Buku Panduan Pangguna Pamiarsa Barcode Laser Nirkabel HDWR HD44

1. Bubuka

This manual provides comprehensive instructions for the safe and efficient operation of your HDWR HD44 Wireless Laser Barcode Scanner. Please read this manual thoroughly before using the device and retain it for future reference.

The HDWR HD44 wireless barcode scanner is designed for durability and comfort. Its ergonomic shape ensures convenient daily use. This scanner operates wirelessly using radio wave technology, providing freedom of movement within a 5-meter range via its USB receiver. An integrated memory allows storage of thousands of scanned codes for later transfer to a computer.

The scanner supports various 1D barcodes, including:

• EAN-13, EAN-8, UPC-A, UPC-E
• Code 39, Code 93, Code 128
• Interleaved 2 of 5, ITF-14, Industrial 2 of 5, Matrix 2 of 5
• Codabar, Code 11, MSI/Plessey, UK/Plessey
• GS1 DataBar, GS1 DataBar Limited

Image 1.1: HDWR HD44 Wireless Laser Barcode Scanner, USB receiver, and charging cable.

2. Eusi Paket

Mangga cék kotak pikeun item di handap ieu:

• HDWR HD44 Wireless Barcode Scanner
• Panarima USB
• Kabel Ngecas USB
• Manual pamaké

Image 2.1: The HDWR HD44 Wireless Barcode Scanner.

3. Setélan

3.1 Ngecas Scanner

Before first use, fully charge the scanner. Connect the USB charging cable to the scanner's charging port and the other end to a USB power source (e.g., computer USB port, USB wall adapter). The charging indicator light will show the charging status.

3.2 Nyambungkeun Panarima USB

1. Locate the USB receiver included in the package.
2. Plug the USB receiver into an available USB port on your computer or host device.
3. The system should automatically detect and install the necessary drivers. No manual driver installation is typically required.

Image 3.1: The USB receiver for wireless connection.

3.3 Powering on / Pareum

To power on the scanner, press and hold the trigger button for a few seconds until you hear a beep and the indicator light turns on. To power off, press and hold the trigger button again until the scanner powers down.

4. Parentah Operasi

4.1 Nyeken Dasar

1. Ensure the scanner is powered on and connected to your device via the USB receiver.
2. Arahkeun sinar laser panyeken kana barkod anu anjeun hoyong scan.
3. Press the trigger button. A successful scan will be indicated by a beep and/or a change in the indicator light.
4. The scanned data will be transmitted to your connected computer as keyboard input.

Image 4.1: The HDWR HD44 scanner operating wirelessly.

4.2 Using Integrated Memory

The HDWR HD44 scanner features an integrated memory to store scanned barcodes when out of range or when direct transmission is not desired. To utilize this feature:

1. Scan barcodes as usual. The scanner will automatically store them if not connected or if configured for storage mode.
2. To transfer stored data, ensure the scanner is connected to your computer via the USB receiver.
3. Scan the 'Upload Data' configuration barcode (refer to the full user manual for specific configuration barcodes). The stored data will then be transmitted to your computer.

5. Pangropéa

5.1 beberesih

To maintain optimal performance, keep the scanner clean. Use a soft, dry cloth to wipe the exterior. For the scanning window, use a soft, lint-free cloth lightly dampdibersihkeun ku pembersih anu hampang sareng henteu abrasif. Entong nganggo bahan kimia anu keras atanapi bahan abrasif.

5.2 Perawatan Batré

The scanner uses a Lithium-ion battery. To prolong battery life:

• Hindarkeun sering-sering ngeusi batre.
• Simpen scanner di tempat anu tiis sareng garing upami henteu dianggo salami waktos anu lami.
• Charge the battery regularly, even if not in constant use.

6. Cara ngungkulan

6.1 Scanner Not Responding

• Ensure the scanner is charged. Connect it to the charging cable and a power source.
• Verify the scanner is powered on. Press and hold the trigger button.
• Check the USB receiver connection to your computer. Try a different USB port.

6.2 Barcode Teu Nyeken

• Pastikeun barkodna bersih, teu ruksak, sareng dicitakna jelas.
• Saluyukeun jarak sareng sudut antara scanner sareng barkod.
• Check if the barcode type is supported by the scanner (refer to Section 1: Introduction).
• Clean the scanner's optical window as described in Section 5.1.

6.3 Data Not Transmitting to Computer

• Confirm the USB receiver is properly connected and recognized by the computer.
• Ensure the scanner is within the 5-meter wireless range of the receiver.
• If data was stored in memory, ensure you have initiated the data upload process (refer to Section 4.2).

7. Spésifikasi

8. Garansi jeung Rojongan

8.1 Garansi Produsén

The HDWR HD44 Wireless Laser Barcode Scanner comes with a 2-taun jaminan produsén urang. Garansi ieu nyertakeun cacad dina bahan sareng pagawean dina panggunaan normal. Punten tahan bukti pameseran anjeun pikeun klaim garansi.

8.2 Rojongan Palanggan

For technical assistance, troubleshooting, or warranty inquiries, please contact HDWR customer support through their official website or the retailer where the product was purchased. Please have your model number (HD44) and purchase details ready when contacting support.