aurora Y2T Yale Rim Lock Instruction Manual

1. Produk Langkungview

The aurora Y2T Yale Rim Lock is a modern style front door night latch designed for enhanced security. It features a 5-pin cylinder, key operation from the outside, and a lever handle with a snib function for internal control. This lock is suitable for various door thicknesses and comes in a satin nickel and antique plated finish.

Fitur konci:

• Modern style front door night latch.
• Includes a 5-pin cylinder and 2 keys.
• Satin nickel and antique plated finish with rim cylinder.
• Key operation for external access.
• Lever handle operation for internal access.
• Snib function to hold the latch back.
• Adjustable backset and suitable for door thicknesses between 35mm and 60mm.

2. Eusi Paket

Pariksa yén sadaya komponén aya sateuacan ngamimitian pamasangan.

• 1 x aurora Y2T Yale Rim Lock body
• 1 x Rim cylinder
• 2 x konci
• Mounting screws and fixings

Image: Product packaging for the aurora Y2T Yale Rim Lock, showing the lock body and Yale branding.

3. Diménsi Produk

Understanding the dimensions is crucial for proper installation and compatibility with your door.

• Overall Lock Dimensions (L x W x H): 10.2 x 10.2 x 6.4 Centimeters (approximately 101.6 x 101.6 x 63.5 mm)
• Lebar Kasus: 93 mm
• Jangkungna kasus: 66 mm
• Panjang Bolt: 13 mm
• Backset: 60 mm
• Ketebalan Panto Maksimum: 35-60mm
• Diaméter silinder: Ø 30 mm
• Mounting Support Thickness: 13 nepi ka 17 mm

Image: Detailed dimensions of the aurora Y2T Yale Rim Lock body, showing measurements for length, width, and bolt extension.

Image: Diagram illustrating the cylinder diameter and compatible door thickness range (30mm to 60mm) for the aurora Y2T Yale Rim Lock.

4. Pituduh Pamasangan (Setup)

This section provides general instructions for installing the aurora Y2T Yale Rim Lock. Professional installation is recommended if you are unfamiliar with door hardware installation.

Alat anu diperyogikeun:

• Bor
• Wood drill bits (appropriate sizes for cylinder and screws)
• Obeng (sirah Philips)
• Pita ukur atawa penggaris
• Pensil
• Chisel (optional, for flush fitting)

Léngkah-léngkah pamasangan:

1. Nyiapkeun lawang:

   Determine the desired position for the lock on the inside of the door. Mark the center point for the rim cylinder hole, ensuring it aligns with the backset measurement (typically 60mm from the door edge). The lock body should be positioned to allow the bolt to extend into the door frame.
2. Drill Cylinder Hole:

   Using an appropriate drill bit (e.g., Ø30mm), drill a hole through the door at the marked center point for the rim cylinder. Ensure the hole is straight and clean.

3. Install Rim Cylinder:

   Insert the rim cylinder through the drilled hole from the outside of the door. Secure it to the lock body on the inside using the provided screws or fixing plate. Ensure the cylinder is flush with the door surface on the outside.

4. Position Lock Body:

   Place the main lock body onto the door, aligning it with the rim cylinder. The spindle from the cylinder should engage with the lock mechanism. Mark the positions for the mounting screws.
5. Mount Lock Body:

   Drill pilot holes for the mounting screws. Secure the lock body to the door using the provided screws. Ensure the lock is level and firmly attached.

6. Install Striker Plate:

   Close the door and mark the position where the lock bolt meets the door frame. Open the door and install the striker plate on the door frame, ensuring it aligns perfectly with the bolt when the door is closed. Drill pilot holes and secure the striker plate with screws.

7. Operasi tés:

   Test the lock's operation with the key from the outside and the lever handle/snib from the inside. Ensure smooth locking and unlocking without binding.

5. Parentah Operasi

The aurora Y2T Yale Rim Lock offers straightforward operation for securing your door.

Ngonci panto:

• Ti Luar: Insert the key into the rim cylinder and turn it to extend the bolt into the striker plate on the door frame. Remove the key.
• Ti Jero: Close the door. Turn the internal lever handle to extend the bolt.

Muka konci panto:

• Ti Luar: Insert the key into the rim cylinder and turn it to retract the bolt. Turn the door handle to open the door.
• Ti Jero: Turn the internal lever handle to retract the bolt. The door can then be opened.

Using the Snib Function:

The snib function allows the latch to be held back, preventing it from automatically locking when the door closes. This is useful for temporary access or when you want the door to remain unlocked.

• To engage the snib, retract the bolt using the internal lever handle and then slide the snib mechanism (usually a small switch or button) to the 'hold open' position.
• To disengage, slide the snib back to its original position. The lock will then function normally.

6. Pangropéa

Regular maintenance ensures the longevity and smooth operation of your rim lock.

• beberesih: Wipe the lock body and cylinder with a soft, damp lawon. Hindarkeun pembersih atanapi pangleyur anu abrasif, anu tiasa ngaruksak lapisan akhir.
• Lubrication: Periodically apply a small amount of graphite-based lubricant or a specialized lock lubricant into the keyway of the cylinder. Do not use oil-based lubricants, as they can attract dust and grime.
• Pariksa screws: Periodically check all mounting screws for tightness. Tighten any loose screws to prevent wobbling or misalignment.
• Pariksa keur maké: Examine the bolt and striker plate for signs of wear or damage. If excessive wear is present, consider replacement of components or professional servicing.

7. Cara ngungkulan

If you encounter issues with your aurora Y2T Yale Rim Lock, refer to the following common problems and solutions:

• Key is difficult to turn or sticky:

  Apply graphite lubricant to the key and insert it into the cylinder several times. Ensure the key is fully inserted. Check for any debris in the keyway.

• Bolt does not extend or retract smoothly:

  Check if the lock body or striker plate is misaligned. Ensure all mounting screws are tight. Lubricate the internal mechanism if accessible, or the bolt itself where it slides.

• Door does not close properly with the lock engaged:

  Verify that the striker plate on the door frame is correctly aligned with the bolt. Adjust the striker plate if necessary. Check for any obstructions in the door frame or door itself.
• Snib function is not working:

  Ensure the snib mechanism is clean and free from debris. If it feels stiff, a small amount of lubricant might help. If it's broken, the lock may require professional repair or replacement.

If these steps do not resolve the issue, contact customer support or a qualified locksmith.

8. Spésifikasi Téknis

9. Garansi jeung Rojongan

Specific warranty information for the aurora Y2T Yale Rim Lock may vary by region and retailer. Please refer to your purchase documentation or the manufacturer's official websitus pikeun istilah jeung kaayaan jaminan lengkep.

Rojongan Palanggan:

For technical assistance, troubleshooting not covered in this manual, or warranty claims, please contact aurora customer support through their official channels. Keep your purchase receipt and product model number (Y2T) readily available when contacting support.

Pabrikan: AsaAbloy

merek: aurora