  • Check for obstructions between the remote and the receiver that might block the signal.
• Tuya APP not connecting:
  • Ensure your smartphone is connected to a stable 2.4GHz WiFi network.
  • Verify the receiver is in pairing mode during the app setup process.
  • Check your WiFi password and network settings in the Tuya app.
• Konci teu nyambung/teu nyambung:
  • Confirm the electric lock is correctly wired to the NC/NO ports on the receiver.
  • Check the selected operating mode (Momentary, Latched, Toggle) as it affects lock behavior.
  • Ensure the electric lock itself is functioning properly.

10. Garansi jeung Rojongan

For warranty information or technical support, please refer to the contact details provided with your purchase or visit the QttyElok official websitus. Simpen resi pameseran anjeun pikeun klaim jaminan.