1. Bubuka
Thank you for choosing the Jebao ELW-10M Smart Wave Maker Circulation Pump. This device is designed to create natural wave patterns and circulation in your aquarium, promoting a healthy environment for aquatic life. The ELW-10M features advanced SINE wave technology for quiet operation, Wi-Fi control via a smartphone app, and a 3D adjustable output direction. This manual provides essential information for the safe and efficient use of your wave maker.
Fitur konci:
- Wi-Fi control (iOS and Android) and manual controller with LCD display.
- SINE wave technology for ultra-quiet and stable performance.
- 3D rotation angle for adjustable water flow direction.
- No exposed copper elements, safe for both marine and freshwater aquariums.
- Compact design with magnetic base for easy installation.
2. Parentah Kasalametan
Please read and understand all safety instructions before operating the device. Failure to follow these instructions may result in product damage, injury, or electric shock.
- Kasalametan listrik: Always disconnect the power supply before performing any maintenance or installation. Ensure your hands are dry when handling the power adapter and controller. Do not operate if the power cord or plug is damaged.
- Kasalametan cai: This device is designed for submersible use in aquariums. Ensure all electrical connections are kept dry. Do not operate the pump out of water.
- panempatan: Position the pump securely using the magnetic base. Ensure it is not obstructed by decorations or substrate.
- Barudak jeung Pets: Simpen alat sareng komponénna tebih tina jangkauan barudak sareng piaraan.
- Dimaksudkeun pamakéan: Use this product only for its intended purpose as an aquarium wave maker.
3. Eusi Paket
Bungkus kotakna kalawan ati-ati sareng pastikeun sadaya barang aya sareng dina kaayaan anu saé. Upami aya barang anu leungit atanapi ruksak, mangga ngahubungi pangecér anjeun.
- Jebao ELW-10M Wave Maker Pump
- Smart Controller with LCD Display
- Adaptor Daya AC
- Dasar Magnetik
Figure 3.1: Complete package contents of the ELW-10M wave maker.
4. Setup jeung Instalasi
Follow these steps to properly install your Jebao ELW-10M wave maker.
- Posisi Pompa: Select a suitable location inside your aquarium, typically on the side or back glass, ensuring adequate clearance from substrate and decorations. The pump should be fully submerged.
- Ngapasangkeun Dasar Magnét: Place the wave maker pump inside the aquarium at the desired location. Align the external magnetic base on the outside of the aquarium glass directly opposite the pump. The strong magnets will secure the pump in place.
angka 4.1: Tutup-up view of the ELW-10M pump head.
- Adjusting Flow Direction: The pump features a 3D rotation angle. Adjust the pump head to direct the water flow as needed for optimal circulation in your aquarium.
- Nyambungkeun Controller: Connect the pump cable to the designated port on the smart controller.
- Sambungan Daya: Connect the AC power adapter to the controller, then plug the adapter into a standard electrical outlet.
- Setup Wi-Fi (Opsional): For advanced control, download the Jebao app (available for iOS and Android) from your device's app store. Follow the in-app instructions to connect your wave maker to your home Wi-Fi network (2.4GHz only).
5. Operasi
The ELW-10M wave maker can be operated via its manual controller or through the Jebao smartphone app.
Kontrol Manual:
The LCD display controller allows for direct adjustment of pump settings. Refer to the controller's specific button functions for changing modes, flow intensity, and other parameters. Typically, buttons are used to cycle through different wave patterns (e.g., constant flow, pulse mode) and adjust flow rate.
Kontrol Aplikasi Wi-Fi:
Once connected to Wi-Fi, the Jebao app provides comprehensive control over your wave maker. This includes:
- Real-time adjustment of flow speed and wave patterns.
- Scheduling custom operating times and modes.
- Access to advanced features and settings not available on the manual controller.
- Monitoring device status.
Ensure your smartphone is connected to the same 2.4GHz Wi-Fi network as the wave maker during initial setup and for reliable control.
6. Pangropéa
Regular maintenance ensures the longevity and optimal performance of your wave maker.
- Ngabersihkeun Impeller: Over time, algae and debris can accumulate on the impeller, reducing efficiency. Disconnect power, remove the pump from the aquarium, and carefully disassemble the front cage to access the impeller. Clean the impeller and its housing with a soft brush and clean water.
- Bersihan Perumahan: Wipe down the pump housing and magnetic base with a soft cloth to remove any buildup.
- Pamariksaan kabel: Periodically inspect the power cable and pump cable for any signs of wear or damage. Replace if necessary.
- Reassembly: Ensure all parts are correctly reassembled before returning the pump to the aquarium and reconnecting power.
7. Cara ngungkulan
If you encounter issues with your ELW-10M wave maker, refer to the following common problems and solutions:
- Pompa Teu Jalan:
- Check if the power adapter is securely plugged into both the controller and the wall outlet.
- Ensure the pump cable is firmly connected to the controller.
- Pariksa yén stop kontak listrik geus fungsi.
- Inspect the impeller for any obstructions or debris that might be preventing it from spinning. Clean if necessary.
- Weak Flow/Reduced Performance:
- Clean the impeller and pump housing to remove any algae or mineral buildup.
- Ensure the pump is fully submerged and not drawing air.
- Check the controller settings to ensure the flow rate is set to the desired level.
- Masalah Sambungan Wi-Fi:
- Confirm your Wi-Fi network is 2.4GHz. The device does not support 5GHz networks.
- Ensure your smartphone is connected to the same 2.4GHz network during setup.
- Restart your Wi-Fi router and the wave maker controller.
- Ensure the wave maker is within range of your Wi-Fi router.
- Pump Moving/Sliding on Glass:
- Ensure the magnetic base is properly aligned and securely attached to both sides of the aquarium glass.
- Check for any debris or film between the magnets and the glass that might reduce grip.
- Verify the aquarium glass thickness is within the recommended range for the magnetic base.
Upami masalah tetep saatos nyobian solusi ieu, mangga ngahubungi dukungan palanggan.
8. Spésifikasi
Detailed technical specifications for the Jebao ELW-10M Smart Wave Maker Circulation Pump:
| Fitur | Spésifikasi |
|---|---|
| Modél | ELW-10M |
| merek | Jebao |
| Laju Aliran Max | 1056 GPH (Galon Per Jam) |
| Dianjurkeun Ukuran tank | 30-50 galon |
| Sumber Daya | AC (ngalangkungan adaptor) |
| Voltage | DC 24V |
| Konsumsi Daya | 10W |
| Pump Dimensions (approx.) | 2-1/4" diameter x 1-1/2" (without magnet) |
| Bahan | palastik |
| Warna | Hideung |
| Konektipitas | Wi-Fi (2.4GHz) |
Figure 8.1: Product label with specifications on the ELW-10M pump.
9. Garansi jeung Rojongan
This product comes with a manufacturer's warranty against defects in materials and workmanship. The duration and terms of the warranty may vary by region and retailer. Please retain your proof of purchase for warranty claims.
For technical support, warranty inquiries, or replacement parts, please contact the retailer where you purchased the product or visit the official Jebao websitus pikeun informasi kontak layanan palanggan.
