Philips Series 9000 Electric Shaver S9696/50 Manual Pamaké

1. Bubuka

Welcome to the Philips Series 9000 Electric Shaver S9696/50. This manual provides essential information for the safe and effective use, maintenance, and care of your new shaver. Please read these instructions thoroughly before first use and keep them for future reference.

Image 1.1: The Philips Series 9000 Electric Shaver S9696/50.

2. Émbaran Kasalametan

Pikeun mastikeun operasi anu aman, salawasna perhatoskeun tindakan pencegahan ieu:

• Always unplug the shaver before cleaning or if not in use.
• Keep the shaver away from water when plugged in. This appliance is designed for wet and dry use, but the charging adapter must remain dry.
• Do not use the shaver if it is damaged.
• Clean the shaver thoroughly after each use and dry it completely to prevent bacterial growth.
• Exercise caution when shaving, as skin irritation may occur, especially during initial uses.
• Alat ieu henteu dimaksudkeun pikeun dianggo ku jalma anu kakurangan kamampuan fisik, indrawi atanapi mental, atanapi kirang pangalaman sareng pangaweruh, kecuali aranjeunna dipasihan pangawasan atanapi petunjuk ngeunaan panggunaan alat ku jalma anu tanggung jawab kasalametanana.

3. Eusi Paket

Your Philips Series 9000 Electric Shaver S9696/50 package includes the following items:

• Philips Series 9000 Shaver Body
• Gancang Bersih Pod
• Gancang Beresih Pod Cartridge
• Panyimpenan Case
• Kabel Ngecas
• USB Ngecas Adaptor
• Sikat beberesih

Image 3.1: All items included in the Philips Series 9000 Shaver package.

4. Setélan

4.1 Ngecas Cukur

1. Connect the charging cable to the shaver and the USB charging adapter.
2. Colokkeun adaptor kana stop kontak témbok.
3. The battery indicator on the shaver will show charging progress. A full charge typically takes approximately 1 hour and provides up to 60 minutes of shaving time.

4.2 Initial Cleaning (Quick Clean Pod)

For optimal hygiene and performance, it is recommended to clean the shaver using the Quick Clean Pod before first use or after several shaves.

1. Open the Quick Clean Pod and insert a fresh Quick Clean Pod Cartridge.
2. Teundeun sirah-handap cukur kana Quick Clean Pod.
3. The cleaning cycle will start automatically, powered by the shaver's battery. The cleaning process takes approximately 1 minute.
4. Saatos beberesih, cabut cukur sareng ngantepkeun hawa garing.

Image 4.1: The Philips Shaver placed in the Quick Clean Pod for cleaning.

5. Parentah Operasi

5.1 Téhnik Nyukur

The Philips Series 9000 Shaver is designed for both wet and dry shaving. For best results, ensure your skin is clean before shaving.

• Cukur garing: For a quick and convenient shave, use the shaver on dry skin.
• Cukur baseuh: For a more comfortable shave, use with shaving foam or gel. This can help reduce skin irritation.

Move the shaver in small, circular motions over your face, applying gentle pressure. The 360-D Flexhead adapts to the contours of your face, ensuring maximum skin contact and reducing missed hairs.

Image 5.1: The 360-D Flexhead design, which conforms to facial contours.

5.2 Téhnologi SkinIQ

The shaver features SkinIQ Téhnologi, which senses your beard density 125 times per second and automatically adjusts the motor power to match the thickness of your whiskers. This ensures an efficient and comfortable shave, even in dense areas.

Image 5.2: Diagram illustrating the SkinIQ Technology sensing beard density.

5.3 Super Lift & Cut Technology

Dilengkepan Super Lift & Cut Technology, the shaver's 72 self-sharpening blades work in two stages: the first blade lifts the hair, and the second blade cuts it below skin level for a close and smooth shave. The micro-bead coating on the shaving head reduces friction by 25% compared to non-coated materials, minimizing skin irritation.

Gambar 5.3: Deukeut view of the shaver blades, highlighting the Super Lift & Cut mechanism.

Image 5.4: Illustration of the micro-bead coating for reduced skin friction.

6. Pangropéa

6.1 beberesih poean

After each shave, rinse the shaver head under warm running water. For a more thorough clean, detach the shaving head and rinse both the head and the shaver body. Allow all parts to air dry completely before reassembling.

6.2 Quick Clean Pod Cleaning

For a deeper clean and lubrication, use the Quick Clean Pod regularly (e.g., once a week or as needed). Follow the steps outlined in Section 4.2. Replace the Quick Clean Pod Cartridge when indicated or after approximately 30 cleaning cycles.

6.3 Ngaganti sirah cukur

For optimal performance, it is recommended to replace the shaving heads every 12 months. Replacement heads can be purchased from authorized Philips retailers or online.

7. Cara ngungkulan

• Alat cukur henteu hurung: Ensure the shaver is fully charged. If the issue persists, try a different power outlet or charging cable.
• Kinerja cukur anu goréng: Ngabersihan sirah cukur tuntas. Upami kinerja henteu ningkat, sirah cukur kedah diganti.
• Iritasi kulit: Ensure you are using proper shaving technique (gentle circular motions). Consider wet shaving with foam or gel. If irritation persists, consult a dermatologist.
• Quick Clean Pod not working: Ensure the shaver is correctly placed in the pod and the cartridge is properly inserted. Check if the shaver has sufficient battery charge.

8. Spésifikasi

9. Garansi jeung Rojongan

This Philips product comes with a standard manufacturer's warranty. Please refer to the warranty card included in your package for specific terms and conditions, or visit the official Philips website for detailed warranty information and product registration.

For technical support, replacement parts, or further assistance, please visit the Philips support websitus atanapi ngahubungan layanan palanggan maranéhna. Anjeun tiasa mendakan inpormasi kontak dina Philips websitus atawa dina dokuméntasi disadiakeun kalawan produk Anjeun.

Dukungan Online: www.philips.com/support