1. Émbaran Kasalametan
This LASER TREE module is a Class 4 laser product. Improper use can result in serious injury, including eye damage, skin burns, and fire. Always adhere to the following safety guidelines:
- Perlindungan panon: Always wear appropriate laser safety goggles (OD 6+ for 450nm blue laser) when operating the laser module. Never look directly into the laser beam or at reflections.
- Perlindungan Kulit: Hindarkeun paparan langsung kulit kana sinar laser.
- Bahaya seuneu: The laser can ignite flammable materials. Ensure a fire extinguisher is readily available and never leave the laser operating unattended.
- Ventilasi: Operate the laser in a well-ventilated area to dissipate fumes and smoke generated during engraving or cutting.
- Barudak jeung Pets: Jauhkeun barudak jeung piaraan ti wewengkon operasi.
- Stopan Darurat: Familiarize yourself with the emergency stop procedure for your laser engraving machine.
- Pamasangan anu leres: Ensure the module is securely mounted and all electrical connections are correct before operation.
2. Introduction to the LT-80W-AA Pro 12V Laser Module
The LASER TREE LT-80W-AA Pro 12V is a high-performance diode laser engraving and cutting module designed for various DIY and professional applications. Featuring 10000mW (10W) optical output power and a built-in FAC (Fast Axis Collimation) lens, it delivers a compressed spot for enhanced precision and cutting ability. The integrated air assist system further improves cutting performance and reduces charring.
This module is compatible with a wide range of laser engraving machines, CNC routers, and 3D printers, offering a significant upgrade for users seeking increased power and efficiency.
Gambar: Examples of engraving and cutting applications possible with the laser module.
3. Eusi Paket
Pastikeun yén sadaya komponén anu didaptarkeun di handap kalebet kana pakét anjeun:
- 1x LASER TREE LT-80W-AA Pro Laser Module
- 1x Driver Adapter Board (P-DA-01)
- 1x Eye Protection Cover (Magnetic, removable)
- 1x Spare Protective Window Glass (Φ13*1.1mm)
- 1x 3-Pin Input Cable
- 1x L-Wrench
- 3x Focus Fixing Plates
- 1x Sliding Plate for mounting
- Accessories for Sliding Plate (screws)
Image: All components included in the LT-80W-AA Pro 12V kit.
4. Setup jeung Instalasi
4.1 Cék kasaluyuan
Before installation, ensure your machine's control board voltage (DC 12V or 24V) matches the laser module's requirement. The included driver adapter board can assist with compatibility for different voltages and pin configurations.
Image: Compatibility chart for various laser engraving machines.
4.2 Mounting the Laser Module
- Attach the sliding plate to your machine's carriage using the provided screws. The module features multi-hole positions for broad compatibility.
- Secure the laser module to the sliding plate.
- Ensure the module is firmly attached and stable.
4.3 Sambungan Listrik
Connect the 3-pin input cable from the laser module to your machine's control board. If your machine's voltage or pinout is incompatible, use the provided driver adapter board:
- Connect the laser module to the adapter board.
- Connect the adapter board to your machine's control board.
- Ensure the power switch on the adapter board is set correctly for external or internal power supply.
Image: Driver Adapter Board (P-DA-01) connections.
4.4 Air Assist System Connection
The module features a 6mm diameter bending air metal nozzle. Connect an external air pump (not included) to this nozzle using an air tube with an outer diameter of 6mm and an inner diameter of ≥4mm. The air assist system helps achieve cleaner cuts and reduces charring.
Image: Air tube holder and electrical connection details.
5. Operasi
5.1 Initial Power-On and Safety
After installation, ensure all safety precautions are in place, especially wearing laser safety goggles. Power on your laser engraving machine.
5.2 Pokus
The LT-80W-AA Pro module is designed with a fixed focus. Use the provided focus fixing plates to set the optimal working distance between the laser module and the material surface. Typically, the focus length is 45mm for optimal performance in both engraving and cutting.
5.3 Engraving and Cutting Capabilities
This module offers significant power for various materials:
- Ukiran: Directly engrave mirror stainless steel without needing to paint it black. Engraving speed on 304 stainless steel can reach up to 300mm/s. It can also engrave smooth stainless steel metal and ceramics.
- motong: Capable of cutting through 8mm thickness plywood in a single pass at 1.5mm/s. It can also cut 5mm acrylic and 15mm pinewood in a single pass.
Image: Cutting performance on various materials.
5.4 Air Assist Benefits
Activating the air assist system during cutting and engraving significantly improves results by:
- Reducing charring and burn marks on the material.
- Clearing smoke and debris from the laser's path, leading to cleaner cuts.
- Enhancing cutting speed and depth.
Image: Visual comparison of results with and without air assist.
5.5 FAC Technology
The built-in FAC (Fast Axis Collimation) lens compresses the laser beam, making the spot size much smaller at focus. This technology increases power density by 4-5 times, resulting in superior cutting penetration, precision, and engraving speed.
Image: Explanation of Dual-LDs with beam compressed technology.
6. Pangropéa
6.1 Cleaning the Protective Lens
Over time, dust and debris can accumulate on the protective lens, affecting laser performance. Regularly inspect and clean the lens. A spare protective window glass is included for replacement if necessary.
- Pastikeun modul laser pareum sareng parantos tiis.
- Carefully unscrew the protective lens cap.
- Gently clean the lens with a lint-free cloth and lens cleaning solution, or replace it with the spare lens.
- Reattach the protective lens cap securely.
Image: Steps for replacing the protective lens.
6.2 beberesih umum
Keep the exterior of the laser module clean and free from dust and debris to ensure proper heat dissipation and longevity.
7. Cara ngungkulan
If you encounter issues with your LASER TREE module, consider the following common problems and solutions:
| Masalah | Mungkin Cukang lantaranana | Solusi |
|---|---|---|
| Laser teu némbak | Loose connection, incorrect voltage, software issue, damaged cable | Check all electrical connections. Verify correct voltage (12V) and pinout. Ensure software settings are correct. Inspect cables for damage. |
| Weak laser output / Poor engraving/cutting | Incorrect focus, dirty lens, insufficient power settings, material issues | Re-check focus using fixing plates. Clean or replace the protective lens. Adjust laser power and speed settings in your software. Ensure material is suitable for laser processing. |
| Excessive charring / Burn marks | No air assist, incorrect speed/power, material type | Ensure air assist is connected and active. Adjust laser speed and power settings. Consider material properties and test on scrap pieces. |
| Overheating modul | Poor ventilation, prolonged high power use, fan obstruction | Ensure adequate ventilation around the module. Avoid continuous operation at maximum power for extended periods. Check if the fan is clean and unobstructed. |
If you cannot resolve the issue using the table above, please contact LASER TREE technical support.
8. Spésifikasi Téknis
- merek: Tangkal laser
- model: LT-80W-AA Pro 12V
- Daya Kaluaran optik: 10000mW (10W)
- Daya Mesin: 80W
- Kelas laser: Kelas 4
- Bahan: Aluminium, Plastik
- Ukuran produk: 4.29 "L x 1.57" W
- Beurat barang: 450 Gram (kira-kira 15.9 ons)
- Modeu operasi: Manual
- Diode Lifetime: Kurang leuwih 20,000 jam
- Fitur: Built-in FAC, Air Assist System, Magnetic Removable Eye Cover, Fan Protection, Air Tube Holder
9. Rojongan & Garansi
9.1 Rojongan Téknis
For technical assistance, installation guidance, or operational queries, please visit the LASER TREE official website or contact their customer support directly. Professional technical support is available to assist you.
9.2 Émbaran jaminan
LASER TREE products typically come with a manufacturer's warranty covering defects in materials and workmanship. Please refer to the warranty card included with your product or the official LASER TREE website for specific warranty terms, duration, and claim procedures. Keep your purchase receipt as proof of purchase.
