Okin 2-Pin Y Splitter Cable Power Cord Replacement (4.6ft & 0.66ft)

1. Produk Langkungview

The Okin 2-Pin Y Splitter Cable is designed to provide a multi-functional power solution for electric furniture. This cable allows a single power supply transformer to power two motors simultaneously, commonly found in electric recliners and lift chairs. It features a 2-pin hybrid plug (one round, one flat) for connection to the transformer and two 2-pin sockets with clips for motor attachment. This product is ideal for replacing damaged cords or expanding existing power systems.

Image 1: The Okin 2-Pin Y Splitter Cable, showing the main cable and two branch cables.

2. Émbaran Kasalametan

Always disconnect power from the main power supply before installing or removing the splitter cable.
Ensure all connections are secure and free from damage before restoring power.
Do not expose the cable to water or excessive moisture.
Avoid placing heavy objects on the cable or bending it sharply, as this can cause damage.
If the cable appears damaged, discontinue use immediately and replace it.

3. Eusi Paket

1 x Okin 2-Pin Y Splitter Cable Power Cord (Main cable: 4.6 ft, Branch cables: 55 inches and 8 inches)

Note: Motor and transformer are not included.

4. Setup jeung Instalasi

Follow these steps to correctly install your Okin Y Splitter Cable:

Pegatkeun Daya: Ensure the electric recliner or lift chair is unplugged from the wall outlet to prevent electrical hazards.
Identipikasi sambungan: Locate the power supply transformer and the motor connection ports on your electric furniture.
Connect to Transformer: Take the 2-pin hybrid plug (one round, one flat) of the Okin Y splitter cable and securely connect it to the output port of your power supply transformer.
Connect to Motors: Attach each of the two 2-pin sockets with clips from the Y splitter cable to the corresponding input ports on your recliner motors. Ensure the clips are fully engaged for a secure connection.
Ngatur kabel: Route the cables neatly to avoid pinching or tripping hazards.
Mulangkeun Daya: Once all connections are secure, plug the electric recliner or lift chair back into the wall outlet.

Diagram showing Okin Y Splitter Cable connections to transformer and motors

Image 2: Connection diagram illustrating how to connect the Y splitter cable to a power supply transformer and two recliner motors.

5. Parentah Operasi

Once the Okin Y Splitter Cable is correctly installed, the operation of your electric recliner or lift chair remains unchanged. Use the existing controls (hand remote or integrated buttons) of your furniture to operate the motors as usual. The splitter cable simply facilitates power distribution from a single source to two motors.

6. Pangropéa

beberesih: Wipe the cable with a dry, soft cloth. Do not use liquid cleaners.
Pamariksaan: Periodically inspect the cable for any signs of wear, cuts, or damage to the insulation or connectors.
Panyimpenan: If storing the cable, coil it loosely. Avoid tight coiling or kinking, which can damage the internal wires.
Lingkungan: Keep the cable away from extreme temperatures, direct sunlight, and areas where it might be chewed by pets or damaged by furniture movement.

7. Cara ngungkulan

Masalah	Mungkin Cukang lantaranana	Solusi
No power to either motor.	Main power supply unplugged. Faulty power supply transformer. Y splitter cable not securely connected to transformer. Damaged Y splitter cable.	Check wall outlet and main power cord. Test transformer with a single motor if possible, or replace. Ensure the 2-pin hybrid plug is fully inserted into the transformer. Pariksa kabelna bisi aya karusakan anu katingali; gentos upami diperyogikeun.
Only one motor receives power.	Loose connection to the non-working motor. Motor lepat. Damage to one branch of the Y splitter cable.	Check the 2-pin socket connection to the non-working motor. Test the motor directly if possible, or swap connections to isolate the issue. Inspect the specific branch cable for damage; replace the Y splitter if damaged.

8. Spésifikasi

Jumlah modél: R5.216.01.024D
Main Cable Length: 1.4 méter (4.6 suku)
Branch Cable Lengths: 140 cm (55 inci) jeung 20 cm (8 inci)
Connector Type (Input): 2-pin hybrid plug (one round, one flat)
Connector Type (Output): Two 2-pin sockets with clips
Bahan: High-quality pure copper core
Beurat barang: Kira-kira 2.89 ons
Ukuran Paket: 8.7 x 6.34 x 1.14 inci

9. Kasaluyuan

This Okin 2-Pin Y Splitter Cable is compatible with a wide range of electric recliners and lift chairs that utilize a 2-pin hybrid connection for their power supply and motors. Known compatible brands include:

Okin
Dewert
Lazyboy
kareueus
Catnapper
Limos

Always verify the plug design of your existing components to ensure compatibility before purchase.

10. Garansi jeung Rojongan

For any questions, concerns, or support regarding your Okin 2-Pin Y Splitter Cable, please contact Okin customer service. Refer to your product packaging or the Okin official websitus pikeun inpormasi kontak sareng detil jaminan anu paling ayeuna.

	Parentah Majelis pikeun YB2213 Power Lift Recliner Kursi Lengkah-demi-hambalan pituduh assembly pikeun YB2213 kakuatan lift korsi recliner, kaasup eusi pakét, léngkah sambungan, sarta parentah wiring pikeun kakuatan sarta remotes. Fitur panas sareng fungsi urut.
	OKIN HSW306 5-Pin mun 7-Pin Jauh Controllers Guide ngagantian Lengkah-demi-hambalan parentah pikeun ngaganti hiji OKIN HSW306 5-pin recliner jauh controller jeung model 7-pin, kaasup wiring bypass, léngkah instalasi, jeung asesoris dianjurkeun.
	Okin Systems Panungtun Ngungkulan: Ngalereskeun Korsi Angkat sarta Pangropéa Pituduh ngungkulan komprehensif pikeun Okin Systems dipaké dina korsi angkat. Diajar ngadiagnosa sareng ngalereskeun masalah umum sareng kadali leungeun, trafo, motor, sareng kacang spindle. Ngawengku tips instalasi.
	OKIN RF.31.24.01 Jauh Control System Pamaké Manual Manual pamaké komprehensif pikeun OKIN RF.31.24.01 22-konci sistem kadali jauh, detailing fungsi tombol, prosedur setting posisi, sareng komponenana sistem pikeun ranjang adjustable.
	OKIN CB3433A Control Box Fungsi Instruksi sarta Guide Operasi Dokumén ieu nyayogikeun instruksi fungsi anu lengkep pikeun kotak kontrol OKIN CB3433A, komponén pikeun sistem jati anu tiasa diatur ku OKIN, perusahaan Phoenix Mecano. Ieu outlines konfigurasi listrik, ngajelaskeun panganteur kotak kontrol, sarta ngécéskeun operasi rupa actuators (sirah, suku, lumbar), motor urut, sarta lampu RGB underbed. Pituduh ogé nyertakeun indikator LED, prosedur papasangan, pilihan konektipitas (SYNC, USB, UART), syarat kakuatan, sareng kalebet peringatan pangaturan FCC sareng ISED RSS. Ditulis ku Jarek ti Divisi R&D.
	Sistem Kolom Ganda OKIN S2-2#: Manual Instruksi & Panduan Operasi Pituduh lengkep pikeun Sistem Kolom Ganda OKIN S2-2#. Diajar kumaha ngoperasikeun, nyetel wates, ngungkulan kasalahan, sareng ngartos spésifikasi téknis pikeun méja anu jangkungna tiasa disaluyukeun.

Okin R5.216.01.024D