Sensea Emmy Wall-Mounted Soap Dispenser User Manual

Bubuka

This manual provides comprehensive instructions for the installation, operation, and maintenance of your Sensea Emmy wall-mounted soap dispenser. Please read this manual thoroughly before installation and use to ensure proper function and longevity of the product.

Émbaran Kasalametan

• Ensure all mounting hardware is securely fastened to prevent the dispenser from falling.
• Ulah kencengkeun teuing sekrupna, sabab ieu tiasa ngaruksak produk atanapi permukaan pemasanganna.
• Tetep kaluar jangkauan sahiji barudak salila instalasi.
• Use appropriate tools for drilling and mounting.

Eusi pakét

Pariksa yén sadaya komponén aya sateuacan ngamimitian pamasangan:

• 1x Sensea Emmy Soap Dispenser Unit (Glass bottle with pump)
• 1x Wall Mounting Bracket (Zamak, Chrome-plated steel)
• 2x Pasang Sekrup
• 2x Wall Plugs/Anchors

Image: The Sensea Emmy soap dispenser in its original packaging, illustrating the main unit, wall mount, and included hardware (screws and wall plugs). Key dimensions are also visible: width 121mm, height 170mm, and projection from wall 96mm.

Setup sareng Instalasi

The Sensea Emmy soap dispenser is designed for wall mounting using the provided screws and wall plugs.

1. Pilih Lokasi: Choose a suitable wall location, ensuring it is at a convenient height and away from direct water spray if possible.
2. Tanda titik pangeboran: Hold the wall mounting bracket against the wall at the desired height. Use a pencil to mark the two drilling points through the holes on the bracket.
3. liang bor: Using an appropriate drill bit for your wall type (e.g., masonry bit for concrete/brick, wood bit for studs), drill holes at the marked points. Ensure the depth is sufficient for the wall plugs.
4. Selapkeun colokan témbok: Insert the provided wall plugs into the drilled holes. Tap gently with a hammer if necessary until they are flush with the wall surface.
5. Pasang Bracket: Align the wall mounting bracket with the inserted wall plugs. Insert the screws through the bracket holes and tighten them firmly into the wall plugs. Do not overtighten.
6. Mount Dispenser: Carefully slide the glass soap dispenser bottle into the chrome-plated holder on the mounted bracket. Ensure it is seated securely.

Dimensions for Installation Planning:

• Overall Width: Approximately 121 mm
• Overall Height: Approximately 170 mm
• Projection from Wall (Depth): Approximately 96 mm

Parentah Operasi

1. Ngeusian Dispenser:
   • Remove the pump mechanism by unscrewing it counter-clockwise from the glass bottle.
   • Pour your preferred liquid soap or lotion into the glass bottle. Do not overfill.
   • Screw the pump mechanism back onto the bottle clockwise until secure.
2. Dispensing sabun:
   • Place your hand under the nozzle.
   • Press down firmly on the pump head to dispense soap.
   • Release the pump head to allow it to return to its original position.

Pangropéa

Regular cleaning will help maintain the appearance and functionality of your soap dispenser.

• Bersihan Luar: Wipe the chrome-plated surfaces and glass bottle with a soft, damp cloth. Use a mild, non-abrasive cleaner if necessary.
• Pompa beberesih: If the pump becomes clogged or sticky, remove it from the bottle and rinse it thoroughly under warm water. You can pump warm water through the mechanism to clear any residue.
• Hindarkeun: Ulah make cleaners abrasive, scouring pads, atawa bahan kimia kasar, sabab ieu bisa ngaruksak finish.

Pamérésan masalah

spésifikasi

Garansi sareng Rojongan

The Sensea Emmy soap dispenser comes with a Garansi 2 taun ti tanggal dibeuli, ngawengku defects manufaktur.

For technical support, warranty claims, or replacement parts, please contact your retailer or the Sensea customer service department. Please retain your proof of purchase for warranty validation.