Bubuka
Thank you for choosing the Feit Electric LED Outdoor Security Flood Light. This fixture is designed to provide bright, energy-efficient illumination with advanced motion sensing and dusk-to-dawn capabilities for enhanced outdoor security and convenience. Please read this manual thoroughly before installation and operation to ensure proper function and safety.
Gambar: Hareupeun view of the Feit Electric LED Outdoor Security Flood Light, showing its dual adjustable heads and motion sensor.
Émbaran Kasalametan
PERHATOSAN: Risk of electric shock. Disconnect power at the fuse or circuit breaker before installing or servicing. Improper wiring can result in electric shock or fire.
- Sadaya sambungan listrik kedah saluyu sareng standar Kode Listrik (NEC) lokal sareng Nasional.
- Taroskeun ka tukang listrik anu mumpuni upami anjeun henteu yakin ngeunaan prosedur kabel.
- Do not install near combustible materials or in areas with explosive atmospheres.
- Ensure the fixture is securely mounted to a structural surface.
- This fixture is rated for outdoor wet locations (IP65).
Eusi pakét
Pariksa yén sadaya komponén aya sateuacan ngamimitian pamasangan:
- LED Outdoor Security Flood Light Fixture
- Pemasangan Hardware (sekrup, mur kawat)
- Gasket
- Instruksi Manual
Image: The Feit Electric LED Outdoor Security Flood Light, showing the main unit and its components.
spésifikasi
| Fitur | Rincian |
|---|---|
| Nomer modél | S9DFL/850/MOT/WH |
| merek | Feit Listrik |
| Kaluaran cahaya | 2000 Lumén |
| Suhu Warna | 5000K Beurang |
| Wattage | 28 Watt |
| Voltage | 120 volt |
| Sudut Sénsor gerak | 180° |
| Rentang Sénsor gerak | Nepi ka 50 suku |
| Sénsor Magrib-ka-Subuh | terpadu |
| Résistansi Cuaca | IP65 Waterproof Dipeunteun |
| Bahan | Plastic, Polycarbonate Lens |
| Ukuran (L x W x H) | 9" x 5.6" x 7.7" |
| Jangka waktu hirup | 50,000 Jam |
Image: A graphic detailing key specifications of the Feit Electric LED Outdoor Security Flood Light, including wattage, lumens, color temperature, and IP rating.
Parentah instalasi
1. Nyiapkeun Instalasi
- Pareuman kakuatan: Panggihan pemutus sirkuit atanapi kotak sekering teras pareuman daya ka kotak sambungan tempat fixture bakal dipasang.
- Bersihkeun wewengkon: Ensure the installation area is clear of obstructions and provides stable support for the fixture.
2. Pamasangan Fixture
The fixture is designed for wall mounting. Use the provided mounting plate for secure installation.
- Attach the mounting plate to the junction box using the provided screws. Ensure the plate is flush and secure.
- Feed the electrical wires from the junction box through the center hole of the mounting plate.
- Position the fixture against the mounting plate, ensuring the gasket is properly seated to prevent water intrusion.
Image: Illustration of the mounting back plate and screws, demonstrating the hands-free wiring design for easier installation.
3. Sambungan Wiring
Connect the fixture wires to the household wiring using the provided wire nuts:
- Nyambungkeun hideung kawat ti fixture kana hideung (live) wire from the junction box.
- Nyambungkeun bodas kawat ti fixture kana bodas kawat (nétral) tina kotak sambungan.
- Nyambungkeun hejo (taneuh) kawat ti fixture kana hejo or bare copper (ground) wire from the junction box.
- Pastikeun sadaya sambungan aman sareng diisolasi ku mur kawat.
4. Secure the Fixture
Once wiring is complete, align the fixture with the mounting plate and secure it using the provided screws. Ensure a tight seal to maintain the IP65 waterproof rating.
Gambar: Sisi view of the flood light, illustrating the adjustable light heads and motion sensor for optimal positioning.
Parentah Operasi
1. Power On and Initial Test
After installation, restore power at the circuit breaker. The light may cycle on and off briefly as it calibrates.
2. Fungsi Sénsor gerak
The integrated motion sensor detects movement within a 180° wide sensing angle and up to 50 feet away. When motion is detected, the light will turn on automatically. The duration the light stays on after motion ceases is typically adjustable (refer to specific model controls if available, usually a dial on the sensor itself).
Image: Diagram illustrating the wide-beam optics and motion sensor detection range, showing coverage up to 50 feet.
3. Dusk-to-Dawn Functionality
The built-in light sensor automatically detects ambient light levels. The fixture will activate at dusk and deactivate at dawn, ensuring illumination only when needed. This feature works in conjunction with the motion sensor, meaning the motion sensor will only be active during nighttime hours.
Image: Visual representation of the dusk-to-dawn sensor, showing the light activating as ambient light decreases and deactivating as it increases.
4. Adjusting Light Heads and Sensor
The two LED light heads and the motion sensor are adjustable. Carefully pivot them to direct light and motion detection to your desired areas. Do not overtighten adjustment screws.
Pangropéa
- beberesih: Ensure power is off before cleaning. Wipe the fixture with a soft, damp lawon. Ulah make cleaners abrasive atawa pangleyur, sabab bisa ngaruksak finish atawa komponén listrik.
- Pamariksaan: Periodically inspect the fixture for any signs of damage, loose wiring, or wear.
- LEDs: LED anu terintegrasi dirancang pikeun umur anu panjang sareng henteu tiasa digentos ku pangguna.
Image: The Feit Electric flood light shown in a rainy environment, emphasizing its IP65 wet-rated and weather-resistant construction.
Pamérésan masalah
| Masalah | Mungkin Cukang lantaranana | Solusi |
|---|---|---|
| Lampu henteu hurung. | Taya kakuatan, kabel leupas, sensor faulty. | Check circuit breaker. Verify all wiring connections. Ensure sensor is not obstructed. |
| Lampu terus hurung. | Constant motion detected, sensor sensitivity too high, dusk-to-dawn sensor malfunction. | Check for continuous motion in sensor's field of view. Adjust sensor sensitivity. Ensure no ambient light is interfering with the dusk-to-dawn sensor. |
| Lampu hurung beurang. | Dusk-to-dawn sensor obstructed or malfunctioning. | Ensure the dusk-to-dawn sensor is not covered or in a shaded area that mimics nighttime conditions. |
| Rentang sensor gerak kirang. | Sensor obstructed, incorrect angle, environmental factors. | Clear obstructions. Adjust sensor angle. Avoid placing near heat sources or reflective surfaces. |
Garansi
Produk Feit Electric ieu dijamin bébas tina cacad dina padamelan sareng bahan pikeun 5 taun from the date of purchase. If the product fails within the warranty period, please contact Feit Electric for replacement or refund. This warranty expressly excludes incidental and consequential damages.
Ngarojong
For technical assistance or further inquiries, please visit the official Feit Electric website or contact their customer support. Refer to the product packaging or the Feit Electric websitus pikeun inpo kontak panganyarna.
Feit Listrik Websitus: www.feit.com
