1. Bubuka
This manual provides detailed instructions for the installation, operation, and maintenance of your KICKER 6.5 inch CS Series speaker upgrade kit, specifically designed for Ford Focus models from 2012 to 2018. This kit includes two pairs of KICKER 6.5 inch speakers, along with car-specific speaker harnesses and mounting adapters for a seamless upgrade.
2. Eusi Paket
Punten parios yén sadaya komponén anu didaptarkeun di handap kalebet kana pakét anjeun:
- 2 Pairs of KICKER 46CSC654 6.5 inch CS Series 2-Way Coaxial Car Speakers
- 2 Pairs of Vixen Go VGH-72-5602 Speaker Harnesses
- 2 Pairs of Vixen Go VGB6502 Speaker Mounting Adapters (for Ford Focus 2012-2018)
Gambar 2.1: Leuwihview of the KICKER speaker upgrade kit components.
3. Spésifikasi
| Fitur | Spésifikasi |
|---|---|
| Tipe Speaker | 6.5 inch CS Series 2-Way Coaxial |
| Daya Puncak | 300 Watt (per pasangan) |
| Kakuatan RMS | 100 Watt (per pasangan) |
| Impedansi | 4 ohm |
| Sensitipitas | 90 dB |
| Réspon Frékuénsi | 40-20,000 Hz |
| Jero Pasang Luhur | 1-11 / 16 inci |
| Woofer Features | EVC™ (Extended Voice Coil) tech, UV-treated poly-foam surround, large woofer magnet |
| Tweeter Features | Zero-protrusion, PEI-tweeter construction, Neodymium magnets |
| Included Grilles | Steel mesh grilles for speaker protection |
Gambar 3.1: Detil view of a KICKER CS Series speaker.
Gambar 3.2: Sisi profile of the KICKER CS Series speaker, showing its shallow mounting depth.
4. Setup jeung Instalasi
The KICKER speaker upgrade kit is designed for straightforward installation in your Ford Focus (2012-2018) without the need for cutting factory wires. Follow these steps for proper installation:
4.1. Important Disclaimer
Image 4.1: OEM Speaker Kit Disclaimer regarding vehicle compatibility.
Catetan: Vehicle specifications can differ due to specific trims or premium audio systems. Always check your specific vehicle to ensure fit. Consult a professional installer if unsure, to prevent interference with windows or other OEM parts. Retain all factory screws and fasteners as they may be needed.
4.2. Visual Installation Guide
For a comprehensive visual guide on installing aftermarket speakers, brackets, and wire harnesses, please refer to the video below:
Video 4.2: Aftermarket speaker, bracket, and wire harness installation guide by HookedOnTronics (Authorized Dealer).
4.3. Speaker and Adapter Assembly
- Identify the car-specific mounting bracket (speaker adapter) provided in the kit. Unlike some installations, the speaker will be mounted from behind the adapter.
- Align the holes on the KICKER speaker with the holes on the mounting adapter. Ensure they line up perfectly.
- Use the screws provided with your KICKER speakers to secure the speaker to the adapter. If the provided screws are not the correct size for your specific application, you may need to use smaller or larger screws, or washers for a tighter fit.
Image 4.3: Speaker mounting adapters included in the kit.
4.4. Wiring Harness Connection
- Locate the car-specific wiring harnesses (Vixen Go VGH-72-5602) included in your kit. These harnesses are designed to connect directly to your vehicle's factory speaker connector, eliminating the need for cutting or splicing wires.
- Connect the wires from the KICKER speaker to the appropriate terminals on the back of the speaker. Ensure a secure connection.
- Plug the car-specific wiring harness into the corresponding connector on the back of the assembled speaker and adapter unit.
- Connect the other end of the car-specific wiring harness directly to your vehicle's factory speaker wiring. This provides a plug-and-play installation.
Image 4.4: Speaker wiring harnesses for direct connection.
5. Parentah Operasi
Once installed, your KICKER CS Series speakers will operate with your vehicle's existing audio system. No special operating procedures are required beyond the normal use of your car stereo. Ensure your head unit's volume is adjusted appropriately to prevent distortion and potential damage to the speakers.
6. Pangropéa
KICKER CS Series speakers are designed for durability and require minimal maintenance. Follow these general guidelines:
- beberesih: Anggo kaén anu lembut sareng garing pikeun ngusap grilles spiker sareng sakurilingna. Hindarkeun ngagunakeun bahan kimia anu kasar atanapi pembersih abrasive.
- Perlindungan: The UV-treated poly-foam surround resists heat and direct sunlight, but prolonged exposure to extreme conditions should be minimized.
- Pamariksaan: Periodically check the speaker connections and mounting for any looseness or signs of wear.
7. Cara ngungkulan
If you encounter issues with your KICKER speakers, consider the following common troubleshooting steps:
- Henteu aya sora:
- Check all wiring connections at the speaker and the vehicle's factory harness. Ensure they are secure.
- Verify that your car stereo is powered on and functioning correctly.
- Check the balance and fader settings on your stereo to ensure sound is directed to all speakers.
- Sora distort:
- Reduce the volume level on your car stereo.
- Pariksa sambungan anu kendor atanapi kabel speaker anu rusak.
- Ensure the speakers are securely mounted and not vibrating against the door panel or other surfaces.
- Sora Intermittent:
- Inspect all wiring for any breaks, pinches, or corrosion.
- Ensure the speaker harnesses are fully seated in their connectors.
If problems persist after attempting these steps, it is recommended to consult a professional car audio technician.
8. Garansi jeung Rojongan
KICKER products are manufactured to high standards. For specific warranty information and terms, please refer to the documentation provided with your original purchase or visit the official KICKER website. For technical support or service inquiries, please contact KICKER customer service directly.
