Buku Panduan Pangguna Saklar PoE++ Terkelola Industri 8-Port AXIS D8208-R

1. Bubuka

This manual provides comprehensive instructions for the installation, operation, and maintenance of the Axis Communications D8208-R Industrial 8-Port Managed PoE++ Switch. This device is designed for robust industrial environments, offering reliable network connectivity and Power over Ethernet (PoE++) capabilities for connected devices. Please read this manual thoroughly before using the product to ensure proper and safe operation.

2. Émbaran Kasalametan

Perhatikeun pancegahan kaamanan di handap ieu pikeun nyegah karusakan produk sareng mastikeun kasalametan pangguna:

• Sumber Daya: Use only the specified power supply for this device. Ensure the power source meets the voltage jeung sarat ayeuna.
• Lingkungan: Install the switch in an environment that complies with its operating temperature and humidity specifications. Avoid exposure to direct sunlight, excessive heat, moisture, or corrosive substances.
• Ventilasi: Ensure adequate ventilation around the device to prevent overheating. Do not block ventilation openings.
• Pamasangan: Installation should be performed by qualified personnel in accordance with local electrical codes and regulations.
• Pangropéa: Do not attempt to open or service the device yourself. Refer all servicing to qualified service personnel.
• Kabel: Use appropriate and certified cables for all connections.

3. Eusi Paket

Verify that all items are present in the package. If any item is missing or damaged, contact your supplier.

• AXIS D8208-R Industrial 8-Port Managed PoE++ Switch
• Guide Instalasi Gancang
• Mounting Kit (e.g., DIN rail clip, screws)
• Terminal Block Connectors (for power input)

4. Produk Langkungview

The AXIS D8208-R is a robust industrial switch designed for demanding applications. It features multiple Ethernet ports with Power over Ethernet capabilities and advanced management features.

4.1 Layout Panel hareup

Gambar 1: Hareupeun view of the AXIS D8208-R Industrial Switch. This image displays the front panel of the switch, highlighting the various Ethernet ports, power input terminals, LED indicators, and the console port. Ports 1-4 are 1G PoE++ ports, ports 5-8 include 1G and 2.5G PoE++ capabilities, and ports 9-10 are 10G SFP+ ports.

Gambar 2: Detil hareup view of the AXIS D8208-R Industrial Switch. This image provides a closer look at the port configuration and LED indicators. It shows the two 10G SFP+ uplink ports (9 and 10) at the bottom, the console port, and the reset button. The power input terminals are visible on the right side.

4.2 Components Description

• Port Ethernet (1-4): 1 Gigabit Ethernet ports with PoE++ (802.3bt) support.
• Port Ethernet (5-8): 1 Gigabit and 2.5 Gigabit Ethernet ports with PoE++ (802.3bt) support.
• 10G Ports (9-10): 10 Gigabit SFP+ uplink ports for high-speed connections.
• Power Input (P1, P2): Redundant power input terminals for enhanced reliability.
• Port konsol: RJ45 port for local management and configuration via a serial connection.
• Tombol Reset: Dipaké pikeun ngareset alat ka standar pabrik atawa reboot.
• Indikator LED:
  • SYS: Indikator status sistem.
  • P1, P2: Power input status indicators.
  • ALM: Indikator alarem.
  • RM, RC: Redundancy Management / Redundancy Control indicators.

5. Setélan

5.1 Pamasangan

The AXIS D8208-R is designed for DIN rail mounting.

1. Attach the DIN rail clip (if not pre-installed) to the rear of the switch using the provided screws.
2. Hook the top edge of the DIN rail clip onto the DIN rail.
3. Dorong handapeun saklar pageuh ka arah rel DIN nepi ka ngaklik kana tempatna.
4. Pastikeun saklarna dipasang pageuh kana rel DIN.

5.2 Sambungan Daya

The switch supports redundant power inputs (P1 and P2) for increased reliability.

1. Ensure the power source is turned off before making any connections.
2. Connect the positive (+) and negative (-) wires from your DC power supply to the corresponding terminals on the provided terminal block connector for P1.
3. Insert the terminal block connector into the P1 power input port on the switch.
4. (Optional) For redundant power, repeat steps 2 and 3 for the P2 power input.
5. Once all connections are secure, turn on the power supply. The P1 and/or P2 LEDs should illuminate.

5.3 Sambungan Jaringan

Connect network devices and uplink connections.

• Standard Devices: Connect your network devices (e.g., IP cameras, access points) to ports 1-8 using standard Ethernet cables. These ports will provide PoE++ power if the connected device supports it.
• Uplink: For high-speed uplink to your core network, insert compatible SFP+ transceivers into ports 9 and 10, then connect fiber optic cables.

5.4 Konfigurasi Awal

switch bisa ngonpigurasi via a web-based interface or a command-line interface (CLI) through the console port.

• Web panganteur: Connect a computer to any Ethernet port on the switch. The switch will typically obtain an IP address via DHCP or use a default static IP. Refer to the Quick Installation Guide for the default IP address and login credentials.
• Port konsol: Connect a serial cable from your computer to the console port on the switch. Use a terminal emulation program (e.g., PuTTY) with the specified serial settings (e.g., 115200 baud, 8 data bits, no parity, 1 stop bit, no flow control) to access the CLI.

6. Nyuping

6.1 Indikator LED

Monitor the LED indicators for the operational status of the switch.

6.2 Manajemén jeung Konfigurasi

The AXIS D8208-R is a managed switch, offering a range of configuration options for network optimization and security.

• Webdumasar GUI: Aksés saklar web antarmuka ngaliwatan standar web browser to configure VLANs, QoS, port settings, PoE management, security features, and more.
• CLI: For advanced users, the Command Line Interface provides granular control over all switch functions.
• SNMP: The switch supports SNMP for integration with network management systems.

7. Pangropéa

7.1 beberesih

To maintain optimal performance, periodically clean the exterior of the switch.

• Pastikeun yén kakuatan geus dipegatkeun saméméh beberesih.
• Anggo kaén anu lembut sareng garing pikeun ngusap permukaan luar.
• Do not use liquid or aerosol cleaners, as they may damage the device.
• Jaga liang ventilasi tetep bersih tina lebu sareng runtah.

7.2 Apdet firmware

Pariksa Komunikasi Axis sacara rutin websitus kanggo apdet firmware panganyarna. Apdet firmware tiasa nyayogikeun fitur énggal, paningkatan kinerja, sareng paningkatan kaamanan.

• Unduh firmware anu cocog file from the official Axis Communications support page for your model.
• Follow the instructions provided with the firmware update package for the correct update procedure, typically performed via the web panganteur.

8. Cara ngungkulan

If you encounter issues with your AXIS D8208-R switch, refer to the following common troubleshooting steps.

• Henteu aya kakuatan:
  • Check power cable connections to the switch and the power source.
  • Verify the power supply is functioning correctly and providing the correct voltage.
  • Ensure the P1/P2 LEDs are illuminated.
• Henteu aya konektipitas jaringan:
  • Check Ethernet cable connections for both the switch and the connected device.
  • Verify the link/activity LEDs on the respective port are active.
  • Pastikeun alat anu nyambung parantos dihurungkeun sareng dikonfigurasi kalayan leres.
  • Check switch configuration (VLANs, port status) via the web panganteur atanapi CLI.
• Alat PoE Henteu Diaktipkeun:
  • Ensure the connected device is PoE compatible and within the switch's PoE budget.
  • Check the PoE status for the port in the switch's management interface.
  • Verify the Ethernet cable is a standard Cat5e/6 or higher.
• Ngaksés Web Interface Fails:
  • Confirm your computer's IP address is in the same subnet as the switch, or that DHCP is functioning.
  • Try accessing the switch via the console port to verify its IP configuration.
  • Pupus cache panyungsi anjeun atanapi cobian browser anu sanés.
• Pabrik Reset: If issues persist and you need to restore default settings, press and hold the reset button for approximately 10-15 seconds until the SYS LED changes behavior, then release. Perhatosan: Ieu bakal mupus sadaya konfigurasi khusus.

9. Spésifikasi

10. Garansi jeung Rojongan

For detailed warranty information, technical support, and additional resources, please visit the official Axis Communications websitus.

Websitus: www.axis.com

Contact Axis Communications support for assistance with product installation, configuration, or troubleshooting beyond the scope of this manual.