SRAM RED D1 Quarq Road Powermeter DUB Instruction Manual

Bubuka

This manual provides essential information for the installation, operation, and maintenance of your SRAM RED D1 Quarq Road Powermeter DUB. Please read this manual thoroughly before using the product to ensure proper function and safety.

The SRAM RED D1 Quarq Road Powermeter DUB is designed for cyclists seeking precise power measurement. It features revolutionary innovation and delivers performance that is simply second to none, helping you achieve the ultimate ride.

Image: The SRAM RED D1 Quarq Road Powermeter DUB crankset, featuring a black finish with silver chainrings and integrated power meter spider.

Émbaran Kasalametan

Always wear appropriate safety gear when working on your bicycle. Ensure all components are installed correctly and torqued to manufacturer specifications. Improper installation can lead to serious injury or product damage. If you are unsure about any installation steps, consult a professional bicycle mechanic.

Setup sareng Instalasi

The SRAM RED D1 Quarq Road Powermeter DUB utilizes the DUB bottom bracket system, which offers broad compatibility across various frame standards. Proper installation of the crankset and bottom bracket is crucial for optimal performance and longevity.

Alat anu diperyogikeun:

• rengkuh torsi
• Appropriate bottom bracket tool (specific to your DUB bottom bracket)
• Konci heksagonal (rupa-rupa ukuran)
• Gajih
• Degreaser

Léngkah-léngkah pamasangan:

1. Nyiapkeun cangkang braket handap: Clean and inspect the bicycle's bottom bracket shell. Ensure threads (if applicable) are clean and free of debris. Apply a thin layer of grease to the bottom bracket threads or contact surfaces as per DUB bottom bracket instructions.
2. Install the DUB Bottom Bracket: Follow the specific instructions provided with your SRAM DUB bottom bracket for installation. Torque to the specified values.
3. Install the Crankset:
   • Apply a thin layer of grease to the DUB spindle.
   • Slide the drive-side crank arm (with chainrings and power meter) through the bottom bracket.
   • Align the non-drive side crank arm onto the spindle.
   • Tighten the crank bolt to the manufacturer's specified torque. Refer to the specific torque values provided with your crankset.
4. Pairing the Powermeter:
   • Ensure the power meter is awake (rotate cranks a few times).
   • Refer to your head unit or cycling computer's manual for instructions on pairing a new ANT+ or Bluetooth power meter.
   • The power meter's unique ID can usually be found on a sticker on the crank arm or spider.

Gambar: A lengkep view of the SRAM RED D1 Quarq Powermeter spider, showing the integrated power measurement unit.

Operating the Powermeter

Once installed and paired, the Quarq power meter will transmit power data to your compatible head unit. Ensure your head unit is configured to display power, cadence, and other relevant metrics.

Calibration (Zero Offset):

It is recommended to perform a zero offset calibration before each ride for the most accurate power readings. This compensates for any changes due to temperature or installation variations.

1. Ensure the bicycle is stationary and the cranks are not under any load.
2. Access the calibration function on your head unit (refer to your head unit's manual).
3. Initiate the zero offset. The head unit will confirm successful calibration.

Catetan: Do not perform a zero offset while pedaling or with any weight on the pedals.

Image: The SRAM RED D1 Quarq Powermeter installed on a bicycle, with a blurred background of cyclists riding, illustrating its intended use.

Pangropéa

Regular maintenance will prolong the life and ensure the accuracy of your SRAM RED D1 Quarq Powermeter.

beberesih:

• Clean the crankset and power meter regularly with mild soap and water.
• Avoid high-pressure washing directly on the power meter unit or bottom bracket bearings.
• Tegalan tuntas sanggeus beberesih.

Ngagantian batré:

The Quarq power meter uses a CR2032 coin cell battery. Battery life varies depending on usage and environmental conditions. Replace the battery when your head unit indicates low battery or when the power meter stops transmitting data.

1. Locate the battery cover on the power meter spider.
2. Use a coin or appropriate tool to open the battery cover by turning it counter-clockwise.
3. Leupaskeun batré heubeul.
4. Insert a new CR2032 battery with the positive (+) side facing outwards.
5. Replace the battery cover and turn clockwise until snug. Do not overtighten.

Pamariksaan Torsi:

Periodically check the crank bolt torque to ensure it remains at the manufacturer's specified setting. Loose crank bolts can lead to creaking or damage.

Pamérésan masalah

spésifikasi

Garansi sareng Rojongan

Produk SRAM ditangtayungan ku garansi kawates ngalawan cacad dina bahan sareng padamelan. Pikeun syarat sareng katangtuan garansi khusus, mangga tingal SRAM resmi. websitus atanapi ngahubungan rojongan customer maranéhanana.

For technical support, troubleshooting beyond this manual, or warranty claims, please visit the official SRAM support page or contact their authorized service centers.

Official SRAM Websitus: www.sram.com