1. Bubuka
The DIGITUS DN-45004 Mobile Desktop Charging Cabinet is designed for storing and charging portable devices such as tablets and smartphones. It features 10 USB-C charging ports and an integrated UV-C lamp for enhanced hygiene. This cabinet is suitable for public institutions like schools, providing a centralized and secure location for device management and charging.
2. Warnings Kasalametan
- This product must be placed on a flat, stable surface to prevent slipping or tipping.
- Ensure the power cable is securely connected to a grounded outlet.
- Ulah overload sirkuit listrik.
- Keep the cabinet away from water or excessive moisture.
- Do not attempt to open or repair the cabinet yourself. Refer to qualified service personnel.
- UV-C lamp emits ultraviolet light. Avoid direct exposure to eyes and skin. Ensure the cabinet door is closed during UV-C operation.
3. Eusi Paket
Pastikeun yén sadaya item aya dina bungkusan:
- 1 x Digitus DN-45004 Charging Cabinet
- 2 x Keys for the front door
- 1 x Power Cable (C19 to protective contact plug, 2m)
- 1 x Manual Pamaké
4. Setélan
- Ngabongkar bungkusan: Carefully remove the charging cabinet from its packaging.
- panempatan: Place the cabinet on a flat, stable, and dry surface. Ensure adequate ventilation around the unit. The anti-slip feet provide stability.
- Sambungan Daya: Connect the provided power cable to the C19 input on the rear of the cabinet and then to a suitable electrical outlet (110/220 VAC, 50/60 Hz).
- Initial Power Check: If the unit does not power on, check the internal circuit breaker located behind the rear panel. This breaker may trip during transport. To access, unscrew the four screws on the rear panel, remove it, and reset the blue lever on the circuit breaker to the 'On' position.
5. Parentah Operasi
5.1 Alat ngecas
- Buka panto: Use the provided keys to unlock and open the front door of the cabinet.
- Selapkeun Alat: Place your tablets or smartphones into the designated slots. Note that this cabinet is primarily designed for tablets and smartphones; larger laptops may not fit.
- Connect to USB-C Ports: Connect your devices to the USB-C charging ports located at the front of each slot.
- Monitor Status Ngecas: Integrated LED indicators above each port show the charging status:
- Beureum: Alat ayeuna nuju dicas.
- héjo: Charging process is complete, or no device is connected.
- Tutup sareng Konci: Once devices are connected, close and lock the front door for security.
5.2 UV-C Lamp Operasi
The integrated UV-C lamps provide a sterile environment for your devices.
- Activate UV-C: Locate the switch for UV-C lighting (refer to Figure 5.1). Toggle the switch to activate the UV-C lamps.
- Ensure Door is Closed: For safety and effective sanitation, ensure the cabinet door is securely closed while the UV-C lamp aktip.
- Deactivate UV-C: Toggle the switch again to turn off the UV-C lamps.
5.3 Sistim cooling
The cabinet includes an integrated fan and ventilation slots for active cooling. The fan automatically activates when the internal temperature exceeds 40°C to prevent overheating of devices and internal components.
6. Pangropéa
- beberesih: Disconnect the power before cleaning. Use a soft, dry cloth to wipe the exterior surfaces. Do not use abrasive cleaners or solvents.
- Ventilasi: Ensure ventilation slots are not obstructed to maintain proper airflow.
- UV-C Lamp: UV-C lamp has a limited lifespan. If the lamp stops working, contact customer support for replacement options.
7. Cara ngungkulan
| Masalah | Mungkin Cukang lantaranana | Solusi |
|---|---|---|
| Cabinet does not power on. | Power cable not connected, power outlet issue, or internal circuit breaker tripped. | Ensure power cable is firmly connected. Test the power outlet. Check and reset the internal circuit breaker (refer to Section 4. Setup). |
| Alat teu ngecas. | Device not properly connected, faulty USB-C cable, or device issue. | Ensure the device is correctly plugged into the USB-C port. Try a different USB-C cable. Test the device with another charger. Check the LED indicator (should be red when charging). |
| UV-C lamp teu hurung. | UV-C switch off, lamp failure, or door not fully closed. | Ensure the UV-C switch is in the 'On' position. Verify the cabinet door is securely closed. If the issue persists, the lamp meureun perlu ngagantian. |
| Laptops do not fit in the slots. | The cabinet is designed for smaller portable devices. | This model is optimized for tablets and smartphones. Please check device dimensions against cabinet specifications. |
8. Spésifikasi
| Fitur | Rincian |
|---|---|
| merek | DIGIT |
| Nomer modél | DN-45004 |
| Warna | Hideung (RAL 9005) |
| Bahan | Alloy Steel |
| Ukuran (H x W x D) | 345 x 360 x 370 mm |
| Internal Shelf Depth | 294 mm |
| Port ngecas USB-C | 10 |
| USB-C Output per Port | 18 W (5 V / 3 A, 9 V / 2 A, 12 V / 1.5 A) |
| Max USB-C Output | 180 W |
| Input kakuatan | C19; 110 / 220 VAC, 50/60 Hz, 16 A |
| Total Kaluaran Kakuatan | 3500 W |
| Niiskeun | Integrated fan, automatic activation at >40°C |
| Kaamanan | Steel front door with 3-point lock |
| Fitur husus | UV-C lamps for hygiene, LED charging indicators |
| Alat nu cocog | Smartphone, Tablet |
9. Garansi jeung Rojongan
Warranty information for the Digitus DN-45004 Mobile Desktop Charging Cabinet is not available in the provided product data. Please refer to the manufacturer's official websitus atanapi titik pameseran anjeun pikeun istilah sareng kaayaan jaminan anu lengkep.
For technical support, troubleshooting assistance, or inquiries regarding spare parts, please contact DIGITUS customer service directly. You can often find contact information on the manufacturer's websitus atanapi dina bungkusan produk.
For more information about DIGITUS solutions, visit: Assmann Solutions