Radial Reamp HP Passive Reamping Device User Manual

Bubuka

Image: The Radial Reamp HP Passive Reamping Device, a compact black box with white lettering for "Reamp HP Studio Reamper" and "Radial Engineering" logo. It features input and output jacks, a level knob, and switches for mono and ground lift.

The Radial Reamp HP is a flexible, passive reamping device designed to convert a line-level signal from a headphone output into an instrument-level signal suitable for reamping through guitar amplifiers, pedals, or other instrument-level equipment. This device allows engineers and musicians to re-record tracks through different setups without needing to re-perform the original part, offering creative flexibility and time-saving benefits in the studio.

It features inputs for both 1/4-inch and 3.5mm plugs, making it compatible with a wide range of audio interfaces, smartphones, and tablets. The built-in isolation transformer and ground lift switch help eliminate noise and hum, ensuring a clean signal path.

Fitur

Passive ReampAlat Pangropéa: Converts line-level signals to instrument-level without requiring external power.
1/4" and 3.5mm Inputs: Versatile connectivity for audio interfaces, smartphones, and tablets.
Isolation Transformer: Helps eliminate ground loops and noise.
Ground lift switch: Further reduces hum and buzz from ground loop issues.
Saklar Mono: Allows summing stereo headphone outputs to a mono signal for reamping.
Kontrol tingkat: Adjustable output level to fine-tune the signal sent to the amplifier or pedal.

Disetél

Before connecting the Reamp HP, ensure all audio equipment is powered off to prevent potential damage from sudden signal spikes.

Nyambungkeun ka Interface Audio

Connect the headphone output of your audio interface to the 1/4" INPUT or 3.5mm MINI IN jack on the Reamp HP. Use the appropriate cable (TRS 1/4" or 3.5mm stereo cable).
Connect the OUTPUT of the Reamp HP to the input of your guitar amplifier, effects pedal chain, or instrument-level input on another device using a standard 1/4" TS instrument cable.
If your audio interface's headphone output is stereo and you wish to reamp a mono signal, engage the MONO switch on the Reamp HP. This sums the stereo signal to mono.
Adjust the LEVEL knob on the Reamp HP to control the signal strength sent to your amplifier or pedals. Start with the knob fully counter-clockwise and slowly increase it.
If you experience hum or buzz, try engaging the LIFT switch. This disconnects the ground connection between the Reamp HP and the connected equipment, often resolving ground loop issues.

Radial Reamp HP connected to an audio interface and guitar amppangagung

Image: The Radial Reamp HP connected to a red audio interface, with a cable running from the Reamp HP's output to a guitar amplifier. This illustrates a typical reampsetelan.

Diagram showing Radial Reamp HP connection with audio interface, monitors, and amppangagung

Image: A block diagram illustrating the signal flow for reamping. An audio interface connects to studio monitors and a laptop. The headphone output of the interface connects to the Reamp HP. The Reamp HP's output goes through a pedalboard to a guitar amplifier, which is then miked and returned to the audio interface. This visualizes the complete reamping chain.

Nyambungkeun ka Smartphone atanapi Tablet

Connect the headphone output of your smartphone or tablet to the 3.5mm MINI IN jack on the Reamp HP using a standard 3.5mm stereo cable.
Connect the OUTPUT of the Reamp HP to the input of your guitar amplifier or effects pedal chain.
Engage the MONO switch if you are reamping a mono signal from a stereo source.
Adjust the LEVEL knob on the Reamp HP and the volume on your smartphone/tablet to achieve the desired signal level.
Use the LIFT switch if ground hum is present.

Diagram showing Radial Reamp HP connection with tablet and amppangagung

Image: A block diagram showing a tablet connected to the Reamp HP via its headphone output. The Reamp HP's output then feeds a pedalboard and a guitar amplifier, illustrating how mobile devices can be used for reamping.

Operating the Reamp HP

The Radial Reamp HP is designed for straightforward operation. Once connected, its primary function is to convert the signal and provide necessary impedance matching and ground isolation.

Input (1/4" and 3.5mm Mini In): These are the inputs for your line-level source (e.g., headphone output of an audio interface, smartphone, or tablet).
Saklar Mono: When engaged, this switch sums the left and right channels of a stereo input into a single mono signal. This is crucial when reamping a stereo track through a mono amplifier or pedal.
Kenop Level: This control adjusts the output level of the Reamp HP. Use it to fine-tune the signal sent to your amplifier or effects pedals, ensuring optimal gain staging and preventing clipping.
Lift Switch: This is a ground lift switch. If you encounter hum or buzz in your audio signal, engaging this switch can break a ground loop, often resolving the noise.
Kaluaran: This 1/4" TS output delivers the reamped instrument-level signal to your amplifier, pedalboard, or other instrument-level input.

Samping view of Radial Reamp HP showing Level, Lift, and Output controls

Gambar: Sisi deukeut view of the Radial Reamp HP, highlighting the Level knob, Lift button, and 1/4" Output jack. This view helps identify the controls on the output side of the device.

Samping view of Radial Reamp HP showing Input, Mono, and Mini In controls

Gambar: Sisi deukeut view of the Radial Reamp HP, highlighting the 1/4" Input jack, Mono switch, and 3.5mm Mini In jack. This view helps identify the input controls on the device.

Pangropéa

The Radial Reamp HP is a passive device designed for durability and requires minimal maintenance. Following these guidelines will help ensure its longevity:

beberesih: Anggo lawon anu lemes sareng garing pikeun ngusap bagian luar unit. Ulah nganggo pembersih abrasif, pangleyur, atanapi kalembaban anu kaleuleuwihi, sabab ieu tiasa ngaruksak lapisan atanapi komponén internal.
Panyimpenan: Simpen unit dina tempat anu tiis sareng garing jauh tina sinar panonpoé langsung sareng suhu anu ekstrim.
Penanganan: While robust, avoid dropping the unit or subjecting it to severe impacts, which could damage internal circuitry or connectors.
Sambungan: Periodically check all cable connections for wear and tear. Ensure cables are securely plugged in but do not overtighten.

Pamérésan masalah

Masalah	Mungkin Cukang lantaranana	Solusi
No sound or very low output.	Sambungan kabel salah. Volume alat sumber handap teuing. Reamp HP Level knob too low. Kabel lepat.	Ensure all cables are correctly and securely connected. Increase the volume on your audio interface, smartphone, or tablet. Turn the LEVEL knob on the Reamp HP clockwise to increase output. Coba kabel anu béda.
Hum or Buzz (Ground Loop).	Ground loop between connected equipment.	Engage the LIFT switch on the Reamp HP. Ensure all equipment is plugged into the same power outlet or power conditioner.
Distorted or clipped sound.	Sinyal input panas teuing. Reamp HP Level knob too high. Amplifier/pedal input overloaded.	Reduce the output volume from your source device (audio interface, smartphone). Turn the LEVEL knob on the Reamp HP counter-clockwise to decrease output. Adjust input gain on your amplifier or pedals.
Stereo signal sounds incorrect or phasey when reamped.	Mono switch not engaged for mono reamping.	Engage the MONO switch on the Reamp HP to sum the stereo input to mono.

spésifikasi

Fitur	Rincian
Tipe Alat	Passive Reampdina Alat
Input	1 x 1/4" TRS (Input), 1 x 3.5mm TRS (Mini In)
Kaluaran	1 x 1/4" TS (Output)
Kadali	Level, Mono Switch, Ground Lift Switch
Isolasi	Built-in Isolation Transformer
Diménsi	5.15 x 2.95 x 2.3 inci
Beurat	0.011 ons
Nomer modél	R800 1038

Garansi sareng Rojongan

Radial Engineering products are designed and manufactured to the highest standards. For specific warranty information and technical support, please refer to the official Radial Engineering websitus atanapi ngahubungan layanan palanggan maranéhanana langsung. Simpen resi pameseran anjeun salaku bukti pameseran pikeun klaim garansi.

Kanggo inpormasi anu pangénggalna, mangga buka: www.radialeng.com

	Radial JDI pasip langsung Box Guide pamaké Buku pituduh komprehensif pikeun kotak langsung pasif Radial JDI, ngajéntrékeun fitur, spésifikasi, aplikasi, sareng ngungkulan na. Diajar ngeunaan trafo Jensen na, impedansi input/output, sareng kumaha carana ngahontal kinerja audio anu optimal.
	Radial HotShot MD Stage Pituduh Pamaké Mic Switcher Buku pituduh pikeun Radial HotShot MD, sigatage switcher mikropon dirancang pikeun rerouting sakedapan mikropon dinamis ka sababaraha tujuan, featuring kadali gampang pikeun vokalis jeung komunikasi band.
	Radial J48 Active Direct Box Pamaké Guide Comprehensive user guide for the Radial J48 Active Direct Box, detailing its features, functions, specifications, and warranty information for professional audio applications.
	Radial StageBug SB-2 Passive Direct Box Quick Start Guide Quick start guide for the Radial StageBug SB-2, a compact passive direct box for active basses and keyboards. Learn how to connect and use the device with instruments and PA systems, including setup diagrams.
	Radial Headbone VT Guide pamaké: gitar Amp Ngalihkeun sirah Buku pituduh komprehensif pikeun Radial Headbone VT, alat anu ngamungkinkeun gitaris pindah antara dua tube amphuluna lifier sarta kabinét spiker tunggal jeung kontrol footswitch. Nyertakeun setelan, fitur, kaamanan, sareng ngungkulan masalah.
	Radial Workhorse Powerhouse 500 Runtuyan Rack Guide pamaké Buku pituduh pikeun Radial Workhorse Powerhouse, pigura rak runtuyan 10-slot 500. Rincian fitur, pamasangan, aliran sinyal, catu daya, spésifikasi, sareng inpormasi garansi pikeun insinyur audio profésional.

Radial Engineering R800 1038