1. Produk Langkungview
The AOPUTTRIVER AP-6000GH is a high-precision HVAC anemometer designed for measuring wind speed, wind temperature, and air volume. Featuring a waterproof touch-screen, rechargeable battery, and various measurement units, it is suitable for a wide range of applications including HVAC installation, CFM calculations, duct ventilation, shooting, boat sailing, kite flying, climbing, and drone operation.
Fitur konci:
- Measures wind speed in 5 units: m/s, km/h, ft/min, mph, Knots.
- Measures wind temperature: -10-45°C (14-113°F) with °C/°F units.
- Air volume range: 0-999900 m³/min, configurable for CMM/CMS/CMF.
- Touch-screen interface with anti-interference buttons for ease of use.
- Waterproof and dustproof design.
- Lampu latar pikeun ningkatkeun pisibilitas dina kaayaan cahaya anu kirang.
- Adjustable auto-off time (default 5 minutes without operation) to save battery.
- Rechargeable 400mAh battery (40 mins full charge, approx. 30 hours continuous use) via Type-C interface.
- Lampu indikator batréna handap.
- Integrated tripod hole for hands-free operation (tripod not included).
Figure 1: AOPUTTRIVER AP-6000GH HVAC Anemometer
2. Eusi Paket
Saatos muka bungkusan, mangga pariksa yén sadaya barang anu didaptarkeun di handap aya sareng dina kaayaan anu saé:
- 1 x AP-6000GH CFM Anemometer
- 1 x Manual Pamaké
- 1 x Kabel Tipe-C
- 1 x Obeng Leutik
Figure 2: All items included in the AP-6000GH package.
3. Setélan
3.1 Pamasangan batré
The AP-6000GH anemometer comes with a pre-installed rechargeable battery. However, for initial use, you may need to connect the battery line interface.
- Use the provided small screwdriver to unscrew the battery cover on the back of the device.
- Connect the battery line interface if it is disconnected.
- Tighten the battery cover securely.
Figure 3: Steps for connecting the battery line interface.
3.2 Ngecas Alat
The device features a fast-charging 400mAh battery. A full charge takes approximately 40 minutes and provides about 30 hours of continuous use.
- Sambungkeun kabel Tipe-C anu disayogikeun kana port ngecas dina alat sareng kana sumber daya USB anu cocog.
- The battery sign on the display will flash while charging. It will stop flashing when fully charged.
- A low battery indicator light will notify you when charging is needed.
Figure 4: Charging the AP-6000GH anemometer via Type-C cable.
4. Parentah Operasi
4.1 Daya Hurung/Pareuman
Pencét éta Kakuatan button (usually marked with a circle and a vertical line) to turn the device on or off.
4.2 Fungsi konci Leuwihview
Gambar 5: Leuwihview of AP-6000GH display and button functions.
- Tombol kakuatan: Ngahurungkeun / mareuman alat.
- konci MODE: Switches between wind speed/air volume modes.
- UNIT Key: Cycles through different measurement units for wind speed (m/s, km/h, ft/min, mph, Knots).
- SET konci: Used to set air volume area or temperature units (°C/°F).
- Data Hold/Backlight Key: Short press to hold current data on display. Long press to activate/deactivate backlight.
- MAX/MIN Keys: Displays maximum or minimum recorded values during a measurement session.
4.3 Unit Switching and Backlight Demonstration
The following video demonstrates how to switch between different measurement units for wind speed and activate the backlight feature on the anemometer.
Video 1: Demonstration of unit switching and backlight activation on a handheld wind speed meter.
4.4 Basic Operation and Applications
Video ieu nyayogikeun gambaran gancangview of the anemometer's ease of use and its suitability for various tasks.
Video 2: Quick demonstration of the anemometer's easy operation.
4.5 Hands-Free Operation with Tripod
The anemometer includes a tripod hole at the bottom, allowing for stable, hands-free measurements. This is particularly useful for HVAC installations, CFM calculations, or outdoor activities where continuous monitoring is required.
Figure 6: Tripod mounting hole located at the bottom of the anemometer.
Gambar 7: Kelamples of applications for the AP-6000GH anemometer.
5. Spésifikasi
| Spésifikasi | Nilai |
|---|---|
| Dimensi produk | 6.69 x 3.39 x 1.3 inci |
| Item Beurat | 5.3 ons (150 gram) |
| Produsén | AOPUTTRIVER |
| Bahan | palastik |
| Batré diperlukeun | No (Rechargeable) |
| Komponén Kaasup | Kantong |
6. Pangropéa
To ensure the longevity and accuracy of your AOPUTTRIVER AP-6000GH anemometer, please follow these maintenance guidelines:
- Jaga alat tetep bersih ku cara ngusap ku kaén anu lembut sareng garing. Ulah make cleaners abrasive atawa pangleyur.
- Ensure the fan blades are free from dust and debris to maintain accurate readings.
- Simpen alat dina wadah mawa pelindung nalika henteu dianggo pikeun nyegah karusakan.
- Hindarkeun ngalaan alat ka suhu anu ekstrim atanapi sinar panonpoé langsung kanggo waktos anu berkepanjangan.
- Ngeusi batre rutin, sanajan alat teu sering dipake, pikeun ngajaga kaséhatan batré.
7. Cara ngungkulan
If you encounter any issues with your AP-6000GH anemometer, please refer to the following common troubleshooting steps:
- Alat teu hurung: Pastikeun batréna disambungkeun leres tur dicas pinuh.
- Bacaan teu akurat: Check if the fan blades are obstructed or dirty. Ensure the device is held correctly in the airflow direction.
- Masalah tampilan: If the display is dim, activate the backlight. If the display is unresponsive, try restarting the device.
- CFM/Air Volume calculation errors: Double-check the entered air area settings. Refer to the user manual for detailed instructions on setting air area.
Lamun masalah persists, mangga ngahubungan rojongan customer pikeun pitulung salajengna.
8. Rojongan & Garansi
The AOPUTTRIVER AP-6000GH anemometer comes with 365 days of technical support. If you experience any problems with your product, please contact AOPUTTRIVER customer service. They are committed to responding and resolving issues as quickly as possible.
For support, please refer to the contact information provided in your product packaging or visit the official AOPUTTRIVER websitus.
