Bubuka
This manual provides detailed instructions for the setup, operation, and maintenance of your SKMEI Digital Watch Model 2042. Please read this manual thoroughly to ensure proper use and to maximize the lifespan of your watch.
Gambar: Hareupeun view of the SKMEI 2042 digital watch highlighting key features like digital display, EL light, alarm, and 12/24-hour format.
Awasview
The SKMEI 2042 is a digital wristwatch featuring a durable ABS case, TPU strap, and multiple functions. It is designed for everyday wear and sports activities.
komponén:
- tampilan: Digital time, date, day, and other function indicators.
- Tombol: Typically four buttons for mode selection, light, start/stop, and reset.
- Tali: Thermoplastic Polyurethane (TPU) for comfort and durability.
- Kasus: ABS material.
- Panutup tukang: Beusi sténless.
Gambar: Tukangeun view of the SKMEI 2042 digital watch, showing the stainless steel back cover and strap attachment.
Setup sareng Operasi Dasar
Setup Awal:
- Cabut pilem pelindung: Before first use, carefully remove any protective film from the watch face.
- Daya Hurung: The watch is typically pre-installed with a battery and should be operational upon removal from packaging.
Image: A close-up of the SKMEI 2042 watch face, illustrating the removal of the protective film.
Netepkeun Waktos sareng Tanggal:
Note: Specific button labels and sequences may vary slightly. Refer to the watch's physical buttons for exact identification. Common button names are used below.
- Pencét éta MODÉ tombol sababaraha kali nepi ka mode setelan waktos diaktipkeun (biasana dituduhkeun ku kedip-kedip digit).
- Ngagunakeun éta RESET or MULAI tombol pikeun nyaluyukeun angka anu kedip-kedip (jam, menit, detik).
- Pencét éta MODÉ button again to cycle through the settings (hours, minutes, month, date, day of week).
- Sakali sadaya setelan leres, pencét tombol MODÉ tombol pikeun kaluar tina mode setelan.
Format 12/24-Jam:
In time display mode, press the RESET or MULAI tombol pikeun toggle antara 12-jam (kalawan AM / indikator PM) jeung format 24-jam.
Fungsi Operasi
EL Lampu tukang:
Pencét éta CAHAYA button (usually located on the top left) to illuminate the display for a few seconds in low-light conditions.
Fungsi Alarm:
- Pencét éta MODÉ button until the alarm mode is displayed.
- Pencét éta RESET tombol pikeun milih jam atawa menit pikeun nyetél.
- Ngagunakeun éta MULAI tombol pikeun nyaluyukeun waktos.
- Pencét MODÉ pikeun ngonfirmasi sareng kaluar.
- Pikeun ngaktipkeun/nganonaktipkeun alarm, pencét tombol MULAI button in alarm mode. An alarm icon will appear/disappear.
Fungsi Stopwatch:
- Pencét éta MODÉ tombol nepi ka modeu stopwatch ditampilkeun (biasana "00:00:00").
- Pencét éta MULAI tombol pikeun ngamimitian timing.
- Pencét MULAI deui pikeun reureuhan / neruskeun.
- Pencét éta RESET tombol pikeun ngareset stopwatch ka nol.
- Pikeun ngarékam waktos pamisah, pencét RESET while the stopwatch is running. The display will show the split time while the internal timer continues. Press RESET deui pikeun balik deui ka waktu ngajalankeun.
Timer Countdown:
If available, typically accessed via the MODE button.
- Pencét éta MODÉ button until the countdown timer mode is displayed.
- Ngagunakeun éta RESET jeung MULAI tombol pikeun nyetel waktu mundur anu dipikahoyong.
- Pencét MULAI pikeun ngamimitian mundur.
- Pencét MULAI deui pikeun reureuhan / neruskeun.
- Pencét RESET pikeun ngeureunkeun sareng ngareset timer.
Pangropéa sareng Perawatan
Tahan cai:
The SKMEI 2042 watch is rated for 50 meters (5ATM) water resistance. This means it is suitable for daily use, splashes, rain, and short periods of swimming. Ulah mencet sagala tombol bari arloji ieu submerged dina cai. Avoid hot water, steam, and prolonged exposure to water to prevent damage.
Image: The SKMEI 2042 digital watch partially submerged in water, illustrating its water resistance.
beberesih:
Ngusap wadah arloji jeung tali kalayan lemes, damp cloth. Avoid using chemical cleaners, as they may damage the materials.
Ngagantian batré:
When the display becomes dim or functions become erratic, the battery may need replacement. It is recommended to have the battery replaced by a qualified watch technician to ensure proper sealing and water resistance.
Panyimpenan:
Simpen arloji dina tempat anu tiis sareng garing jauh tina sinar panonpoé langsung sareng suhu anu ekstrim nalika henteu dianggo.
Pamérésan masalah
- Pintonan kosong atanapi taram: Batré bisa jadi lemah atawa béak. Ganti batréna.
- Tombol henteu ngaréspon: Ensure the watch is not in a locked mode (if applicable). If the issue persists, the internal mechanism may require inspection.
- Waktu teu akurat: Re-set the time according to the "Setting Time and Date" section. If inaccuracy continues, the watch may require servicing.
- Cai dina jam tangan: Immediately stop using the watch and seek professional repair. Water damage is typically not covered under warranty if proper water resistance guidelines were not followed.
spésifikasi
| Fitur | Rincian |
|---|---|
| Nomer modél | 2042 |
| Tipe tampilan | Digital |
| Bahan Kasus | ABS |
| Bahan Tali | Thermoplastic Polyurethane (TPU) |
| Tahan cai | 50 Méter (5ATM) |
| Jinis Gerakan | Kuarsa |
| Diaméter Kasus | 4.1 séntiméter |
| Kandel Kasus | 1 Centimeter |
| Item Beurat | 35.6 gram |
| Fungsi | EL Light, Alarm, Stopwatch, Countdown Timer, Auto Calendar, Week Display, 12/24-Hour Format |
Image: Diagram illustrating the dimensions of the SKMEI 2042 digital watch, including case height, strap/lug width, case width, and case thickness.
Garansi sareng Rojongan
Your SKMEI Digital Watch Model 2042 comes with a Garansi kawates. For specific details regarding warranty coverage and duration, please refer to the warranty card included with your purchase or contact SKMEI customer support.
Pikeun pitulung atanapi patarosan salajengna, mangga buka SKMEI resmi websitus atanapi ngahubungan puseur layanan otorisasi maranéhanana.
