1. Bubuka
This manual provides detailed instructions for the installation and maintenance of the Uniview TR-JB07-D-IN Bullet Junction Box. This junction box is designed to provide a secure and organized enclosure for cable connections of compatible Uniview bullet cameras, suitable for both outdoor and indoor environments.
2. Émbaran Kasalametan
- Salawasna pegatkeun sambungan kakuatan saméméh instalasi atawa perawatan.
- Pastikeun sadaya sambungan aman sareng insulasi leres pikeun nyegah bahaya listrik.
- Pamasangan kedah dilaksanakeun ku tanaga anu mumpuni luyu sareng kode listrik lokal.
- Ulah ngalaan produk kana gaya atanapi dampak anu kaleuleuwihi.
- Use only specified mounting hardware.
3. Eusi Paket
Pariksa yén sadaya komponén aya sateuacan neraskeun pamasangan:
- Uniview TR-JB07-D-IN Bullet Junction Box
- Pasang Sekrup (jumlahna tiasa béda-béda)
- Wall Plugs (quantity may vary)
- Citakan Instalasi (upami kalebet)
4. Setup jeung Instalasi
The TR-JB07-D-IN junction box is designed for use with Uniview IPC23XX/222X, IPC74X, and IPC252/26X series bullet cameras. It provides a secure and weather-resistant housing for cable management.
Gambar 1: Hareupeun view of the Uniview TR-JB07-D-IN Bullet Junction Box. This image displays the main body of the junction box, highlighting the central opening for cable routing and the various screw holes for mounting the camera and securing the box to a surface. The "UP" arrow indicator is visible at the top left, guiding correct orientation.
4.1 Mounting Location Selection
Choose a flat, stable surface capable of supporting the combined weight of the junction box and the camera. Ensure the location allows for proper cable routing and provides the desired camera view.
4.2 Léngkah-léngkah Instalasi
- Nyiapkeun permukaan: If mounting on a wall, use the provided template (if applicable) or the junction box itself to mark the drilling points for the mounting screws.
- liang bor: Drill pilot holes at the marked locations. Insert wall plugs if mounting on masonry or drywall.
- Pasangkeun Kotak Sambungan: Secure the junction box to the mounting surface using the provided screws. Ensure the "UP" indicator on the box is correctly oriented.
- Kabel Rute: Pass the camera cables through the central opening or the extra back outlet of the junction box.
- Sambungkeun Kaméra: Mount the compatible Uniview bullet camera onto the junction box using its designated mounting holes. Secure the camera firmly.
- Ngatur kabel: Neatly arrange excess cable length within the junction box to prevent interference or damage.
- Sambungan segel: Ensure all cable entries and connections are properly sealed to maintain the weather-resistant integrity of the installation.
5. Operasi
Universitasview TR-JB07-D-IN Bullet Junction Box is a passive component designed to facilitate the secure and weather-protected installation of compatible bullet cameras. Once installed, its primary function is to house and protect cable connections, ensuring the longevity and reliable operation of the connected camera system. No direct user operation is required beyond initial installation.
6. Pangropéa
- Inspeksi rutin: Periodically inspect the junction box for any signs of damage, corrosion, or loose connections.
- beberesih: Upami diperyogikeun, bersihan bagian luar kotak sambungan sacara saksama nganggo lap anu lemesamp lawon. Ulah make bahan kimia kasar atawa bahan abrasive.
- Integritas segel: Ensure that all seals and gaskets remain intact to prevent water ingress, especially in outdoor installations.
7. Cara ngungkulan
- asupan cai: If water is found inside the junction box, immediately power down the connected camera. Inspect all seals, cable glands, and mounting points for proper sealing. Re-seal or replace damaged components.
- Pasang Leupas: If the junction box feels loose, tighten the mounting screws. If the mounting surface is compromised, consider relocating or reinforcing the mounting area.
- Camera Instability: Ensure the camera is securely fastened to the junction box. Check that all camera mounting screws are tight.
8. Spésifikasi
| Fitur | Rincian |
|---|---|
| Modél | TR-JB07-D-IN |
| Aplikasi | Outdoor or indoor cable junction box for Uniview IPC23XX/222X, IPC74X, and IPC252/26X series cameras (with extra back outlet) |
| Ukuran (L x W x H) | Φ125mm x 125mm x 55mm (4.92” x 4.92” x 2.17”) |
| Beurat | 0.75 kg (1.65 lb) |
| Bahan | Alumunium alloy |
| Warna | kulawu poék |
9. Émbaran jaminan
This product is covered by Uniview's standard limited warranty. For detailed warranty terms and conditions, please refer to the official Uniview websitus atanapi hubungi dukungan palangganna. Simpen resi pameseran anjeun salaku bukti pameseran.
10. Rojongan Palanggan
For technical assistance, troubleshooting, or further inquiries regarding the Uniview TR-JB07-D-IN Bullet Junction Box, please visit the official Uniview rojongan website or contact their authorized service centers. Contact information can typically be found on the Uniview corporate websitus.
