IXTECH Home Keyless Entry Door Lock Deadbolt with Handle

Bubuka

This manual provides detailed instructions for the installation, operation, maintenance, and troubleshooting of your IXTECH Home Keyless Entry Door Lock Deadbolt with Handle, Model IX-THI01. Please read this manual thoroughly before installation and use to ensure proper function and security.

Naon Kaasup

Pariksa yén sadaya komponén aya sateuacan ngamimitian pamasangan:

• Majelis Keypad Exterior
• Majelis interior
• Kancing Deadbolt
• Handle Pull Assembly (Exterior)
• Lever Handle (Interior)
• Piring neunggeul
• Lempeng Pamasangan
• Mounting Hardware (screws, spindle, reset tool)
• Konci (2)

Image: All components included in the IXTECH door lock package.

spésifikasi

Setup & Pamasangan

The IXTECH keyless entry door lock is designed for easy installation on standard right and left-hand front doors. Follow these steps carefully:

1. Nyiapkeun lawang: Ensure your door has standard bore holes. If replacing an existing lock, remove the old hardware.
2. Pasang Latch: Insert the deadbolt latch into the door edge. Ensure the latch is oriented correctly for your door's swing. Secure with screws.
3. Pasang Majelis Luar: Place the exterior keypad assembly onto the door, aligning the spindle through the latch.
4. Pasang Plat Pemasangan: Position the interior mounting plate over the spindle and secure it to the exterior assembly with screws.
5. Sambungkeun kawat: Sambungkeun kawat harness tina rakitan luar ka rakitan jero.
6. Pasang Majelis Interior: Attach the interior assembly to the mounting plate, ensuring the thumb turn aligns with the deadbolt mechanism. Secure with screws.
7. Install Handle Pull: Attach the exterior handle pull and interior lever handle, securing them with the provided hardware.
8. Pasang Strike Plate: Install the strike plate on the door frame, aligning it with the deadbolt latch.
9. Selapkeun Batré: Open the battery cover on the interior assembly and insert 4 AA batteries.
10. Perform Handing Process (Crucial): With the door open and unlocked, load 3 AA batteries. Press and hold the RESET button on the interior assembly using the RESET tool. Load the last battery and keep holding the RESET button for 3 seconds until you hear a long "beep". The latch bolt will extend to learn the orientation of the door.

Image: Illustration of the installation process for the IXTECH door lock.

Parentah Operasi

The default master code is 12345678. It is recommended to change this code immediately after installation.

1. Robah Kodeu Master:
   Pencét IXtech twice → Enter Kodeu Master → Pencét IXtech once → Wait for long green light → Press 1 → Wait for green flash → Enter Kodeu Master Anyar → Pencét IXtech once → Wait for green flash.
2. Tambahkeun Kodeu Pamaké:
   Pencét IXtech twice → Enter Kodeu Master → Pencét IXtech once → Wait for long green light → Press 2 → Wait for green flash → Enter Kodeu Pamaké Anyar → Pencét IXtech once → Wait for green flash.
3. Hapus Kodeu Pamaké:
   Pencét IXtech twice → Enter Kodeu Master → Pencét IXtech once → Wait for long green light → Press 3 → Wait for green flash → Enter Kodeu Pamaké anu teu dihoyongkeun → Pencét IXtech once → Wait for green flash.
4. Modeu Silent:
   Pencét IXtech twice → Enter Kodeu Master → Pencét IXtech once → Wait for long green light → Press 4 → Wait for green flash → Press 1 pikeun ngaktipkeun atawa 2 to disable → Press IXtech once → Wait for green flash.
5. Konci Otomatis:
   Pencét IXtech twice → Enter Kodeu Master → Pencét IXtech once → Wait for long green light → Press 5 → Wait for green flash → Press 1 pikeun ngaktipkeun atawa 2 to disable → Press IXtech once → Wait for green flash.
6. Set Auto-Lock Time Delay (10-99 seconds):
   Pencét IXtech twice → Enter Kodeu Master → Pencét IXtech once → Wait for long green light → Press 8 → Wait for green flash → Enter Duration (10-99) → Pencét IXtech once → Wait for green flash.
7. Tambahkeun Kode Hiji-waktos:
   Pencét IXtech twice → Enter Kodeu Master → Pencét IXtech once → Wait for long green light → Press 7 → Wait for green flash → Enter Kode Hiji-Time → Pencét IXtech once → Wait for green flash.
8. Mode libur:
   Pencét IXtech twice → Enter Kodeu Master → Pencét IXtech once → Wait for long green light → Press 6 → Wait for green flash → Press IXtech once → Wait for green flash. (Only the master code will unlock the door in this mode).

Fitur konci

• Electronic Keypad: Allows keyless entry with customizable codes.
• Heavy-Duty Deadbolt: Provides an additional layer of security.
• Customizable Entry Codes: Supports up to 6 different permanent or temporary user codes.
• Selesai Perunggu Digosok Minyak: A decorative finish suitable for various door styles.
• Résistansi Cuaca: Designed to withstand temperatures from -22°F to 158°F and features an IP54 waterproof rating.
• Sandi Anti-Ngintip: Allows entry of random digits before or after your actual code to prevent unauthorized viewing.
• Waspada Batré Lemah: An indicator light notifies you when batteries need replacement.

Image: Weather resistance features of the IXTECH door lock.

Pangropéa

• Ngagantian batré: The lock requires 4 AA batteries. Replace all batteries when the low battery indicator illuminates. Use high-quality alkaline batteries for optimal performance.
• beberesih: Clean the keypad and exterior surfaces with a soft, damp lawon. Hindarkeun cleaners abrasive atawa pangleyur nu bisa ngaruksak finish atawa komponén éléktronik.

Pamérésan masalah

• Konci Teu Ngabales: Check battery levels and replace if necessary. Ensure the wire harness connection is secure.
• Kodeu Teu Gawé: Verify that the correct master code and user codes are being entered. Ensure the handing process was completed correctly after installation. If issues persist, perform a factory reset and reprogram all codes.
• Stiff Interior Lever: If the interior lever feels stiff after locking from the outside, it may indicate a slight misalignment or friction. Ensure all screws are tightened appropriately and the latch operates smoothly.
• Keypad Teu Nyala: Check battery levels. If batteries are new, ensure they are inserted with correct polarity.
• Lock Mechanism Not Engaging/Disengaging: Ensure the deadbolt latch is installed correctly and moves freely. Check for any obstructions in the door frame or strike plate.

Garansi & Rojongan

The IXTECH Home Keyless Entry Door Lock Deadbolt with Handle comes with a 12-garansi sasih ti tanggal dibeuli, ngawengku defects manufaktur sarta malfunctions dina pamakéan normal.

For technical assistance, troubleshooting, or warranty claims, please contact IXTECH customer support. Refer to the product packaging or the official IXTECH websitus pikeun inpo kontak panganyarna.