ComMarker B4 20W Fiber Laser Engraver Machine User Manual

1. Bubuka

This manual provides essential instructions for the safe and efficient operation, setup, and maintenance of your ComMarker B4 20W Fiber Laser Engraver Machine. Please read this manual thoroughly before using the device.

The ComMarker B4 20W is a versatile 2-in-1 desktop and handheld fiber laser marking machine, compatible with LightBurn and EzCad2 software. It is designed for high-precision engraving on a variety of materials including metals (stainless steel, aluminum, gold, silver, alloy, copper), jewelry, and certain painted products and non-transparent plastics.

Image: The ComMarker B4 20W Fiber Laser Engraver Machine, showcasing its compact design and included 110x110mm and 200x200mm lenses.

2. Émbaran Kasalametan

WARNING: This product contains a Class 1 Laser. Always wear appropriate 1064nm laser safety goggles during operation.

• Ensure the workspace is well-ventilated to avoid inhaling fumes from engraved materials.
• Ulah pernah ningali langsung kana sinar laser atanapi kana pantulan.
• Jauhkeun barudak sareng tanaga anu henteu sah tina mesin operasi.
• Ulah ngukir bahan anu gampang kaduruk atanapi ngabeledug.
• Biasakeun diri anjeun sareng lokasi sareng fungsi tombol eureun darurat.
• Pastikeun grounding ditangtoskeun tina mesin.
• Refer to IEC 60825-1 Report Number. 2401T29446E-SF and FDA Accession No.: 2210871-000 for compliance details.

Image: A pair of 1064nm laser safety goggles, essential protective equipment for operating the laser engraver.

3. Eusi Paket

Pastikeun yén sadaya item anu didaptarkeun di handap aya dina pakét anjeun:

• 1x B4 Machine
• 1x 110mm x 110mm Lens
• 1x 200mm x 200mm Lens
• 1 x adaptor kakuatan
• 1x Foot Switch
• 1x Positioner
• 1x USB Drive (containing software and drivers)
• 1 x Panguasa
• 1 x Kabel Data
• 1x Allen Wrench Set
• 1x 1064nm Goggles
• 2x Paperboard (for testing)
• 2x Steel Plate (for testing)
• 1x Auxiliary Holder
• 1x Material Package (sample materials)

Gambar: Hiji leuwihview of the ComMarker B4 laser engraver and all its included accessories, such as lenses, cables, safety goggles, and sampbahan na.

4. Parentah Setup

1. Ngabongkar bungkusan: Sacara saksama miceun sadaya komponén tina bungkusan. Pariksa karusakan pengiriman barang.
2. Majelis:
   • Place the laser head assembly onto the base unit. Secure it using the provided screws and Allen wrench.
   • Attach the desired field lens (110x110mm or 200x200mm) to the laser head. Ensure it is securely fastened.
3. Sambungan Daya: Connect the power adapter to the machine and then to a grounded 110V power outlet.
4. Sambungan USB: Connect the data cable from the machine to your computer.
5. Pamasangan parangkat lunak:
   • Selapkeun drive USB anu disayogikeun kana komputer anjeun.
   • Install the EzCad2 software and necessary drivers. For LightBurn compatibility, ensure you have the correct version and drivers installed for your operating system (Windows 7/8/10/11, MAC).
6. Pangaluyuan Fokus Awal:
   • Place a test material on the work platform.
   • Use the electric lifting mechanism (up/down buttons on the unit) to adjust the height of the laser head until the red light focusing guides converge into a single, sharp point on the material surface.

Image: Diagram illustrating the electric lifting mechanism for precise height adjustment of the laser head, crucial for focusing.

5. Parentah Operasi

5.1. Basic Engraving Process

1. Nyiapkeun Desain: Create or import your design in EzCad2 or LightBurn software. Supported formats include BMP, GIF, JPG, JPEG, DXF, DST, AI, etc.
2. Penempatan Bahan: Place the material to be engraved on the work platform. Use the auxiliary holder or positioner if needed for stability.
3. Penyesuaian fokus: Adjust the laser head height using the electric lifting buttons until the red light guides achieve optimal focus on the material surface.
4. Setélan Parameter: In the software, set appropriate laser parameters (power, speed, frequency, passes) based on the material type and desired engraving depth. Refer to the software manual for detailed parameter guidance.
   • Laser Panjang Gelombang: 1064 nm
   • Nyirian Speed: 0-15000mm / s
   • Frékuénsi: 20-60kHz
   • Minimum Line Width: 0.01mm
   • Engraving Depth: 0.3-0.5mm (typical)
5. Praview Area ukiran: Anggo prasarat perangkat lunakview function to ensure the design is positioned correctly on the material.
6. Mimitian ukiran: Ensure safety goggles are worn. Press the start button in the software or use the foot switch to begin the engraving process.
7. Prosés Monitor: Observe the engraving process. In case of any issue, immediately press the emergency stop button.

5.2. Handheld Operation

The B4 machine can be detached from its base for handheld operation, allowing for engraving on larger or irregularly shaped objects. Follow these steps:

1. Detach Laser Head: Carefully detach the laser head assembly from the vertical column.
2. Sambungkeun Daya sareng Data: Ensure power and data cables are securely connected for handheld use.
3. Fokus Manual: For handheld use, manual focusing is critical. Maintain a consistent distance between the laser head and the material surface to ensure proper focus. The red light guides will assist in this.
4. Pancegahan Kasalametan: Exercise extreme caution during handheld operation. Ensure the laser path is clear and stable. Always wear safety goggles.

Image: The ComMarker B4 demonstrating its 90-degree rotating vertical arm, enabling flexible engraving positions and handheld use.

5.3. Bahan anu Cocog

The ComMarker B4 fiber laser engraver is suitable for marking and engraving a wide range of materials:

• logam: Stainless steel, aluminum, gold, silver, alloy, copper, brass, titanium, etc.
• Perhiasan: Rings, pendants, bracelets, watches.
• Lain: Pens, tags, tumblers, most painted products, and non-transparent plastics.

Catetan: For optimal results on specific materials, test on scrap pieces first to determine the best laser settings.

5.4. Kompatibilitas Parangkat Lunak

The ComMarker B4 is compatible with industry-standard laser engraving software, including LightBurn and EzCad2. It supports various graphic formats for design import.

Image: An illustration of the ComMarker B4's wide software compatibility, including Windows and Mac operating systems, and support for LightBurn and EzCad2, alongside various graphic file format.

6. Pangropéa

Pangropéa rutin ngajamin umur panjang sareng kinerja optimal tina engraver laser anjeun.

• Ngabersihan lensa: Periodically clean the field lens with a soft, lint-free cloth and lens cleaning solution. Avoid abrasive materials.
• Ngaleungitkeun lebu: Keep the machine free from dust and debris. Use compressed air to clean vents and internal components. The machine includes dust shields at the back of the work area for extended service life.
• Pamariksaan kabel: Regularly check all cables for wear, damage, or loose connections.
• Apdet parangkat lunak: Keep your EzCad2 or LightBurn software updated to the latest version for improved performance and features.
• Kaayaan Lingkungan: Operate the machine in a clean, dry environment with stable temperature and humidity.

Gambar: Hiji ngabeledug view of the ComMarker B4 base unit, highlighting the internal components and the presence of dust shields for enhanced durability.

7. Cara ngungkulan

8. Spésifikasi

• model: B4-20W
• Sumber laser: 20W Max Fiber Laser
• Masukan Voltage: 110V
• Panjang gelombang laser: 1064 nm
• Laju nyirian: 0-15000mm / s
• Frékuénsi: 20-60kHz
• Kasaluyuan Sistim: Windows 7/8/10/11, MAC (LightBurn)
• Supported Graphics Formats: BMP, GIF, JPG, JPEG, DXF, DST, AI, etc.
• Minimum Line Width: 0.01 mm
• Engraving Depth: 0.3-0.5mm
• Included Lenses: 110x110mm, 200x200mm
• Ukuran produk: 3.94 x 3.94 x 3.94 inci
• Beurat barang: 37.9 pon
• Sertifikasi: IEC 60825-1 Report Number. 2401T29446E-SF, FDA Accession No.: 2210871-000, Class 1 Laser Product (Power output 1.95mW)

9. Garansi jeung Rojongan

ComMarker provides customer support for their products. For technical assistance, warranty claims, or service inquiries, please refer to the contact information provided with your purchase or visit the official ComMarker websitus.

The product is covered by a standard return policy (30 days for refund/replacement) as per purchase terms.

Pikeun pitulung salajengna, anjeun tiasa nganjang ka ComMarker Store on Amazon.

10. Video produk