Buku Panduan Panganggo MoesGo WiFi Smart Waterproof Controller

1. Bubuka

The MoesGo WiFi Smart Waterproof Temperature Controller (Model: MS-103) is a versatile device designed for precise temperature and humidity control in various environments. It features dual relay outputs, allowing independent control of two devices, and can be remotely managed via the Smart Life App, Amazon Alexa, and Google Home. Its waterproof temperature probe makes it suitable for applications involving liquids, such as aquariums or brewing.

2. Émbaran Kasalametan

• Always turn off the circuit breaker before performing any wiring or installation procedures to prevent electrical shock.
• The device requires access to a stable power supply for operation.
• Ensure your Wi-Fi network supports 2.4GHz. It is recommended to set different names for your 2.4G and 5G networks.
• For a strong Wi-Fi connection, keep the smart device close to your router.
• Use only English letters and numbers when naming your Wi-Fi router to ensure the Smart Device can recognize it.
• The waterproof temperature probe is designed for water immersion, but it does not measure humidity.

3. Eusi Paket

• MoesGo Temperature and Humidity Smart Switch Module (MS-103)
• Waterproof Temperature Probe
• Temperature and Humidity Probe (Non-waterproof)

Image: MoesGo Smart Temperature and Humidity Switch Module with probes and mobile app.

4. Fitur Produk

• Kontrol Smart WiFi: Remotely manage your devices via the Smart Life App.
• Kaluaran Relay Ganda: Independently control two heating or cooling devices.
• Versatile Probes: Includes a waterproof temperature probe and a non-waterproof temperature and humidity probe.
• Kontrol sora: Cocog sareng Amazon Alexa sareng Google Home pikeun operasi handsfree.
• Sababaraha Modeu: Supports Cooling, Heating, Dehumidifying, and Humidifying modes.
• Timing & Countdown: Set schedules and countdown timers for connected devices.
• Modeu Otomatis: Configure automatic control based on preset temperature and humidity values.
• Saklar Unit Suhu: Easily switch between Fahrenheit (°F) and Celsius (°C) with calibration options.

5. Spésifikasi

Image: Dimensions and probe types for the MoesGo MS-103.

6. Setélan

6.1. Tools Used

• Kawat lempeng
• Electric pen (Voltage Panguji)
• Pita listrik
• Wiring terminal (optional)

Image: Essential tools for installing the MoesGo Smart Switch Module.

6.2. Parentah Wiring

1. Turn off the Circuit Breaker: Before starting any wiring, ensure the power supply to the circuit is completely off.
2. Sambungkeun kawat: Connect the Live (L) and Neutral (N) wires to the corresponding terminals on the module. Connect your two temperature/humidity devices (T&H Device 1 and T&H Device 2) to the L1 and L2 output terminals respectively. The earth wire is optional for wiring.
3. Turn on the Circuit Breaker: Once wiring is complete and secure, turn the circuit breaker back on.

Image: Wiring diagram showing connections for two T&H devices, Live, Neutral, and optional Earth wire.

6.3. Connect with Smart Life App

1. Download the Smart Life App from your mobile app store.
2. Open the app and register or log in.
3. Ensure the blue indicator light on the module is flashing fast, indicating it's in network configuration mode. If not, long press the reset button on the module until it flashes.
4. In the app, tap 'Add Device' or the '+' icon. The app should automatically discover the device. If not, select 'Electrical' > 'Socket (Wi-Fi)' or 'Two-way temperature and humidity switch' manually.
5. Turutan pituduh dina layar pikeun ngarengsekeun prosés papasangan.

6.4. Plug in Probes

After connecting the module to the app, plug in the desired temperature and/or humidity probes into the module's designated ports. The app will detect the data only if the probe is plugged in and the corresponding switch is enabled in the app.

Image: Demonstrating how to plug in the temperature and humidity probes.

7. Parentah Operasi

7.1. App Control Overview

Once connected, the Smart Life App provides comprehensive control over your MoesGo Temperature Controller:

• Kontrol switch: Turn connected devices (Switch 1, Switch 2) on or off independently or simultaneously.
• Temperature/Humidity Display: View real-time temperature and humidity readings from the connected probes.
• Timing & Countdown: Set specific times for devices to turn on/off or activate a countdown.
• Modeu Otomatis: Configure automated control based on temperature and humidity thresholds. For example, set a device to turn on if the temperature goes above a certain value and turn off when it drops below another.
• Unit Suhu: Switch between Celsius (°C) and Fahrenheit (°F) as needed.

Image: App interface demonstrating simultaneous and independent control of two devices.

Image: Setting up automatic temperature and humidity control modes in the app.

8. Pangropéa

To ensure optimal performance and longevity of your MoesGo Smart Temperature Controller:

• Tetep modul beresih jeung bébas tina lebu. Anggo kaén anu garing sareng lembut pikeun beberesih.
• Regularly inspect the probes for any signs of damage or wear.
• For the waterproof probe, ensure its connection point to the module remains dry and secure.
• Avoid exposing the module to extreme temperatures, direct sunlight, or high humidity.

9. Cara ngungkulan

9.1. Masalah Sambungan Wi-Fi

• Device not found during pairing: Ensure your phone is connected to a 2.4GHz Wi-Fi network. Check that your router's 2.4G and 5G networks have different names. Keep the device close to the router during pairing.
• Lampu indikator teu kedip-kedip: Long press the reset button on the module until the blue indicator light flashes rapidly for network configuration.
• Router name issues: Ensure your Wi-Fi router's name (SSID) consists only of English letters and numbers. Special characters may prevent recognition.

9.2. Probe Not Detected / Incorrect Readings

• Ensure the probe is securely plugged into the module.
• Verify that the corresponding switch for the probe is enabled within the Smart Life App.
• Check for any physical damage to the probe or its cable.
• If readings seem inaccurate, use the temperature calibration feature in the app.

9.3. How to Reset / Pair Wi-Fi Code

To reset the device and put it into Wi-Fi pairing mode, long press the reset button on the module until the indicator light flashes rapidly. This will clear previous Wi-Fi settings and allow you to re-pair with the app.

10. Garansi jeung Rojongan

For warranty information, technical support, or further assistance, please refer to the official MoesGo websitus atanapi ngahubungi layanan palangganna sacara langsung. Rincian biasana tiasa dipendakan dina kemasan produk atanapi saluran online resmi produsén.