1. Produk Langkungview
The Inateck FE2016 is a high-performance external enclosure designed for 2.5-inch SATA Solid State Drives (SSDs) and Hard Disk Drives (HDDs). It features USB 3.2 Gen 2 connectivity, offering data transfer speeds up to 6Gbps. The enclosure includes a protective silicone case and an internal shock-absorbing sponge for enhanced drive security and durability.
2. Eusi Paket
Gambar 2.1: Eusi pakét
Punten parios yén sadaya barang aya dina pakét anjeun:
- 1 × Inateck FE2016 Hard Drive Enclosure
- 1 × USB Data Cable (50 cm)
- 1 × Shock-absorbing Sponge
- 1 × Instruksi Manual
3. Spésifikasi
| Fitur | Rincian |
|---|---|
| Modél | FE2016-BK |
| Drive anu Kompatibel | 2.5-inch SATA SSDs/HDDs (7mm/9.5mm thickness) |
| Panganteur | USB 3.2 Gen 2 (Type-C to Type-A cable included) |
| Laju Mindahkeun Data | Nepi ka 6Gbps |
| Dirojong OS | Windows 7/8/10/11, Mac OS, Linux |
| Bahan | Silikon (wadah) |
| Diménsi | 13.11 x 8.61 x 1.8 cm |
| Beurat | 109 g |
| Fitur | UASP, TRIM, Shock-absorbent, Tool-free installation |
4. Pitunjuk Instalasi
4.1 Kompatibilitas Drive
Figure 4.1: Compatible Drive Types
The Inateck FE2016 enclosure supports 2.5-inch SATA SSDs and HDDs with a thickness of either 7mm or 9.5mm. Ensure your drive meets these specifications before installation.
4.2 Installing Your Drive
Figure 4.2: Drive Installation
- Gently slide open the top cover of the Inateck FE2016 enclosure.
- Connect your 2.5-inch SATA SSD or HDD to the internal SATA connector within the enclosure. Ensure the connection is firm and secure.
- Place the included shock-absorbing sponge on top of the drive to prevent movement and provide additional protection.
- Slide the top cover back into place until it clicks, securing the drive within the enclosure.
5. Operasi
5.1 Nyambungkeun ka Komputer Anjeun
Gambar 5.1: Kompatibilitas Sistem Operasi
After installing your drive, connect the Inateck FE2016 enclosure to your computer using the provided USB data cable. The enclosure is plug-and-play and compatible with Windows 7/8/10/11, Mac OS, and Linux operating systems without requiring any additional driver installation.
For new drives, you may need to initialize and format the drive through your operating system's disk management utility before it appears in your file ngajajah.
5.2 Data Transfer Performance
Figure 5.2: USB 3.2 Gen 2 Speed Comparison
The enclosure utilizes the USB 3.2 Gen 2 protocol, enabling data transfer speeds of up to 6Gbps. For optimal performance, ensure your computer's USB port also supports USB 3.2 Gen 2. The UASP (USB Attached SCSI Protocol) and TRIM functions further optimize transfer efficiency and contribute to the longevity of your SSDs.
Note: Only SSDs can deliver data rates up to 6Gbps. Traditional HDDs will operate at their maximum mechanical speed.
6. Maintenance and Protection
6.1 Dual-Layer Protection
Figure 6.1: Dual-Layer Protection Design
The Inateck FE2016 is engineered with dual-layer protection to safeguard your valuable data. This includes a robust external silicone case and an internal shock-absorbing sponge. The silicone case provides a protective barrier against external impacts and prevents scratches on surfaces.
Figure 6.2: Protective Silicone Case in Use
The silicone case is designed to be shock-absorbent and drop-resistant, minimizing the risk of damage from accidental drops. Its soft texture also ensures that the enclosure will not scratch your laptop or other devices when placed nearby.
6.2 beberesih
To clean the enclosure, gently wipe it with a soft, dry cloth. Avoid using harsh chemicals or abrasive materials, as these may damage the surface or silicone case.
7. Cara ngungkulan
- Drive teu kadeteksi:
- Ensure the drive is properly seated in the enclosure and the SATA connector is firm.
- Coba sambungkeun kandang ka port USB anu béda dina komputer anjeun.
- Verify the USB cable is securely connected at both ends.
- Check your computer's Disk Management (Windows) or Disk Utility (Mac OS) to see if the drive is recognized but uninitialized or unformatted.
- Test the enclosure with a different 2.5-inch SATA drive, if available, to rule out a drive issue.
- Kecepatan transfer anu laun:
- Ensure you are connected to a USB 3.2 Gen 2 (or at least USB 3.0) port on your computer. Older USB 2.0 ports will limit speeds.
- Verify the drive itself is capable of high speeds (SSDs generally perform faster than HDDs).
- Ulah mindahkeun loba leutik files simultaneously, as this can reduce overall transfer rates.
- Enclosure feels loose or drive rattles:
- Ensure the shock-absorbing sponge is correctly placed on top of the drive inside the enclosure.
- Confirm the enclosure cover is fully closed and latched.
8. Garansi jeung Rojongan
Inateck products come with a standard manufacturer's warranty. For specific warranty terms, technical support, or service inquiries, please refer to the warranty card included with your product or visit the official Inateck websitus. Punten tahan bukti pameseran anjeun pikeun klaim garansi.
For further assistance, you may contact Inateck customer support through their official channels.
