1. Bubuka
Thank you for choosing the Onforu 65W LED Motion Sensor Outdoor Flood Light. This manual provides essential information for the safe installation, operation, and maintenance of your new lighting fixture. Please read these instructions thoroughly before installation and retain them for future reference.
Image 1.1: Two Onforu 65W LED Motion Sensor Outdoor Flood Lights.
2. Émbaran Kasalametan penting
PERHATOSAN: Risk of electric shock. Installation must be performed by a qualified electrician in accordance with all local electrical codes and ordinances. Always turn off power at the circuit breaker before installation or servicing.
- Do not connect to a dimmer switch.
- Ensure the power supply is 120V AC, 60Hz.
- Do not attempt to disassemble or modify the fixture.
- Jauhkeun bahan anu gampang kaduruk tina lampu.
- Suitable for wet locations. Ensure all connections are properly sealed.
3. Eusi Paket
Pastikeun yén sadaya komponén aya sareng henteu ruksak sateuacan neraskeun pamasangan.
- Onforu 65W LED Motion Sensor Outdoor Flood Light (2 units)
- Ningkatna Kurung
- Gasket karét
- Kawat Kacangan
- Pamasangan screws
- Instruksi Manual
4. Fitur Produk
- Caang Tinggi & Éfisiensi Énergi: 6500 Lumens output from 65W LED, equivalent to 450W traditional bulbs.
- Desain adjustable: Three adjustable heads provide a 270-degree detection zone for wide coverage.
- Enhanced Motion Sensor: 180-degree sensing angle, detecting motion up to 72 feet away. Adjustable lighting time from 10 seconds to 7 minutes.
- Awét & Tahan Cuaca: IP65 waterproof and dust-proof rating, made of die-cast aluminum for excellent heat dissipation and long lifespan.
- Suhu warna: 6500K Daylight White for clear, bright illumination.
Image 4.1: Key features of the Onforu LED Motion Sensor Outdoor Flood Light.
Image 4.2: Aluminum construction for efficient heat dissipation.
5. Pitunjuk Instalasi
Sateuacan Anjeun Ngawitan: Ensure power is OFF at the circuit breaker. Recommended installation height is 8.2-16.4 feet (2.5-5 meters).
5.1 Pilihan pamasangan
The fixture can be mounted on a wall or soffit.
Image 5.1: Soffit Mounted vs. Wall Mounted installation examples.
5.2 Parentah Wiring
- Pareuman kakuatan dina pemutus sirkuit utama.
- Gantelkeun bracket ningkatna kana kotak simpang ngagunakeun screws disadiakeun.
- Sambungkeun kawat:
- Black (L): Connect to the live wire from the power supply.
- White (N): Connect to the neutral wire from the power supply.
- Green (GND): Connect to the ground wire from the power supply.
- Ensure the rubber gasket is properly seated between the fixture and the mounting surface to maintain IP65 rating.
- Ngamankeun fixture lampu ka bracket ningkatna.
- Adjust the light heads to the desired angles.
- Balikkeun kakuatan dina circuit breaker.
Image 5.2: Wiring diagram and product dimensions.
Image 5.3: Visual guide for installation steps.
6. Parentah Operasi
The motion sensor has three adjustable knobs for customization:
- SENS (Sensitipitas): Adjusts the detection distance. Turn towards '-' for lower sensitivity (up to 10m) or '+' for higher sensitivity (up to 22m/72ft).
- LUX (Ambient Light): Determines when the sensor activates. Turn towards the moon icon for activation only at night (less than 10 LUX). Turn towards the sun icon for activation during both day and night.
- TIME (Time Delay): Sets how long the light stays on after motion is detected. Adjustable from 10 seconds to 7 minutes. Turn towards '-' for shorter duration or '+' for longer duration.
Image 6.1: Motion sensor adjustment knobs for LUX, SENS, and TIME.
7. Pangropéa
- Clean the fixture regularly with a soft, damp lawon. Ulah make cleaners abrasive atawa pangleyur.
- Periodically check electrical connections for tightness and signs of wear.
- Ensure the motion sensor lens is clear of dirt, dust, or obstructions for optimal performance.
8. Cara ngungkulan
| Masalah | Mungkin Cukang lantaranana | Solusi |
|---|---|---|
| Lampu henteu hurung. | No power; incorrect wiring; LUX setting too low. | Check circuit breaker; verify wiring connections; adjust LUX setting towards 'sun' icon. |
| Lampu terus hurung. | Continuous motion detected; TIME setting too long; wiring issue. | Ensure no constant motion in detection area; adjust TIME setting to shorter duration; check wiring (live and neutral might be reversed). |
| Sénsor gerak henteu ngadeteksi. | SENS setting too low; obstructions; incorrect mounting height. | Adjust SENS setting towards '+'; clear obstructions from sensor view; verify mounting height is within recommended range. |
| Cahya ngageleber. | Loose wiring connection; unstable power supply. | Check and tighten all wiring connections; consult an electrician for power supply issues. |
9. Spésifikasi
| Fitur | Spésifikasi |
|---|---|
| merek | Onforu |
| Nomer modél | BDB55G-3 |
| Wattage | 65 Watt |
| Caang | 6500 Lumén |
| Suhu Warna | 6500 Kelvin (Daylight Bodas) |
| Sudut Sénsor gerak | 180° |
| Jarak Deteksi Gerak | Nepi ka 72 suku |
| Time Reureuh adjustment | 10 detik nepi ka 7 menit |
| Tingkat Résistansi Cai | IP65 Waterproof |
| Bahan | Metal (Die-cast Aluminum) |
| Voltage | 120 volt |
| Dimensi produk | 10.7 "L x 5.8" W x 4.7" H |
| Jumlah Sumber Cahaya | 3 (Adjustable Heads) |
| Tipe Pamasangan | Tembok Gunung |
10. Jaminan & Dukungan
This Onforu product comes with a Limited Warranty. For specific details regarding the warranty period and coverage, please refer to the warranty information provided with your purchase or contact Onforu customer support.
For technical support, troubleshooting assistance, or any inquiries, please contact Onforu customer service through the retailer's platform or visit the official Onforu websitus.