Bubuka
Thank you for choosing the VEVOR 20 Inch Oscillating Wall Mount Fan. This manual provides essential information for the safe and efficient operation, installation, and maintenance of your fan. Please read all instructions carefully before use and retain this manual for future reference.
Parentah Kasalametan
- Always ensure the fan is securely mounted to a solid wall surface before operation.
- Ulah ngoperasikeun kipas upami kabel atanapi colokanna rusak. Upami kabelna rusak, éta kedah digentos ku produsén, agén layananna, atanapi jalmi anu mumpuni pikeun nyingkahan bahaya.
- Jauhkeun ramo, rambut, sareng pakean anu leupas tina bilah kipas salami operasi.
- Do not use the fan in areas where flammable liquids or gases are stored.
- Cabut kipas tina stop kontak sateuacan beberesih atanapi ngalakukeun pangropéa naon waé.
- This fan is designed for both indoor and outdoor use, but avoid direct exposure to heavy rain or extreme weather conditions unless specified for waterproof models.
- Pastikeun sumber kakuatan cocog voltage requirements of the fan (115 Volts).
Eusi pakét
Saatos ngabongkar bungkusan, mangga pariksa yén sadaya barang anu didaptarkeun di handap aya sareng henteu ruksak:
- 1 x Industrial Wall Fan
- 1 x Manual Pamaké
- Mounting Hardware (screws, anchors, bracket)
Setup sareng Instalasi
The VEVOR 20 Inch Wall Mount Fan is designed for easy installation on any solid wall. Follow these steps for secure mounting:
- Pilih Lokasi: Select a solid wall surface capable of supporting the fan's weight (approximately 11.2 pounds). Consider areas like patios, garages, workshops, or basements for optimal airflow.
- Tanda titik pangeboran: Position the mounting bracket against the wall at the desired height. Use a pencil to mark the locations for drilling the anchor holes. Ensure the bracket is level before marking.
- liang bor: Using an appropriate drill bit for your wall material (e.g., masonry bit for concrete/brick), drill holes at the marked points. Insert the provided wall anchors into the drilled holes.
- Pasang Bracket Pasang: Align the mounting bracket with the installed anchors. Secure the bracket to the wall using the provided screws. Ensure all screws are tightened firmly for stability.
- Pasangkeun Kipas kana Braket: Carefully lift the fan and align its mounting points with the bracket. Secure the fan to the bracket using the provided bolts, washers, and nuts. Tighten securely, allowing for vertical tilt adjustment.
- Sambungkeun Kakuatan: Plug the fan's 4.92 ft / 1.5 m power cord into a compatible 115V electrical outlet.
Parentah Operasi
Your VEVOR wall mount fan offers multiple settings for customized comfort:
- Hurungkeun/Pareuman: The fan is operated using a pull chain switch. Pull the chain once to turn the fan on to its lowest speed.
- Setélan laju: The fan features 3-speed settings. Pull the chain repeatedly to cycle through Low, Medium, and High speeds. Pulling it again after High will turn the fan off.
- Fungsi Osilasi: The fan provides a 90-degree oscillating function to cover a wide area. This function is typically controlled by a separate pull chain or a switch on the motor housing. Refer to the specific control mechanism on your fan to activate or deactivate oscillation.
- Penyesuaian Dengdekkeun: The fan head can be tilted vertically to direct airflow precisely where needed. Loosen the adjustment knob on the side of the fan housing, set the desired angle, and then tighten the knob to secure it.
Pangropéa
Regular maintenance ensures the longevity and optimal performance of your VEVOR fan:
- beberesih: The fan features aluminum blades and a rugged metal construction designed for easy disassembly and cleaning. Periodically wipe down the fan blades and grille with a soft, damp lawon pikeun miceun lebu sareng kokotor. Pastikeun kipas tos dicabut sateuacan dibersihkeun.
- Motor: The motor is fully sealed and requires no lubrication. Do not attempt to open the motor housing.
- Panyimpenan: If storing the fan for an extended period, clean it thoroughly, cover it to protect from dust, and store it in a dry location.
Pamérésan masalah
Upami anjeun ngalaman masalah sareng kipas anjeun, tingali léngkah-léngkah ngungkulan masalah umum ieu:
| Masalah | Mungkin Cukang lantaranana | Solusi |
|---|---|---|
| Kipas angin teu hurung | Taya catu daya Pull chain not activated | Check if the fan is plugged in and the outlet is functional. Pull the chain firmly to cycle through speeds. |
| Aliran hawa handap | Fan blades are dirty Fan is on a low speed setting | Unplug and clean the fan blades and grille. Increase the fan speed using the pull chain. |
| Kipas angin ribut | Bagéan leupas Fan blades are dirty | Unplug and check for any loose screws or components. Tighten if necessary. Unplug and clean the fan blades. |
| Osilasi teu jalan | Oscillation function is off | Activate the oscillation function using its dedicated control (pull chain or switch). |
spésifikasi
Key technical specifications for your VEVOR 20 Inch Wall Mount Fan:
| Fitur | Spésifikasi |
|---|---|
| merek | VEVOR |
| Ngaran modél | Wall Mount Fan, 20 Inch |
| Ukuran | 20 inci |
| Warna | Hideung |
| Gaya | Ngayun |
| Sumber Daya | Kabel Listrik |
| Voltage | 115 volt |
| Wattage | 70 watt |
| Kapasitas Aliran Udara | Max. 4650 CFM |
| Laju | 1450 rpm |
| Jumlah Tingkat Daya | 3 |
| Tingkat Noise | 55 desibel |
| Dimensi produk | 26 "D x 22.2" W x 27.2" H |
| Item Beurat | 11.2 pon |
| Panjang Tali | 4.92 ft / 1.5 m |
| Bahan | All Metal (Aluminum Blades) |
| Pamakéan jero rohangan / outdoor | Jero rohangan, Luar |
| Sertifikasi | ETL Didaptarkeun |
Garansi sareng Rojongan
VEVOR products are designed for durability and performance. For warranty information, technical support, or any questions regarding your product, please refer to the contact information provided on the VEVOR official website or your purchase documentation. Our customer service team is available to assist you.
Kunjungi Toko VEVOR: VEVOR Toko on Amazon
