SCULPFUN S30 Laser Engraver Instruction Manual

1. Bubuka

The SCULPFUN S30 is a 5W diode laser engraver and cutter designed for precision work on a variety of materials. It features an automatic air assist system, an industrial-grade X-axis guide rail, and a robust frame, making it suitable for both engraving and cutting tasks. This manual provides essential information for the safe and effective operation of your SCULPFUN S30.

Figure 1.1: SCULPFUN S30 Laser Engraver with examples of engraved and cut materials.

2. Pedoman Kasalametan

Operating a laser engraver involves inherent risks. Adhere strictly to the following safety precautions to prevent injury or damage.

• Perlindungan panon: Always wear the provided laser protective eyewear when the machine is in operation. The laser is Class IV and can cause severe eye damage.
• Operasi anu teu diurus: Do not leave the machine running unattended. Constant supervision is required during operation.
• Ventilasi: Ngoperasikeun mesin di wewengkon well-ventilated pikeun dissipate haseup jeung haseup dihasilkeun salila ukiran sarta motong.
• Kasalametan Bahan: Only engrave or cut materials specified as safe. Avoid materials that produce toxic fumes or are highly flammable.
• Stopan Darurat: Biasakeun diri anjeun sareng lokasi sareng operasi tombol eureun darurat.
• Barudak jeung Pets: Jauhkeun barudak jeung piaraan ti wewengkon operasi.

Figure 2.1: The limit switch mechanism, featuring a caution label advising against unattended operation.

3. Fitur Produk

The SCULPFUN S30 incorporates several advanced features for enhanced performance and user experience:

• Automatic Air Assist System: Equipped with a 32-bit automatic air assist motherboard and an air pump, intelligently controlled via LightBurn software (M8 button). This system significantly improves cutting efficiency and cleanliness by blowing away debris.
• High-Pressure Air-Assisted Nozzle: Generates a high-pressure airflow of 30L/min, accelerating cutting speed by over 5 times compared to operations without air assist. Ensures clean cut surfaces.
• Industrial X-Axis Guide Rail: Features a precision industrial-grade X-axis guide rail, ensuring stable and accurate engraving and cutting without ripple patterns, even on small details.
• Sturdy and Durable Frame: Constructed from high-strength aluminum alloy, the frame can withstand up to 50KG of weight, ensuring long-term durability and precision. The modular design allows for future laser upgrades.
• Kasaluyuan bahan serbaguna: Capable of engraving wood, MDF, zigzag, cardboard, plastic, rust, circuit board, aluminum oxide, 304 stainless steel, ceramics, and dark stone. It can cut black acrylic sheet, cardboard, non-woven fabric, bamboo sheet, leather, and certain plastic panels.

Figure 3.1: The automatic air pump, a key component for efficient cutting and engraving.

Figure 3.2: Visual comparison demonstrating the benefits of automatic air assist for clean edges and cuts.

4. Eusi Paket

Pastikeun yén sadaya komponén anu didaptarkeun di handap aya dina pakét anjeun:

• SCULPFUN S30 Laser Engraver Frame Components
• Modul Laser (5W)
• Automatic Air Assist Pump
• Air Nozzle and Tubing
• 32-bit Air Assist Mainboard
• Limit Switches (X and Y axis)
• Adaptor Daya sareng Kabel
• Kabel USB
• Laser Protective Eyewear
• Fixed Focus Column
• Sample Materials for Testing
• Alat pikeun Majelis
• Manual pangguna (dokumén ieu)

Gambar 4.1: Leuwihview of all components included in the SCULPFUN S30 package.

5. Parentah Majelis

Follow these steps to assemble your SCULPFUN S30 laser engraver. Refer to the detailed assembly guide provided in the box for visual instructions.

1. Ngabongkar komponén: Cabut sadaya bagian tina bungkusna kalayan ati-ati teras pariksa kana daptar eusi bungkusna.
2. Kumpulkeun pigura: Connect the aluminum alloy frame components according to the diagrams in the separate assembly guide. Ensure all screws are tightened securely.
3. Install X-Axis Guide Rail: Mount the X-axis guide rail onto the frame, ensuring smooth movement.
4. Attach Laser Module: Secure the laser module to the gantry. Connect the necessary cables.
5. Install Air Assist System: Connect the air pump to the air nozzle and route the tubing. Ensure the nozzle is correctly positioned near the laser output.
6. Mount Limit Switches: Install the X and Y axis limit switches. These are crucial for homing and precise positioning. Users can choose to install or not install them based on their needs, but installation is recommended for repeated positioning accuracy.
7. Connect Mainboard: Connect all motor, laser, and limit switch cables to the 32-bit air assist mainboard.
8. Sambungan Daya: Sambungkeun adaptor daya kana mesin teras ka stop kontak.

6. Instalasi jeung Sambungan Software

The SCULPFUN S30 supports various operating software. LightBurn is recommended for full functionality, especially for automatic air assist control.

• Parangkat Lunak anu Dirojong: LightBurn (recommended for M8 air assist control), LaserGRBL, Benbox, GrblController, LiteFire.
• Sistem Operasi: Supports Windows and MAC systems.
• File Bentuk: Compatible with NC, BMP, JPG, PNG, DXF, and other image formats.

6.1. Pamasangan parangkat lunak

1. Unduh parangkat lunak: Obtain the latest version of LightBurn or LaserGRBL from their official websitus.
2. Pasang Supir: Follow the software's instructions to install any necessary drivers for your operating system.
3. Ngajalankeun Software: Open the installed software.

6.2. Connecting the Engraver

1. Daya Hurung: Ensure the engraver is powered on.
2. Nyambungkeun USB: Connect the engraver to your computer using the provided USB cable.
3. Pamilihan Palabuhan: In the software, select the correct COM port for your engraver.
4. Setup Awal: Follow any on-screen prompts within the software for initial device setup and configuration.

Figure 6.1: The 32-bit air assist mainboard, supporting automatic air assist control and future wireless upgrades.

7. Operasi dasar

This section outlines the fundamental steps for engraving and cutting.

7.1. Material Placement

Place the material to be engraved or cut flat on the working surface. Ensure it is stable and does not move during operation.

7.2. Ngafokuskeun Laser

The S30 uses a fixed focus column and sliding device for focusing. Position the laser module over the material and adjust its height until the laser beam is at its smallest point on the material surface. This ensures optimal engraving and cutting performance.

Figure 7.1: Illustration of the 0.06 x 0.06 mm laser focus and beam shaping technology.

7.3. Preparing Your Design

Import your design into the software (e.g., LightBurn). Adjust parameters such as power, speed, and number of passes according to the material type and desired outcome. For automatic air assist, ensure the M8 command is enabled in LightBurn for cutting operations.

7.4. Ngamimitian Operasi

Once the design is prepared and the laser is focused, initiate the engraving or cutting process from the software. Monitor the machine closely throughout the operation.

8. Pangropéa

Regular maintenance ensures the longevity and optimal performance of your SCULPFUN S30.

• Lensa Laser Bersih: Periodically clean the laser lens with a soft, lint-free cloth and lens cleaning solution to maintain beam quality.
• Puing jelas: Remove any accumulated dust, debris, or material residue from the machine's frame, rails, and working area after each use.
• Lubricate Rails: Apply a small amount of lubricant to the X and Y axis guide rails periodically to ensure smooth movement.
• Pariksa sambungan: Ensure all electrical and air assist connections are secure and free from damage.
• Air Pump Filter: If applicable, check and clean or replace the air pump filter to maintain optimal airflow.

9. Cara ngungkulan

Bagian ieu ngabahas masalah umum anu anjeun tingali.

10. Spésifikasi Téknis

11. Garansi jeung Rojongan

For warranty information and technical support, please refer to the documentation included with your product or visit the official SCULPFUN websitus. Simpen resi pameseran anjeun salaku bukti pameseran pikeun klaim garansi.