Bohlam Lampu Pinter Linkind Matter A19 E26, 60W 800LM, 2 Pak Buku Panduan Pangguna

1. Bubuka

This manual provides essential information for the safe and efficient use of your Linkind Matter Smart Light Bulb. Please read it thoroughly before installation and operation. This smart bulb offers multi-color and tunable white lighting, voice control, app control, DIY modes, timers, music sync, and group control. It is designed for seamless integration into various smart home ecosystems.

2. Émbaran Kasalametan

• Do not use with traditional dimmer switches. This may cause flickering or buzzing.
• Pastikeun listrikna pareum sateuacan masang atanapi nyabut bohlam.
• Pikeun pamakéan indoor wungkul.
• Ngan ngarojong jaringan Wi-Fi 2.4GHz.
• Jauhkeun tina jangkauan barudak.
• Avoid exposing the bulb to direct water or excessive moisture.

3. Eusi Paket

• 2 x Linkind Smart Light Bulbs (A19 E26)
• 1 x Manual Instruksi

4. Produk Langkungview

The Linkind Matter Smart Light Bulb is a versatile LED bulb designed for modern smart homes. It features multi-color (RGTBW) and tunable white (1800K-6500K) capabilities, providing 800 lumens of brightness at 9 watts, equivalent to a 60W incandescent bulb. It boasts a high Color Rendering Index (CRI) of 90.00 for accurate color reproduction and a low blue-ray hazard design for eye comfort. The bulb connects via 2.4GHz Wi-Fi and is compatible with Matter-certified platforms like Apple Home, Alexa, Google Home, and SmartThings, as well as the AiDot app.

5. Setélan

5.1 Pra-sarat

• A stable 2.4 GHz Wi-Fi network (5 GHz is not supported).
• A Matter-certified hub/controller (e.g., HomePod, Echo, Nest, SmartThings Hub) is required to control the bulb with Apple Home, Alexa, Google Home, or SmartThings platforms.
• Alternatively, the AiDot app can control the bulb directly without a separate hub.
• Ensure your mobile phone's Bluetooth is enabled during network configuration.
• Complete network configuration within 15 minutes after powering on the device. If not completed, reboot the device and try again.

5.2 Pamasangan

1. Screw the Linkind Smart Light Bulb into a standard E26 light socket.
2. Hurungkeun kakuatan ka fixture lampu. Bohlamna kedah hurung.

5.3 Pairing with a Smart Home Platform (Matter-enabled)

To pair your Linkind Smart Light Bulb with a Matter-compatible platform (Apple Home, Alexa, Google Home, SmartThings), follow these general steps:

1. Ngajalankeun App: Open your preferred smart home app (Apple Home, Alexa, Google Home, or SmartThings).
2. Aktipkeun Bluetooth & Wi-Fi: Ensure your mobile device has Bluetooth enabled and is connected to a 2.4GHz Wi-Fi network.
3. Tambahkeun Alat: Look for an 'Add Device' or '+' icon within the app.
4. Scan Matter Code: The app will prompt you to scan the Matter QR code located on the bulb itself or its packaging.
5. Turutan parentah dina layar: Complete the pairing process by following any additional prompts in the app, such as assigning the bulb to a room or giving it a name.

6. Parentah Operasi

6.1 Basic Control (App & Voice)

Once paired, you can control your smart bulb using the AiDot app or your connected smart home platform's app (Apple Home, Alexa, Google Home, SmartThings) and voice commands.

• Hurung/Pareuman: Toggle the light on or off.
• Caang: Atur inténsitas cahaya ti 1% dugi ka 100%.
• Robah Warna: Select from millions of colors or choose tunable white light (1800K-6500K).

6.2 Fitur canggih

• Singkronisasi Musik: The bulb can change colors and brightness in rhythm with music detected by your phone's microphone.
• Modeu hudang: Set schedules for the light bulb to gradually change colors over 24 hours, simulating natural sunlight from dusk to dawn.
• Kontrol Grup: Easily group multiple Linkind smart bulbs to control them simultaneously with a single command.
• DIY Color & Scene: Create custom color combinations and dynamic lighting scenes for various moods and occasions (e.g., reading, party, relaxing).

7. Pangropéa

• Clean the bulb with a soft, dry cloth. Do not use liquid cleaners.
• Store the bulb in a cool, dry place when not in use for extended periods.

8. Cara ngungkulan

• Bulb not connecting: Ensure your Wi-Fi is 2.4GHz. Check if Bluetooth is enabled on your phone. Reboot the bulb and try pairing again within 15 minutes of power-on.
• Kedip-kedip atanapi buzzing: Do not use the smart bulb with traditional dimmer switches. Ensure the bulb is securely screwed into the socket.
• Kaleungitan kontrol: Check your Wi-Fi connection. Ensure the AiDot app and your Matter-compatible hub are updated to the latest versions.
• Color or brightness issues: Reset the bulb by turning it off and on five times consecutively. This will put it into pairing mode.
• For further assistance, refer to the 'Feedback' section within the AiDot app.

9. Spésifikasi

10. Garansi jeung Rojongan

Linkind provides a garansi 2 taun for this product. For technical support or customer service inquiries, please contact Linkind customer service. Live customer service is available Monday-Friday, 9 AM - 5 PM PST.

You can also find support and provide feedback directly through the AiDot app.