Grandstream GDS3712 Single Button HD IP Video Door System User Manual

Bubuka

This manual provides comprehensive instructions for the installation, operation, maintenance, and troubleshooting of the Grandstream GDS3712 Single Button HD IP Video Door System. Please read this manual thoroughly before attempting to install or operate the device to ensure proper functionality and safety.

The Grandstream GDS3712 is an HD IP Video Door System designed for secure access control and monitoring. It features powerful video resolution, robust construction, and SIP video streaming capabilities, making it suitable for various security applications.

Émbaran Kasalametan

Perhatikeun pancegahan kaamanan di handap ieu nalika instalasi sareng operasi:

• Ensure all power connections are secure and meet local electrical codes.
• Ulah ngalaan alat ka suhu ekstrim, kalembaban, atawa sinar panonpoé langsung.
• Hindarkeun nempatkeun alat di deukeut médan éléktromagnétik anu kuat.
• Ngan nganggo asesoris anu ditunjuk ku produsén.
• Ulah nyobian muka atawa ngalereskeun alat sorangan. Rujuk sadayana jasa ka tanaga anu mumpuni.
• Anggo alat pelindung pribadi (PPE) anu pas nalika dipasang.

Eusi pakét

Pastikeun yén sadaya item aya dina pakét anjeun:

• Grandstream GDS3712 Unit
• Pamasangan Bracket sareng Screws
• Diiringkeun kabel
• Quick Installation Guide (This manual serves as the detailed guide)

Image: Grandstream GDS3712 unit with included mounting accessories.

Produk Leuwihview

The GDS3712 is a robust IP video door system designed for reliable access control and surveillance. Key features include:

• Pidéo High-Definition: Supports resolutions up to 1080p for clear visual identification.
• Integrated Relays: Two relays for electric lock and alarm output, and two alarm inputs for exit buttons and door sensors.
• SIP Compatibility: Enables video streaming to NVRs, video intercom stations, IP phones, and smartphones simultaneously.
• Konstruksi awét: Logam casing provides weatherproof and vandal-resistant protection.
• Widang Widang tina View: Built-in hemispheric camera offers 180-degree wall-to-wall coverage.

Gambar: Hareupeun view of the GDS3712, highlighting the camera lens, call button, and speaker/microphone grille.

Instalasi jeung Setup

1. Pasang Alat

1. Pilih Lokasi: Select a suitable outdoor or indoor location, ensuring clear line of sight for the camera and easy access for visitors. Consider mounting height for optimal facial recognition.
2. Nyiapkeun Wiring: Route necessary Ethernet (PoE recommended) and control wiring through the wall to the mounting point.
3. Bracket Aman: Use the provided screws to securely attach the mounting bracket to the wall.
4. Sambungkeun Wiring: Connect the Ethernet cable to the GDS3712's RJ45 port. If using external power, connect the power adapter. Connect alarm inputs/outputs and electric lock relays as required. Refer to the wiring diagram in the full technical datasheet for detailed connections.
5. Gantelkeun Alat: Carefully align the GDS3712 unit with the mounting bracket and secure it in place.

2. Initial Network Configuration

1. Daya Hurung: Apply power to the GDS3712. The device will boot up.
2. Panggihan Alat: Use Grandstream's GDS Manager software or a network scanner to discover the GDS3712's IP address on your local network.
3. Aksés Web UI: Buka a web browser and enter the device's IP address. Log in using the default credentials (usually admin/admin).
4. Konpigurasikeun Setélan Jaringan: Set a static IP address, subnet mask, gateway, and DNS server if required by your network.
5. Apdet firmware: Check for and install the latest firmware updates from the Grandstream website for optimal performance and security.

3. Pendaptaran Akun SIP

1. Navigate to the SIP settings in the web UI.
2. Configure the SIP server address, SIP User ID, Authenticate ID, and Password as provided by your SIP service provider or IP PBX administrator.
3. Ensure the SIP status shows "Registered" after applying settings.

Parentah Operasi

1. Nelepon

• Visitor Initiated Call: A visitor presses the single call button on the GDS3712. The device will dial the pre-configured SIP extension(s).
• Receiving Call: The call can be received on a compatible IP phone, video intercom station, or smartphone application.

2. Remote Door Opening

• During an active call, the recipient can enter a DTMF code (e.g., a PIN) on their receiving device to trigger the electric lock relay, opening the door.
• The specific DTMF code is configured in the GDS3712's web panganteur.

3. Pemantauan Video

• The GDS3712's video stream can be accessed via an NVR, compatible IP video phone, or a dedicated surveillance application.
• Refer to your NVR or surveillance software documentation for instructions on adding an IP camera.

4. Alarm Inputs/Outputs

• Input Alarm: Connect an exit button or door sensor to the alarm input ports. These can trigger events such as initiating a call or sending an alert.
• Kaluaran Alarm: The alarm output can be configured to activate external devices (e.g., a siren) based on specific events detected by the GDS3712.

Pangropéa

• beberesih: Periodically clean the camera lens and the device's exterior with a soft, damp lawon. Ulah make bahan kimia kasar atawa cleaners abrasive.
• Pembaruan firmware: Regularly check the Grandstream website for new firmware versions. Keeping the firmware updated ensures optimal performance, security, and access to new features.
• Pamariksaan kabel: Periodically inspect all cables and connections for signs of wear or damage.
• Konfigurasi Nyadangkeun: It is recommended to regularly back up the device's configuration settings through the web panganteur.

Pamérésan masalah

spésifikasi

Garansi sareng Rojongan

For warranty information, please refer to the official Grandstream website or the warranty card included with your product. Technical support can be obtained through Grandstream's official support channels, including their website, knowledge base, and customer service contact information.

Always provide your product model number (GDS3712) and serial number when contacting support.