Bubuka
The Sena Spider ST1 is a Mesh-equipped communication headset designed for motorcyclists, featuring a glove-friendly jog-dial control. It operates on Sena’s Mesh intercom platform, providing robust and reliable rider-to-rider communication. This system includes HD Speakers for enhanced audio quality and is compatible with the Sena Motorcycle App for easy configuration.
Fitur konci:
- Komunikasi Mesh Intercom ngan saukur ku mencét hiji tombol, kalayan jarak efektif dugi ka 5 mil / 8 km.
- Multi-Channel Open Mesh ngamungkinkeun komunikasi sareng jumlah pengendara anu ampir teu aya watesna sareng ngamungkinkeun anjeun ngagentos antara 9 saluran.
- Group Mesh ngadukung dugi ka 24 pamilon dina grup pribadi.
- Speaker HD anu diupgrade dioptimalkeun pikeun kualitas audio, ngahasilkeun paningkatan volume, bass, sareng kajelasan.
- Bluetooth 5.1 connectivity to your smartphone for access to music, phone calls, and GPS navigation.
Naon dina Box
The Sena Spider ST1 Dual Pack includes the following components:
- 2 x Sena Spider ST1 Communication Devices
- 2 x Speaker Sets (HD Speakers)
- 2 x Mikropon Kabel
- 2 x Boom Microphones
- 2 x Universal Helmet Clamps
- 2 x Adhesive Mounts
- 2 x Kabel Ngecas USB
- Various Velcro pads and foam covers for microphones and speakers
Image: All components included in the Sena Spider ST1 Dual Pack, showing the main units, speakers, microphones, and mounting hardware.
Disetél
Proper installation ensures optimal performance and comfort. The Sena Spider ST1 offers flexible mounting options to suit various helmet types.
1. Choosing a Mount:
You have two primary options for mounting the main unit to your helmet:
- Clamp Gunung: This mount slides between the helmet shell and the inner padding. It is generally recommended for helmets with a suitable gap.
- napel Gunung: This mount uses strong 3M adhesive to attach directly to the exterior of your helmet. It is suitable for helmets where the clamp mount may not fit securely or for users who prefer a more permanent attachment.
Ensure the chosen mounting location is flat and clean before applying the adhesive mount.
2. Speaker Installation:
The HD speakers attach to the inside of your helmet using Velcro pads. Identify the ear pockets within your helmet's padding. Clean the area, apply the Velcro pads, and then firmly press the speakers onto the pads. Ensure the speakers are positioned directly over your ears for the best audio experience.
3. Microphone Selection and Placement:
Choose the microphone type that best suits your helmet:
- Mikropon Boom: Ideal for open-face or modular helmets, this microphone extends on a flexible arm. Position it approximately 1-2 cm (0.4-0.8 inches) in front of your mouth.
- Mikropon kabel: Best for full-face helmets, this microphone is smaller and can be discreetly placed inside the helmet's chin bar area using adhesive.
Connect the chosen microphone to the main unit's base. Use the provided microphone sponges to reduce wind noise.
4. Manajemén kabel:
Carefully route all speaker and microphone cables underneath the helmet's padding to prevent discomfort and ensure a tidy installation. Use the provided cable clips or adhesive strips to secure loose wires.
Image: Sena Spider ST1 unit securely mounted on the side of a motorcycle helmet, demonstrating typical installation.
Parentah Operasi
1. Hurung/Pareuman:
- Daya Hurung: Pencét terus tahan Tombol Jog Dial sareng Tombol Telepon sacara babarengan salami 1 detik.
- Pareum listrik: Press and hold the Jog Dial and Phone Button simultaneously for 5 seconds.
2. Volume Control:
Puterkeun Jog Dial searah jarum jam pikeun ningkatkeun volume sareng berlawanan arah jarum jam pikeun ngirangan volume.
3. Phone Pairing:
To pair your Sena Spider ST1 with your smartphone:
- With the unit off, press and hold the Phone Button for 5 seconds until the LED flashes red and blue alternately.
- On your smartphone, go to Bluetooth settings and select