SUNLU PLA Matte 3D Printer Filament User Manual

1. Bubuka sarta Produk Leuwihview

The SUNLU PLA Matte 3D Printer Filament is designed to produce prints with a beautiful matte, low-gloss, and smooth finish, effectively concealing layer lines for a frosted texture. This filament is engineered for high precision and consistency, ensuring reliable and high-quality 3D printing.

Smooth Matte Finish: Achieves a frosted texture that hides layer lines.
Neatly Wound: Advanced winding technology prevents knots and tangles, improving printing efficiency.
Dimensional Accuracy & Consistency: Features a dimensional accuracy of +/- 0.02mm, with minimum tolerance and low warping for stable prints and good layer bonding.
No Clogging & No Bubble: Manufactured in a dry, dust-free environment and vacuum-sealed to prevent moisture absorption, reducing clogging and bubbling problems.

Figure 1: SUNLU PLA Matte Black Filament Spool with a 3D printed duck, showcasing the matte finish.

Vacuum-sealed filament package and various FDM 3D printers — Figure 2: The filament comes in a vacuum-sealed package and is compatible with most FDM 3D printers.

Produk Leuwihview Video

Video 1: Hiji leuwihview of SUNLU 3D Filament, highlighting its features and benefits.

2. Setélan

2.1 Ngabongkar jeung Persiapan

Upon receiving your SUNLU PLA Matte filament, ensure the vacuum-sealed packaging is intact. Open the package carefully and remove the filament spool. It is recommended to store unused filament in its sealed bag with desiccant to prevent moisture absorption.

2.2 Spool Installation (Reusable Spool)

Some SUNLU filaments come with a reusable spool design. To install, find the 'Line 1', 'unlock', and 'lock' marks on the spool. Align the marks to unlock, install the filament, and then turn 'Line 1' to 'lock' to secure it.

Diagram showing how to use the SUNLU reusable spool — Figure 3: Step-by-step guide for installing filament on a SUNLU reusable spool.

2.3 Printer Compatibility

SUNLU PLA Matte filament is designed to be compatible with most FDM 3D printers. Ensure your printer's filament holder can accommodate a spool diameter of 8.00 inches, a spool width of 2.50 inches, and a spool hub hole diameter of 2.20 inches.

3. Parentah Operasi

3.1 Setélan Citak anu Disarankeun

For optimal results with SUNLU PLA Matte filament, the following settings are recommended:

Suhu nozzle: 200-230°C
Bed Temperature: 50-65°C
Laju percetakan: 50-100mm / s

Recommended printing settings for SUNLU PLA filament — Figure 4: Visual representation of recommended print settings.

3.2 Filament Loading and Unloading

Follow your 3D printer's specific instructions for loading and unloading filament. Ensure the filament is fed smoothly into the extruder without kinks or excessive force. When unloading, heat the nozzle to the recommended temperature before carefully pulling the filament out.

3.3 Print Quality and Characteristics

SUNLU PLA Matte filament is known for its smooth matte finish, excellent layer adhesion, and minimal stringing. The precise dimensional accuracy contributes to stable and consistent prints.

Comparison of matte PLA print vs. glossy PLA print — Figure 5: A comparison showing the superior smooth matte finish of SUNLU PLA Matte over glossy PLA.

Caliper measuring filament diameter, indicating dimensional accuracy — Figure 6: The filament maintains consistent diameter for reliable feeding and printing.

Print Quality Examples

Video 2: Demonstrates the matte finish and print quality of SUNLU PLA Matte Pink filament.

Video 3: Shows the smooth finish and print quality of SUNLU PLA Matte Blue filament.

Video 4: Highlights the matte finish and print quality of SUNLU PLA Matte Olive Green filament.

4. Pangropéa

4.1 Panyimpenan Filamén

To maintain filament quality and prevent moisture absorption, always store unused filament in its original vacuum-sealed bag with the included desiccant. Keep in a cool, dry place away from direct sunlight.

4.2 Dealing with Knotted Filament

In rare cases, filament may become knotted. If you encounter a knot, carefully unspool the affected section and smooth out any twists or tangles before re-spooling. Always ensure the filament end is secured in the spool's wire hole when not in use to prevent tangling.

Video 5: Instructions on how to deal with knotted filament and re-spool correctly.

5. Cara ngungkulan

5.1 Masalah Percetakan Umum

Masalah	Mungkin Cukang lantaranana	Solusi
Sumbatan	Incorrect temperature, dust/debris, moisture absorption.	Adjust nozzle temperature, clean nozzle, dry filament.
Nyaring	High nozzle temperature, incorrect retraction settings.	Lower nozzle temperature, optimize retraction distance/speed.
Poor Adhesion	Dirty print bed, incorrect bed temperature, improper bed leveling.	Clean print bed, adjust bed temperature (50-65°C), re-level bed.
Leumpang	Insufficient bed temperature, drafts, large prints.	Increase bed temperature, use enclosure, add brim/raft.

6. Spésifikasi

merek: SUNLU
Bahan: Asam Polylactic (PLA)
warna: 1000g Pla Black (Current Product)
Beurat barang: 2.2 pon (1 Kilogram)
Ukuran produk: 7.87 x 2.56 x 7.87 inci
Item diaméterna: 1.75 milimeter
Dimensional Accuracy: +/- 0.02 mm
Spool Diameter: 8.00 inci
Spool Width: 2.50 inci
Spool Hub Hole Diameter: 2.20 inci
Nomer Bagian Pabrikan: FR-PLAYG-BK-1KG
Titimangsa munggaran sadia: 16 Séptémber 2022

7. Garansi jeung Rojongan

This product is covered by a 30-day return policy for refund or replacement. For further support, please visit the official SUNLU Store on Amazon or contact their customer service.

Official SUNLU Store: SUNLU Store

	SUNLU FilaDryer S2: Manual pamaké sarta Pituduh pikeun Filamén Drying Manual pamaké komprehensif pikeun SUNLU FilaDryer S2, detailing setelan, operasi, setelan pribadi, ngungkulan, sarta tips pikeun drying filamén percetakan 3D optimal. Diajar kumaha ngagaringkeun PLA, PETG, ABS, sareng seueur deui.
	SUNLU FilaDryer S4 Guide pamaké pikeun 3D Printing Filamén Pituduh pamaké resmi pikeun SUNLU FilaDryer S4, alat nu dirancang pikeun garing jeung nyimpen filamén percetakan 3D, mastikeun kualitas percetakan optimal. Diajar ngeunaan setelan, operasi, jeung perawatan.
	SUNLU FilaDryer S4 Guide pamaké - 3D Printing Filamén Dryer Buku pituduh komprehensif pikeun SUNLU FilaDryer S4, pengering filamén percetakan 3D. Diajar ngeunaan setelan, operasi, ngungkulan masalah, sarta dianjurkeun suhu drying pikeun sagala rupa jenis filamén.
	Pituduh Pangguna SUNLU FilaDryer S4: Optimalkeun Filamen Percetakan 3D Anjeun Pituduh pangguna anu lengkep pikeun SUNLU FilaDryer S4. Diajar kumaha cara ngagaringkeun filamén percetakan 3D anjeun sacara aman sareng efektif pikeun hasil anu optimal, kalebet setelan, operasi, sareng ngungkulan masalah.
	SUNLU FilaDryer S2 Panungtun Pamaké - Filamén Drying jeung Panyimpenan Buku pituduh komprehensif pikeun SUNLU FilaDryer S2, ngajéntrékeun fitur-fiturna pikeun ngeringkeun sareng nyimpen filamén percetakan 3D. Ngawengku paréntah pangaturan, operasi, sareng pangropéa.
	SUNLU Filament Connector FC01 Usage Instructions User guide for the SUNLU Filament Connector FC01, detailing its parts, specifications, troubleshooting, and step-by-step instructions for fusing 3D printer filament.

SUNLU FR-PLAYG-BK-1KG