Andoer AC-04 Wireless Trigger System

1. Bubuka

This manual provides detailed instructions for the safe and effective use of your Andoer AC-04 Wireless Trigger System. This system is designed to wirelessly trigger studio flash lights, enhancing flexibility and efficiency in photographic setups. Please read this manual thoroughly before operating the device and retain it for future reference.

2. Émbaran Kasalametan

Pikeun nyegah karusakan kana produk atanapi cilaka ka diri anjeun atanapi batur, perhatoskeun tindakan pencegahan kaamanan ieu:

• Ulah ngalaan alat ka cai atawa kalembaban kaleuleuwihan.
• Hindarkeun ragrag atanapi ngagentoskeun alat kana tabrakan anu kuat.
• Ulah nyobian ngabongkar atanapi ngarobih alat. Perbaikan ngan ukur kedah dilakukeun ku petugas servis anu diidinan.
• Jauhkeun alat tina médan magnét anu kuat.
• Anggo ngan ukur sumber daya sareng asesoris anu ditangtukeun.
• Pastikeun ventilasi anu cekap nalika dianggo pikeun nyegah panas teuing.

3. Eusi Paket

Pastikeun yén sadaya item anu didaptarkeun di handap kalebet kana pakét anjeun:

• 1 x Wireless Transmitter Unit
• 1 x Wireless Receiver Unit (AC-04)
• 1 x Adaptor 3.5mm dugi ka 6.35mm

Gambar 3.1: All components of the Andoer AC-04 Wireless Trigger System, including the transmitter, receiver, and the 3.5mm to 6.35mm adapter.

4. Produk Langkungview

The Andoer AC-04 Wireless Trigger System consists of a transmitter and a receiver, designed for reliable wireless control of studio flash units. It features 4 selectable channels to avoid interference.

4.1. Unit pamancar

The transmitter unit mounts onto your camera's hot shoe. It sends the trigger signal to the receiver when the camera's shutter is released.

Gambar 4.1: The transmitter unit (top left) with its cold shoe mount and the receiver unit (bottom right) labeled AC-04.

4.2. Receiver Unit (AC-04)

The receiver unit connects to your studio flash light. It receives the signal from the transmitter and triggers the flash. It features a power input and a sync port.

Gambar 4.2: The AC-04 receiver unit connected to its power cable and sync cable, alongside the transmitter and adapter.

4.3. 3.5mm to 6.35mm Adapter

This adapter ensures compatibility with various studio flash units that may have either a 3.5mm or 6.35mm sync port.

Gambar 4.3: Diwincik view of the 3.5mm jack, the 6.35mm adapter, and the power input/output connectors.

5. Setélan

Follow these steps to set up your wireless trigger system:

1. Pasang Batré (upami aya): The product description does not specify battery requirements. If your units require batteries, insert them according to the polarity markings.
2. Pasang Pemancar: Slide the transmitter unit onto your camera's hot shoe. Ensure it is securely fastened.
3. Connect the Receiver to Flash:
   • Connect the power cable of the receiver unit to a suitable power outlet.
   • Identify the sync port on your studio flash light.
   • Connect the sync cable from the receiver to the flash unit. If your flash unit has a 6.35mm port, use the provided 3.5mm to 6.35mm adapter.
4. Pilih Saluran: Both the transmitter and receiver units have channel selectors (typically switches labeled 1-4). Set both units to the same channel to ensure proper communication. For example, if the transmitter is set to channel 1, the receiver must also be set to channel 1.

6. Parentah Operasi

Once setup is complete, operate the system as follows:

1. Daya Hurung: Ensure both your camera and studio flash unit are powered on. The receiver unit should also be powered on (if it has a separate power switch).
2. Pemicu Tés: Most transmitters have a test button. Press this button to manually trigger the flash and confirm the connection. The flash should fire.
3. Candak Poto: With the system properly configured and tested, you can now take photos. When your camera's shutter is released, the transmitter will send a signal to the receiver, triggering the studio flash.
4. Change Channels (if needed): If you experience interference from other wireless devices, change the channel on both the transmitter and receiver to a different matching channel (e.g., from 1 to 2).

7. Pangropéa

Proper care and maintenance will extend the life of your wireless trigger system:

• beberesih: Anggo lawon anu lemes sareng garing pikeun ngabersihkeun bagian luar unit. Entong nganggo pembersih cair atanapi pelarut.
• Panyimpenan: Nalika henteu dianggo, simpen unit dina tempat anu tiis, garing, jauh tina sinar panonpoé langsung sareng suhu anu ekstrim.
• Ngagantian batré: If the units use batteries, replace them when performance degrades or if the units will be stored for an extended period to prevent leakage.
• Pamariksaan kabel: Regularly inspect all cables for signs of wear or damage. Replace damaged cables immediately.

8. Cara ngungkulan

9. Spésifikasi

10. Jaminan & Dukungan

Andoer products are manufactured to high quality standards. For information regarding warranty coverage, technical support, or service, please refer to the warranty card included with your product or visit the official Andoer websitus. Punten tahan bukti pameseran anjeun pikeun klaim garansi.