Buku Panduan Pangguna Panghapus Kapalan Listrik PRITECH

1. Bubuka

The PRITECH Electric Callus Remover is a rechargeable, waterproof foot care device designed to effectively remove calluses, hard, and dead skin from the feet. It features multiple grinding rollers, adjustable speeds, and a "Turbo" mode for enhanced performance. This manual provides detailed instructions for safe and effective use, maintenance, and troubleshooting.

2. Émbaran Kasalametan

Pancegahan Kasalametan Penting:

• This appliance is intended for personal use only. Do not use it for any medical conditions or on broken or irritated skin.
• Jauhkeun tina jangkauan barudak.
• Do not immerse the device completely in water for extended periods, despite its waterproof rating.
• Ensure the device is turned off before cleaning or changing rollers.
• Use only the original data cable for charging. The recommended charging voltage nyaéta 5V / 1A.
• Pernyataan ngeunaan suplemén dietary teu acan dievaluasi ku FDA sareng henteu dimaksudkeun pikeun ngadiagnosa, ngubaran, ngubaran, atanapi nyegah panyakit atanapi kaayaan kaséhatan.

3. Naon dina Box

Upon unboxing your PRITECH Electric Callus Remover, please ensure all components are present:

• 1 x PRITECH Electric Callus Remover Device
• 1 x Hard Grinding Roller (pre-installed or separate)
• 1 x Medium Grinding Roller
• 1 x Fine Grinding Roller
• 1 x Kabel Ngecas USB Tipe-C
• 1 x Sikat Pembersih
• 1 x Panutup Pelindung
• 1 x Kantong Kantong
• 1 x Manual Pamaké (dokumén ieu)

Figure 3.1: Contents of the PRITECH Electric Callus Remover kit, including the main device, three interchangeable roller heads (hard, medium, fine), and a USB-C charging cable.

4. Setélan

4.1 Ngecas Alat

Before first use, fully charge the callus remover. The device features an LED display that shows the battery percentage.

1. Connect the provided USB Type-C charging cable to the charging port at the bottom of the device.
2. Plug the other end of the USB cable into a compatible 5V/1A USB power adapter (not included), power bank, car charger, or laptop.
3. The LED display will show the charging progress. A full charge (100%) typically takes about 3 hours and provides up to 90 minutes of continuous operation.

Figure 4.1: The device is Type-C rechargeable, offering convenient charging options for home and travel use.

5. Parentah Operasi

5.1 Powering on / Pareum tur adjustment speed

• To turn the device ON, press and hold the power button for 3 seconds. The LED display will illuminate, showing the battery percentage and current speed mode.
• Press the power button briefly to switch between two speed modes (Level 1 and Level 2).
• To activate the "TURBO" mode, press and hold the dedicated "TURBO" button. This provides an instant 50% speed boost for up to 8 seconds, ideal for stubborn calluses.
• To turn the device OFF, press and hold the power button for 3 seconds.

5.2 Selecting and Using Roller Heads

The callus remover comes with three types of grinding rollers, each designed for different levels of calluses:

• Hard Grinding Roller: For removing heavy, thick, and stubborn calluses.
• Medium Grinding Roller: For moderate calluses and smoothing rough skin.
• Fine Grinding Roller: For delicate skin, polishing, and daily maintenance.

Figure 5.1: Choose the appropriate roller head based on the condition of your skin.

5.3 Application Steps

The PRITECH Electric Callus Remover can be used on both wet and dry feet.

1. Prepare your feet: For best results, especially with thick calluses, it is recommended to soak your feet in warm water for 10-15 minutes to soften the skin. Dry your feet thoroughly before use if you prefer dry grinding.
2. Select a roller: Choose the appropriate grinding roller and attach it to the device (refer to Section 6.2 for roller replacement).
3. Begin grinding: Turn on the device. Gently glide the roller over the callused areas of your feet. Apply light pressure and move the device in small circular motions. Do not press too hard or stay in one area for too long to avoid discomfort or injury.
4. Use "TURBO" mode (optional): For particularly tough spots, press the "TURBO" button for an extra burst of power.
5. Pariksa kamajuan: Periodically check your skin. Stop when the desired smoothness is achieved.
6. moisturize: After use, turn off the device and apply a moisturizing foot cream to keep your feet soft and hydrated.

Figure 5.2: The device is suitable for both dry and wet use.

6. Pangropéa

6.1 Ngabersihan Alat

Regular cleaning ensures optimal performance and hygiene. The device is IPX7 waterproof, allowing for easy rinsing.

1. Pastikeun alat dipareuman sateuacan beberesih.
2. Remove the protective cover and empty any collected dead skin from the dust collection bin.
3. Use the provided cleaning brush to remove any remaining debris from the roller head.
4. Rinse the roller head and the device under running water. For thorough drying, you can turn the device on briefly and place it in its cap to remove excess moisture through rotary drying.
5. Wipe the body of the appliance with a clean, dry cloth.
6. Ngidinan sadaya bagian ka hawa garing lengkep sateuacan reassembling atanapi nyimpen.

Figure 6.1: The IPX7 waterproof design allows for easy rinsing under running water.

Figure 6.2: Utilize the one-touch rotary drying feature to remove excess moisture after cleaning.

6.2 Replacing Roller Heads

To maintain optimal performance, replace the grinding rollers when they show signs of wear or reduced effectiveness.

1. Pastikeun alat dipareuman.
2. Locate the release button on the side of the roller head.
3. Press the release button and gently pull the roller head away from the device.
4. Align the new roller head with the slots on the device and push it in until it clicks securely into place.

7. Cara ngungkulan

If you encounter any issues with your PRITECH Electric Callus Remover, please refer to the following common problems and solutions:

8. Spésifikasi

Figure 8.1: Product specifications and manufacturer information as displayed on the packaging.

9. Garansi jeung Rojongan

PRITECH offers a 1-year free warranty for this product. To activate your warranty and for any support inquiries, please use the following information:

• Aktipkeun jaminan: Scan the QR code found on the product packaging or visit the official PRITECH website. It is recommended to activate your warranty within 2 weeks of purchase.
• Websitus: https://www.pritechbeauty.com
• Rojongan Email: service@pritechbeauty.com
• Pabrikan: Wenzhou Pritech Industrial Co., Ltd.
• Alamat: No.29 Yugang Road West, Wenzhou, Zhejiang, China

For any feedback or concerns, PRITECH encourages you to reach out directly. Your satisfaction is important to them.

10. Video produk

No official seller videos are available for embedding at this time. The available videos are from influencers and do not meet the criteria for inclusion in this manual.