ULANZI R099 Super Clamp Camera Mount with 360° Ballhead Instruction Manual

Bubuka

The ULANZI R099 Super Clamp Camera Mount is a versatile accessory designed to securely attach cameras, action cameras, phones, and other photographic equipment to various surfaces. Featuring a robust super clamp and a 360° rotating ball head, it offers flexible positioning and stable support for your creative needs.

Figure 1: ULANZI R099 Super Clamp Camera Mount with 360° Ballhead.

Fitur produk

• Super Clamp Desain: Quickly attaches to tubes ranging from 0.51 to 2.36 inches (13 to 60mm) in diameter.
• Kapasitas Beban Tinggi: Supports a maximum load of 3.3 lb (1.5KG), suitable for various cameras and accessories.
• Hulu Bal 360°: Allows for full 360° rotation and horizontal turning, enabling precise angle adjustments for both portrait and landscape modes. Features a quick-lock knob for secure positioning.
• Sekrup Universal 1/4": Equipped with a standard 1/4" screw for compatibility with monitors, action cameras, DSLRs, LED lights, microphones, flashes, and more.
• Konstruksi awét: Made from sturdy Aluminum Alloy with a precise CNC anodized process, ensuring solid and robust performance.
• Pad karét pelindung: Features dense rubber pads on the clamp area to prevent scratches and enhance grip on mounted surfaces.

angka 2: Tutup-up view of the ULANZI R099 clamp showing anti-slip pads and one-piece connection for enhanced stability.

Eusi pakét

• Super Clamp with 360° Ballhead (x1)
• GoPro Adapter (x1)

Setup & Pamasangan

1. Attaching the Super Clamp

1. Identify a suitable mounting surface such as a bike handlebar, pole, tripod leg, or crossbar. Ensure the surface diameter is between 0.51 to 2.36 inches (13 to 60mm).
2. Unscrew the large knob on the side of the super clamp pikeun muka rahang.
3. Posisi clamp around the desired surface.
4. Tighten the knob firmly until the clamp is securely fastened and does not move. The internal rubber pads will help prevent slippage and protect the surface.

Figure 3: The ULANZI R099 Super Clamp securely attached to a bike handlebar, ready for action camera use.

2. Attaching Your Device to the Ball Head

1. Locate the 1/4" screw on top of the ball head.
2. Screw your camera, monitor, LED light, or other compatible device onto the 1/4" screw until it is finger-tight.
3. If using a GoPro or similar action camera, attach the provided GoPro adapter to the 1/4" screw first, then mount your action camera to the adapter.

Figure 4: The 1/4" screw on the ball head allows for attachment of cameras, monitors, and video lights.

Parentah Operasi

Nyaluyukeun Kepala Bola

1. To adjust the angle of your mounted device, loosen the small knob located on the side of the ball head.
2. Rotate the ball head 360° or tilt it to achieve the desired angle (up to 90° tilt).
3. Once the desired position is achieved, tighten the knob firmly to lock the ball head in place.

Figure 5: The 360° rotating ball head allows for versatile camera positioning.

Kasaluyuan

The ULANZI R099 Super Clamp is designed for wide compatibility with various devices and mounting surfaces:

• Alat anu cocog: Insta360 One X2, GoPro Hero9 Black, AKASO Brave 7 LE, DJI Osmo Action, DSLRs, LED Lights, Microphones, Flashes, and other devices with a 1/4" screw mount.
• Permukaan dipasang: Bike/Bicycle/Motorcycle Handlebars, Poles, Tripod Tubes, Crossbars, Gimbal Rods, Desktops, Railings, Tree Branches, and any tube-shaped object with a diameter between 0.51 to 2.36 inches (13 to 60mm).

Gambar 6: Kelamples of the ULANZI R099 Super Clamp's wide compatibility across different mounting scenarios.

Pangropéa

• Tetep clamp clean and free from dust and debris. Use a soft, dry cloth for cleaning.
• Periodically check all screws and knobs to ensure they are tight and secure.
• Ulah over-tightening cl nuamp or ball head, as this may cause damage to the product or the mounted surface.
• Simpen clamp in a dry place when not in use to prevent corrosion.

Pamérésan masalah

• Clamp is slipping: Ensure the mounting surface diameter is within the specified range (0.51 to 2.36 inches). Tighten the main knob firmly. The rubber pads should provide sufficient grip; ensure they are clean and intact.
• Ball head is not holding position: Fully tighten the small knob on the side of the ball head. If the issue persists, ensure the weight of the mounted device does not exceed the maximum load capacity of 3.3 lb (1.5KG).
• Alatna karasa teu stabil: Verify that both the super clamp and the ball head knob are tightened securely. Ensure the device is properly screwed onto the 1/4" mount.

spésifikasi

Garansi & Rojongan

For warranty information, technical support, or any inquiries regarding your ULANZI R099 Super Clamp Camera Mount, please refer to the official ULANZI websitus atanapi ngahubungan layanan palanggan maranéhanana langsung. Simpen resi pameseran anjeun pikeun klaim jaminan.