LEXMAN Electromechanical Roller Shutter Motor User Manual

1. Émbaran Kasalametan

Please read all safety instructions carefully before installation and operation. Failure to follow these instructions may result in injury or damage to the product.

• Kasalametan listrik: Installation must be performed by a qualified electrician in accordance with local electrical codes. Ensure the power supply is disconnected before any installation or maintenance work.
• Lingkungan Operasi: The motor is designed to withstand temperatures from -20 °C to +40 °C and has an IP44 rating, indicating protection against solid objects larger than 1mm and splashing water from any direction. However, avoid direct exposure to extreme weather conditions or submersion.
• Barudak jeung Pets: Keep children and pets away from the operating area of the roller shutter. Do not allow them to play with controls.
• Halangan: Ensure there are no obstructions in the path of the roller shutter during operation.

2. Produk Langkungview

The LEXMAN Electromechanical Roller Shutter Motor is designed to automate the opening and closing of roller shutters, replacing manual operation. This model offers a torque of 10 Nm, suitable for various shutter types and sizes.

Katerangan Gambar: A view of the LEXMAN electromechanical roller shutter motor, showing its cylindrical body and the coiled electrical cable at one end.

Fitur konci:

• genah: Automates roller shutter operation, eliminating manual cranking.
• kakuatan: 10 Nm torque, capable of driving aluminum/PVC shutters up to 5 m² or wooden shutters up to 2 m².
• Daya tahan: IP44 rated for resistance to splashing water and suitable for temperatures from -20 °C to +40 °C.
• Pamasangan Gampang: Designed for quick and straightforward installation with a 4-wire system.

3. Setup jeung Instalasi

The motor is designed for integration into a roller shutter system. Detailed installation instructions are provided with the product. It is recommended that installation be carried out by a qualified professional.

Léngkah-léngkah Instalasi (Panduan Umum):

1. Persiapan: Ensure the power supply to the installation area is completely disconnected. Gather all necessary tools and components.
2. Pamasangan: Insert the motor into the roller shutter tube. Secure it according to the specific instructions for your roller shutter system.
3. Wiring: Connect the motor using its 4-wire system. The cables are 200 cm long, providing flexibility for connection. Ensure all connections are secure and correctly insulated.
4. Ngatur wates switch: Adjust the upper and lower limit switches to define the full open and full closed positions of your roller shutter. Refer to the specific instructions for precise adjustment procedures.
5. Uji coba: Restore power and test the motor's operation. Verify that the shutter moves smoothly between the set limits.

Katerangan Gambar: A technical diagram illustrating the motor's dimensions: a diameter of 40 mm, a length of 490 mm, and a cable length of 200 cm.

Katerangan Gambar: An illustration showing the roller shutter motor integrated into a window frame, with icons indicating its specifications (Ø 40 mm, 10 Nm, 5m² max for aluminum/PVC, 2m² max for wood).

4. Parentah Operasi

The LEXMAN roller shutter motor is operated via a wall switch. It is compatible with standard alternative switches and double-change switches (switches not included).

Operasi dasar:

• Opening the Shutter: Press the 'Up' button or position on your compatible wall switch. The motor will raise the shutter until it reaches the upper limit switch or until the button is released.
• Closing the Shutter: Press the 'Down' button or position on your compatible wall switch. The motor will lower the shutter until it reaches the lower limit switch or until the button is released.
• Stopping the Shutter: Press the opposite direction button or release the current button to stop the shutter at any desired position.

Katerangan Gambar: An illustration showing three types of switches. The first two, an up/down switch and a double-rocker switch, are marked with a green checkmark indicating compatibility. The third, a rotary dimmer-style switch, is marked with a red 'X' indicating incompatibility.

5. Pangropéa

The LEXMAN roller shutter motor is designed for minimal maintenance. Regular checks can help ensure its longevity and proper function.

• beberesih: Periodically clean the exterior of the motor and the roller shutter system to prevent dust and debris buildup. Use a soft, damp lawon. Ulah make cleaners abrasive atawa pangleyur.
• Pamariksaan: Annually inspect the motor and wiring for any signs of wear, damage, or loose connections. If any issues are found, disconnect power and consult a qualified technician.
• Lubrication: The motor is factory-lubricated and generally does not require additional lubrication. Refer to the roller shutter system's manual for lubrication requirements of other components.

6. Cara ngungkulan

If you encounter issues with your LEXMAN roller shutter motor, refer to the following common troubleshooting steps:

• Motor teu ngabales:
  • Check if the power supply to the motor is active.
  • Verify that the wall switch is correctly wired and functioning.
  • Ensure no circuit breakers have tripped.
• Shutter Stops Mid-Operation:
  • Check for any physical obstructions preventing the shutter from moving.
  • The motor may have overheated due to continuous operation. Allow it to cool down for 15-20 minutes before attempting operation again.
• Shutter Does Not Reach Limits:
  • The limit switches may need recalibration. Refer to the installation section or the specific instructions for limit switch adjustment.
• Sora anu teu biasa:
  • Disconnect power and inspect the motor and shutter mechanism for any loose parts or foreign objects.
  • If the noise persists, contact customer support or a qualified technician.

If these steps do not resolve the issue, please contact LEXMAN customer support or a certified technician.

7. Spésifikasi

Katerangan Gambar: A visual summary of key specifications: IP44 rating (umbrella icon), temperature resistance from -20°C to +40°C (thermometer icon), motor diameter Ø 40 mm, torque 10 Nm, maximum shutter area 5m² for aluminum/PVC, and 2m² for wood.

8. Garansi jeung Rojongan

For warranty information, please refer to the documentation provided with your purchase or contact your retailer. LEXMAN is committed to providing safe, durable, and smart electrical products.

If you require technical assistance, have questions about installation, or need to report a product issue, please contact LEXMAN customer support through their official channels or the retailer from whom you purchased the product.

For more information about LEXMAN products, you may visit their official website or brand store.