PAUTIX 5V USB CCT Tunable COB LED Strip Light Instruction Manual

1. Bubuka

Thank you for choosing the PAUTIX 5V USB CCT Tunable COB LED Strip Light. This manual provides essential information for the safe and effective use of your new LED strip light. Please read these instructions carefully before installation and operation, and retain them for future reference.

Naon anu aya dina Kotak:

• COB LED Jalur Lampu
• RF Jauh Control

2. Émbaran Kasalametan

• Ensure the power source is 5V DC and provides at least 2A. Using an insufficient power supply may cause the strip to flicker or not function correctly.
• Produk ieu dirancang pikeun pamakéan jero rohangan wungkul. Ulah kakeunaan cai atanapi kalembaban anu luhur.
• Do not bend the LED strip sharply or apply excessive force, as this may damage the internal circuitry.
• Jauhkeun tina jangkauan barudak.
• Do not cover the LED strip with materials that could impede heat dissipation during operation.
• Only cut the LED strip at designated cutting marks.

3. Fitur Produk

• CCT Tunable White: Adjust color temperature from 2700K (warm white) to 6500K (cool white).
• Caang dimmable: 10-level brightness adjustment with stepless dimming via controller buttons.
• RF Remote Control: Control the light strip from up to 15 meters away without direct line of sight.
• Fungsi mémori: The strip light restores to its last brightness and color temperature settings upon power restoration.
• USB Powered: Compatible with any 5V/2A (or higher) USB power source (e.g., TV, computer, power bank).
• CRI luhur: Color Rendering Index (CRI) of 85+ ensures accurate color representation.
• Pamasangan Gampang: Features authentic 3M self-adhesive backing for secure mounting.
• Umur panjang: Designed for over 50,000 hours of operation.

4. Setup jeung Instalasi

Follow these steps for proper installation of your LED strip light:

1. Nyiapkeun permukaan: Ensure the mounting surface is clean, dry, and smooth. Use a clean cloth to wipe away any dust or debris.
2. Ukur sareng Potong (Opsional): If necessary, measure the desired length and cut the LED strip only at the designated cutting marks (indicated by copper pads and a scissor icon). Cutting at other points will damage the strip.
3. Apply the Strip: Peel off the protective film from the 3M adhesive backing. Carefully press the LED strip onto the prepared surface, ensuring firm contact along its entire length.
4. Sambungkeun Kakuatan: Plug the USB connector into a 5V/2A (or higher) USB power source. Common sources include TV USB ports, computer USB ports, power banks, or a 5V USB wall adapter.
5. Daya Hurung: Once connected, the strip light is ready for operation.

Gambar 4.1: Léngkah-léngkah Pamasangan anu Gampang

Figure 4.2: Compatible 5V USB Power Sources

Figure 4.3: Designated Cutting Points on the LED Strip

5. Parentah Operasi

The PAUTIX LED strip light can be controlled using the included RF remote control or the inline button controller.

Fungsi Kontrol Jarak Jauh RF:

Gambar 5.1: Produk Leuwihview with RF Remote

Figure 5.2: RF Remote Control Functionality

• ON/OFF: Press the red button to turn the light on or off.
• Penyesuaian Caang: Use the '+' and '-' buttons to increase or decrease brightness (10 levels).
• Prasetél Suhu Warna: Select from preset color temperatures (e.g., 2700K, 4000K, 6500K) using the dedicated buttons.
• Stepless CCT Adjustment: Use the yellow up/down arrows to fine-tune the color temperature between 2700K and 6500K.
• Fungsi Timer: Set the light to turn off after 30 minutes, 1 hour, 2 hours, or 4 hours using the timer buttons.

The RF remote operates without requiring direct line of sight, allowing control from various angles and distances up to 15 meters.

Figure 5.3: RF Remote 360-Degree Control

Inline Button Controller:

The inline controller on the USB cable also provides basic control:

• Long press the '+' and '-' buttons for stepless dimming (0-100%).
• Short press the buttons to cycle through preset brightness levels or color temperatures.

Figure 5.4: 0-100% Dimmable Functionality

Fungsi mémori:

The light strip retains its last brightness and color temperature settings even after being powered off and on again.

Figure 5.5: Memory Function in Use

6. Pangropéa

• beberesih: Gently wipe the LED strip with a soft, dry cloth to remove dust. Do not use liquid cleaners or abrasive materials.
• Penanganan: Avoid pulling or twisting the strip excessively. Ensure the adhesive remains secure.
• Panyimpenan: Upami nyimpen stripna, pastikeun digulung kalayan leupas sareng disimpen di tempat anu garing, tiis, sareng jauh tina sinar panonpoé langsung.

7. Cara ngungkulan

• Light strip is not turning on:
  • Check if the USB power source is properly connected and functioning.
  • Ensure the USB power source provides at least 5V/2A.
  • Verify that the remote control battery is not depleted.
• Light strip is flickering:
  • This often indicates an insufficient power supply. Ensure your USB device outputs 5V/2A or higher.
  • Pariksa sambungan leupas.
• Kadali jauh henteu ngaréspon:
  • Pasang deui batréna dina remot kontrol RF.
  • Ensure there are no major obstructions blocking the RF signal, although the remote is designed for 360-degree control.
• Light color or brightness is inconsistent:
  • Ensure the strip is not bent too sharply, which can damage internal components.
  • Check for any physical damage to the strip.

8. Spésifikasi

9. Garansi jeung Rojongan

For warranty information or technical support, please contact PAUTIX customer service through the retailer where the product was purchased or visit the official PAUTIX website. Please have your model number (RFCCT-S640COB-USB-2M) and purchase details ready.