Andoer D2 Handheld RGB LED Video Light Wand User Manual

Bubuka

Hatur nuhun pikeun meuliasing the Andoer D2 Handheld RGB LED Video Light Wand. This manual provides detailed instructions for the safe and effective use of your new light wand. Please read this manual thoroughly before operation and retain it for future reference.

Émbaran Kasalametan

• Ulah ngalaan alat ka cai atawa kalembaban luhur.
• Hindarkeun paparan panon langsung kana sumber cahaya.
• Ulah ngabongkar atanapi ngarobih alatna. Perbaikan ngan ukur kedah dilakukeun ku jalmi anu diidinan.
• Jauhkeun tina jangkauan barudak.
• Anggo ukur kabel ngecas anu disayogikeun atanapi disertipikasi.
• Ulah dianggo dina lingkungan anu ngandung gas atanapi cairan anu gampang kaduruk.

Eusi pakét

Mangga parios eusi bungkusan nalika dibuka. Upami aya barang anu leungit atanapi ruksak, hubungi padagang anjeun.

• Andoer D2 Handheld RGB LED Video Light Wand
• Kabel Ngecas USB Tipe-C
• Manual pangguna (dokumén ieu)

Produk Leuwihview

Familiarize yourself with the components and controls of the Andoer D2 light wand.

Gambar: Leuwihview of the Andoer D2 light wand, showing its dimensions (approximately 49.5cm / 19.5in long and 3.8cm / 1.5in diameter) and control panel. The control panel includes a Power Indicator Light, Mode Selection button, Power Switch, Brightness + button, Brightness - button, and a Charging Port.

Fungsi Panel Kontrol:

• Saklar kakuatan: Turns the light wand on or off.
• Pilihan Mode: Cycles through different lighting modes (e.g., CCT mode, RGB color effects).
• Caang +: Increases the light brightness.
• Caang -: Decreases the light brightness.
• Lampu Indikator Kakuatan: Shows the power status and charging status.
• Port Ngecas (Tipe-C): Used for charging the internal battery.

Disetél

Muatan Awal:

Before first use, fully charge the light wand. Connect the provided USB Type-C cable to the charging port on the device and the other end to a USB power adapter (not included) or a computer USB port. The power indicator light will show charging status.

Gambar: A nutup-up view of the Type-C charging port, indicating where to connect the charging cable.

Gambar: The Andoer D2 light wand shown alongside its USB Type-C charging cable, illustrating the charging setup.

Pilihan Pasang:

The Andoer D2 light wand can be used handheld for flexible lighting or mounted for stable positioning. It features a standard 1/4-inch screw hole at the bottom.

Gambar: A lengkep view of the 1/4-inch screw hole located at the base of the light wand, demonstrating how it can be attached to a light stand or tripod for stable use. Note that the light stand/tripod is sold separately.

• Paké Handheld: Simply hold the light wand to direct light as needed.
• Tripod/Light Stand Mounting: Screw the 1/4-inch thread at the bottom of the light wand onto a compatible tripod or light stand. Ensure it is securely fastened before use.

Parentah Operasi

Hurungkeun/Pareuman:

Pencét jeung tahan tombol Pindah kakuatan tombol pikeun ngahurungkeun atawa mareuman wand lampu.

Nyaluyukeun Caang:

The light wand offers 12 levels of adjustable brightness. Use the Caang + tombol pikeun ningkatkeun kacaangan sareng Caang- tombol pikeun ngurangan eta.

Gambar: Illustration of the 12 levels of adjustable brightness, demonstrating the range from dim to bright light output.

Nyaluyukeun Suhu Warna (Modeu CCT):

In CCT mode, you can adjust the color temperature between 2500K (warm light), 5500K (neutral/daylight), and 8500K (cold light). Press the Pamilihan Mode button to cycle to CCT mode, then use the Caang + jeung Caang- buttons to adjust the color temperature.

Gambar: Visual representation of the adjustable color temperatures, ranging from warm (2500K) to neutral (5500K) to cool (8500K) light.

Activating Colorful Light Effects (RGB Mode):

The light wand features 7 colorful light effects: red, green, blue, orange, purple, light blue, and red & blue flash. Press the Pamilihan Mode button to cycle through these RGB effects. Brightness can still be adjusted in these modes using the Caang + jeung Caang- kancing.

Gambar: A visual guide to the 7 colorful light effects available, showcasing the vibrant range of colors the light wand can produce.

Ngecas

The Andoer D2 light wand has a built-in 2600mAh rechargeable lithium battery. When the battery is low, the power indicator light will signal. To charge:

1. Connect the small end of the USB Type-C charging cable to the charging port on the light wand.
2. Connect the standard USB end of the cable to a USB power source (e.g., wall adapter, power bank, computer USB port).
3. The power indicator light will illuminate or change color to indicate charging. It will change again or turn off when fully charged.

A full charge provides approximately 2.5 hours of continuous use at maximum brightness.

Pangropéa

• Clean the light wand with a soft, dry cloth. Do not use abrasive cleaners or solvents.
• Simpen alat dina tempat anu tiis sareng garing jauh tina sinar panonpoé langsung sareng suhu anu ekstrim.
• If not used for extended periods, charge the battery every 3 months to maintain battery health.

Pamérésan masalah

spésifikasi

Garansi sareng Rojongan

Andoer products are designed and manufactured to the highest quality standards. For warranty information or technical support, please refer to the warranty card included with your purchase or visit the official Andoer websitus. Punten tahan bukti pameseran anjeun pikeun klaim garansi.

Andoer Official Websitus: Andoer Store on Amazon