Sylvania LED Wide Flood Light Luminaire 15W (Model 61325)

1. Bubuka

This manual provides essential information for the safe installation, operation, and maintenance of your Sylvania LED Wide Flood Light Luminaire, Model 61325. This 15W LED fixture is designed for outdoor applications, offering selectable color temperatures (3000K, 4000K, 5000K) and flexible mounting options.

Gambar 1: Hareupeun view of the Sylvania LED Wide Flood Light Luminaire. This image displays the rectangular bronze-finished housing with a white LED panel.

2. Émbaran Kasalametan

PERHATOSAN: Risk of electric shock. Improper installation can lead to serious injury or death. Always consult a qualified electrician if you are unsure about any part of the installation process.

• Pegatkeun Daya: Always turn off power at the circuit breaker before installing, servicing, or cleaning the fixture.
• Grounding: Pastikeun perlengkapanna dipasang dina ground anu leres pikeun nyegah sengatan listrik.
• Wiring: All wiring must comply with national and local electrical codes. Use UL-listed wire connectors.
• Fixture Integrity: Do not operate the fixture if any part is damaged. Inspect for damage before installation.
• Pamakéan outdoor: This fixture is rated for outdoor use. Ensure all connections are sealed and watertight to prevent moisture ingress.
• Suhu operasi: Do not install near heat sources or in environments exceeding the specified operating temperature range.

3. Eusi Paket

Pariksa yén sadaya komponén aya sateuacan ngamimitian pamasangan:

• Sylvania LED Wide Flood Light Luminaire (15W, Model 61325)
• Gunung Trunnion
• 1/2" Knuckle or Slipfitter Mount
• Manual Pitunjuk (dokumén ieu)

4. Fitur Produk

• kakuatan: 15 Watt
• Kaluaran cahaya: 2250 Lumén
• Khasiat: 150 Lumens Per Watt (LPW)
• Color Temperature (CCT) Selectable: 3000K (Bodas Haneut), 4000K (Bodas Tiis), 5000K (Daylight)
• rengse: Perunggu
• Jangka waktu hirup: Nepi ka 100,000 jam
• Sertifikasi: DLC Premium listed for energy efficiency
• Pamasangan: Includes trunnion and 1/2" knuckle/slipfitter for flexible installation
• Voltage: 110 volt
• Pamakéan: Luar
• Tahan cai: Tahan cai

5. Instalasi (Setup)

Before proceeding, ensure you have read and understood the Safety Information section.

5.1 Léngkah-léngkah Pra-Pamasangan

1. Turn off the electrical power at the circuit breaker or fuse box to avoid electrical shock.
2. Unpack the fixture and all components. Inspect for any shipping damage.
3. Determine the desired mounting location and method (trunnion or knuckle/slipfitter).

5.2 Parentah Wiring

The fixture is designed for 110V AC input. Follow these steps for electrical connections:

1. Nyambungkeun hideung kawat ti fixture kana live (hot) kawat suplai.
2. Nyambungkeun bodas kawat ti fixture kana nétral kawat suplai.
3. Nyambungkeun green (or bare copper) kawat ti fixture kana taneuh kawat suplai.
4. If using 0-10V dimming (optional), connect the ungu wire to the dimmer's Taram + terminal sareng kulawu wire to the dimmer's Taram- terminal. If not using dimming, cap and insulate these wires individually.
5. Secure all wire connections with appropriate UL-listed wire connectors and ensure they are properly insulated.

5.3 Masangkeun fixture

The luminaire includes both a trunnion mount and a 1/2" knuckle/slipfitter mount for versatile installation.

Figure 2: Luminaire with Knuckle Mount. This image shows the flood light attached to a knuckle mount, suitable for pole or wall mounting.

Figure 3: Luminaire with Trunnion Mount. This image displays the flood light with a flat trunnion mount, ideal for surface mounting.

1. Select Mount: Choose either the trunnion mount for flat surface installation or the 1/2" knuckle/slipfitter mount for pole or conduit attachment.
2. Pasang Gunung: Securely fasten the chosen mount to the desired surface using appropriate hardware (not included). Ensure the mount is stable and can support the fixture's weight.
3. Pasangkeun Perlengkapan: Connect the luminaire to the installed mount. For the knuckle mount, thread the fixture onto the 1/2" NPT opening. For the trunnion mount, secure the fixture to the bracket using the provided bolts.
4. Saluyukeun Sudut: Loosen the adjustment screws on the mount to set the desired lighting angle. Tighten securely once adjusted.
5. Sambungan segel: For outdoor installations, ensure all electrical connections and mounting points are properly sealed against moisture.

6. Operasi

6.1 Kakuatan Hurung

Once installation is complete and all connections are secure, restore power at the circuit breaker. The flood light should illuminate.

6.2 Pilihan Suhu Warna (CCT)

This fixture allows you to select between three color temperatures: 3000K (Warm White), 4000K (Cool White), and 5000K (Daylight).

To change the CCT, locate the small switch on the side of the fixture, often protected by a cap. Use a small tool to slide the switch to your desired setting. Change the CCT while the fixture is powered on to see the immediate effect. Disconnect power before opening any protective caps.

6.3 Dimming Function (0-10V)

The luminaire is compatible with 0-10V dimming systems. If connected to a compatible 0-10V dimmer, you can adjust the light output intensity. Ensure the purple and gray dimming wires are correctly connected to the dimmer.

6.4 Photo Sensor (Dusk-to-Dawn)

This fixture may include an integrated photo sensor, typically located on the top or side of the housing, which enables automatic dusk-to-dawn operation. Ensure the photo sensor is not obstructed by objects or light from other sources, as this can interfere with its proper function.

7. Pangropéa

Regular maintenance ensures optimal performance and longevity of your flood light.

• beberesih: Periodically clean the lens and exterior housing with a soft, damp cloth. Do not use abrasive cleaners, solvents, or high-pressure water, as these can damage the finish or internal components.
• Pamariksaan: Annually inspect the fixture for any signs of damage, loose wiring, or corrosion. Ensure all mounting hardware remains tight.
• Henteu aya Bagian anu Bisa Dilayanan Pamaké: The LED light source is integrated and not user-replaceable. Do not attempt to open the sealed housing.

8. Cara ngungkulan

If your Sylvania LED Wide Flood Light Luminaire is not functioning correctly, refer to the following common issues and solutions:

Upami léngkah-léngkah ngungkulan henteu ngabéréskeun masalah, hubungi dukungan palanggan LEDVANCE.

9. Spésifikasi

Detailed technical specifications for the Sylvania LED Wide Flood Light Luminaire 15W (Model 61325):

Figure 4: Product Dimensions. This image provides key measurements for the flood light, including a width of 7.40 inches and a height of 9.20 inches with the knuckle mount.

• merek: LEDVANCE
• Jumlah modél: 61325
• Wattage: 15W
• Kaluaran cahaya: 2250 Lumén
• Khasiat: 150 LPW
• Suhu Warna (CCT): 3000K / 4000K / 5000K Tiasa dipilih
• Voltage: 110 volt
• rengse: Perunggu
• Bahan: Bronze (housing), Glass (shade)
• Ukuran produk: 8.1 "L x 7.4" W x 8.1" H
• Jangka waktu hirup: Nepi ka 100,000 jam
• Pamakéan Indoor/Outdoor: Luar
• Tahan cai: Tahan cai
• Pilihan Pasang: Trunnion, 1/2" Knuckle/Slipfitter
• Métode kontrol: Push Button (for CCT selection), 0-10V Dimming compatible

10. Garansi jeung Rojongan

10.1 Émbaran jaminan

This Sylvania LED Wide Flood Light Luminaire is covered by a 1-taun jaminan produsén urang. Garansi ieu nyertakeun cacad dina bahan sareng pagawean dina panggunaan sareng jasa normal. Punten tahan bukti pameseran anjeun pikeun klaim garansi.

10.2 Rojongan Palanggan

For technical assistance, troubleshooting beyond this manual, or to make a warranty claim, please contact LEDVANCE customer support. Refer to the LEDVANCE official websitus atawa bungkusan produk pikeun inpo kontak panganyarna.