eufy by Anker RoboVac Robot Vacuum G30 Edge Instruction Manual

Bubuka

Welcome to your new eufy by Anker RoboVac G30 Edge. This robot vacuum is designed to provide efficient and intelligent cleaning for your home with Smart Dynamic Navigation. Please read this manual carefully to ensure proper setup, operation, and maintenance of your device.

Naon dina Box

The eufy RoboVac G30 Edge package includes the following items:

• eufy RoboVac G30 Edge Robot Vacuum
• Charging Base with integrated cable management
• Adaptor kakuatan
• Side Brushes (extra set)
• High-Performance Filter (extra)
• Alat beberesih
• Boundary Strips (2 rolls)
• Kabel Dasi
• Gancang Mimitian Guide
• Manual pamaké

Image: All components included in the eufy RoboVac G30 Edge packaging.

Disetél

Léngkah Setup Awal

1. Prepare the Charging Base: Place the charging base against a wall in an open, uncluttered area. Ensure there is at least 3 feet (1 meter) of clear space in front of the base and 1.5 feet (0.5 meters) on either side. Connect the power adapter to the charging base and a wall outlet.
2. Pasang Sikat Sisi: Press the side brushes onto the posts at the bottom of the RoboVac until they click into place.
3. Charge the RoboVac: Place the RoboVac on the charging base. The indicator lights will show charging status. Ensure it is fully charged before first use.
4. Download the eufyHome App: Milarian pikeun "eufyHome" in the App Store (iOS) or Google Play (Android) and download the app.
5. Nyambung ka Wi-Fi: The RoboVac requires a 2.4 GHz Wi-Fi network. Ensure your mobile device is connected to a 2.4 GHz network during setup. Follow the in-app instructions to connect your RoboVac to your home Wi-Fi.

Parentah Operasi

The eufy RoboVac G30 Edge offers various cleaning modes and smart features for optimal cleaning.

Control Buttons on RoboVac

• Tombol Mimitian/Reureuh: Pencét pikeun ngamimitian atanapi ngareureuhkeun beberesih.
• Tombol imah: Press to send the RoboVac back to the charging base.
• Tombol beberesih titik: Press to initiate spot cleaning for a concentrated area.

eufyHome App Controls

The eufyHome app provides comprehensive control over your RoboVac:

• Mimitian/Eureunkeun beberesih: Mimitian atanapi eureunkeun siklus beberesih.
• Select Cleaning Modes: Choose from various modes like Auto, Spot, Edge, or Manual cleaning.
• Setel Jadwal: Program cleaning times for automatic operation.
• View Riwayat bersihan: Review past cleaning sessions and coverage maps.
• Saluyukeun Daya Nyeuseup: Customize suction levels for different floor types.
• Nampi Bewara: Get alerts on RoboVac status and maintenance reminders.

Image: The eufyHome app interface, allowing control and monitoring of the RoboVac.

Pangropéa

To ensure optimal performance and longevity of your RoboVac, regular maintenance is essential. Perform these steps as needed or as indicated by the app.

Koléktor lebu sareng Saringan

1. Empty the Dust Collector: Press the release button to remove the dust collector. Open the dust collector cover and empty its contents into a trash bin.
2. Ngabersihan saringan: Remove the high-performance filter and foam filter. Tap them gently to remove dust. Use the cleaning tool to brush off any remaining debris. Do not wash the high-performance filter with water.
3. Pasang deui: Place the filters back into the dust collector and reinsert the dust collector into the RoboVac.

Sikat samping

Check the side brushes regularly for tangled hair or debris. Pull them off to clean and reattach. Replace if worn or damaged.

Ngagulung Sikat

Remove the rolling brush cover and lift out the rolling brush. Use the cleaning tool to cut and remove any hair or debris wrapped around the brush. Reinstall the rolling brush and cover.

Sénsor jeung Ngecas Pin

Wipe the drop sensors, charging contact pins on the RoboVac, and charging base pins with a dry cloth to maintain good contact and prevent malfunctions.

Pamérésan masalah

If you encounter issues with your RoboVac, refer to the following common problems and solutions:

RoboVac henteu hurung atanapi ngecas.

• Ensure the power adapter is securely connected to the charging base and a functional wall outlet.
• Check if the charging pins on the RoboVac and charging base are clean and making proper contact.
• Verify the main power switch on the side of the RoboVac is in the "ON" position.

RoboVac sering macét.

• Use the provided boundary strips to block off areas where the RoboVac might get stuck (e.g., very thick carpets, areas with many loose cables).
• Clear wires, cables, and small objects from the floor before cleaning.
• Ensure the drop sensors are clean and free of debris.

Teu bisa nyambung ka Wi-Fi.

• Confirm your Wi-Fi network is 2.4 GHz. The RoboVac does not support 5 GHz networks.
• Ensure your mobile device is connected to the 2.4 GHz network during the setup process.
• Restart your Wi-Fi router and try connecting again.
• Move the RoboVac closer to your Wi-Fi router to improve signal strength.

Spésifikasi produk

Garansi sarta Rojongan Palanggan

For warranty information, technical support, or other inquiries, please refer to the official eufy websitus atanapi ngahubungan layanan palanggan maranéhna. Simpen resi pameseran anjeun pikeun klaim jaminan.

Official eufy Websitus: www.eufylife.com