AVANTEK Mini Waterproof Wireless Doorbell Chime User Manual

1. Bubuka jeung Leuwihview

This manual provides comprehensive instructions for the installation, operation, and maintenance of your AVANTEK Mini Waterproof Wireless Doorbell Chime. This system is designed to provide reliable notification of visitors with its long wireless range, customizable melodies, and durable, waterproof design.

Key features include a 1000 ft (300 m) ultra-long wireless range, 52 selectable melodies, 5 adjustable volume levels up to 115 dB, and an IP55 dustproof and waterproof rating for the transmitter.

Image 1: The AVANTEK Mini Waterproof Wireless Doorbell Chime system, showing two black plug-in receivers and two black push-button transmitters. Each unit features a green LED indicator and a bell icon.

2. Eusi Paket

Punten parios yén sadaya barang anu didaptarkeun di handap kalebet kana pakét anjeun:

• 2 x Panarima Colokkeun
• 2 x Push-button Transmitters
• 4 x sekrup
• 4 x Jangkar Tembok
• 1 x Mini Screwdriver (for battery compartment)
• 2 x Double-sided Adhesive Pads
• 1 x CR2032 Lithium Battery (pre-installed in each transmitter)

3. Setup jeung Instalasi

The AVANTEK wireless doorbell system offers flexible installation options for the transmitter. Ensure the receiver is plugged into a standard electrical outlet within the wireless range of the transmitter.

3.1 Pamasangan pamancar

Aya dua cara pikeun masang pemancar:

Image 2: Visual guide for installing the doorbell transmitter. Solution A demonstrates using a double-sided adhesive pad, while Solution B illustrates mounting with screws and wall anchors.

Solution A: Using the Double-Sided Adhesive Pad

1. Clean the desired mounting surface thoroughly to ensure it is free of dust and grease.
2. Peel off one side of the protective film from the double-sided adhesive pad and firmly attach it to the back of the transmitter.
3. Kelupaskeun sisi séjén tina pilem pelindung teras pencét pemancar pageuh kana permukaan anu parantos dibersihkeun sahenteuna 30 detik.

Solution B: Using Screws and Anchors

1. Buka pemancar casing using the provided mini screwdriver to access the mounting holes.
2. Mark the positions for drilling on the wall using the transmitter's mounting holes as a guide.
3. Drill two holes at the marked positions. Insert the wall anchors into the drilled holes.
4. Align the transmitter with the anchors and secure it to the wall using the provided screws.
5. Tutupkeun pamancar casing aman.

For optimal performance, mount the transmitter at a height of approximately 3-5 feet (1-1.5 meters) from the ground.

3.2 Receiver Placement

Plug the receiver into any standard indoor electrical outlet. For best results, avoid placing the receiver near large metal objects, thick walls, or other electronic devices that may cause interference.

Image 3: An illustration of a house demonstrating the placement of multiple doorbell transmitters and receivers to ensure comprehensive coverage across different entry points and rooms.

4. Parentah Operasi

4.1 Ngarobah Melodi

Panarima nawiskeun 52 melodi anu béda. Pikeun ngarobih melodi:

1. Press the "Forward" or "Backward" button on the side of the receiver to cycle through the available melodies.
2. Once you hear a melody you like, stop pressing the button. The receiver will automatically save this melody.

Image 4: A visual representation of the doorbell receiver's features, highlighting 52 available chimes and tunes, 5 adjustable volume levels, and an LED indicator for visual alerts.

4.2 Nyaluyukeun Tingkat Volume

The receiver has 5 adjustable volume levels, ranging from silent (mute) to 115 dB.

1. Press the "Volume" button on the side of the receiver repeatedly to cycle through the 5 volume levels.
2. The LED indicator will flash to confirm the selected volume level.
3. One of the volume levels is a mute mode, where only the LED indicator will flash without sound.

Image 5: An illustration detailing the silent LED notification mode and the five adjustable volume levels (0-115 dB) of the doorbell receiver, with examples of typical sound environments for each level.

4.3 Pairing Additional Transmitters/Receivers (Optional)

If you purchase additional AVANTEK Mini transmitters or receivers, you can pair them with your existing system.

1. Colokkeun panarima.
2. Press and hold the "Volume" button on the receiver for approximately 5 seconds until the LED indicator flashes rapidly. This indicates pairing mode.
3. Immediately press the push-button on the new transmitter. The receiver will chime, and its LED will flash slowly, indicating successful pairing.
4. To set a different ringtone for each transmitter, select the desired melody on the receiver first, then follow the pairing steps for that specific transmitter.

5. Pangropéa

5.1 Transmitter Battery Replacement

The transmitter uses a CR2032 lithium battery with an estimated lifespan of up to 3 years. When the transmitter's LED indicator no longer lights up or the range decreases significantly, it's time to replace the battery.

1. Taliti muka pamancar casing using the provided mini screwdriver.
2. Leupaskeun batré CR2032 heubeul.
3. Selapkeun batré CR2032 anyar kalayan sisi positif (+) nyanghareup ka luhur.
4. Tutupkeun pamancar casing aman.

Image 6: The doorbell transmitter alongside a graphic illustrating the CR2032 battery and its impressive 3-year lifespan, emphasizing long-term reliability.

5.2 beberesih

Wipe the doorbell units with a soft, dry cloth. Do not use abrasive cleaners or solvents. The transmitter is IP55 rated, meaning it is protected against dust ingress and low-pressure water jets, but it should not be submerged in water.

6. Cara ngungkulan

7. Spésifikasi

• Jangkauan nirkabel: Up to 1000 ft (300 m) in open air
• Melodi: 52 lonceng anu tiasa dipilih
• Tingkat volume: 5 tingkat (0 dB dugi ka 115 dB)
• Batré pamancar: 1 x CR2032 Lithium Battery (approx. 3-year lifespan)
• Rating Tahan Cai (Pemancar): IP55 (Dustproof and Water-resistant)
• Suhu operasi: -4°F nepi ka 140°F (-20°C nepi ka 60°C)
• Sertifikasi: FCC, CE, RoHS
• model: AVANTEK Mini Waterproof Wireless Doorbell Chime
• ASIN: B09XTZ8ZY1

Image 7: An illustration depicting the AVANTEK doorbell system's impressive 1000 ft (300 m) ultra-long wireless range, showing a transmitter outside and a receiver inside a multi-room house.

Image 8: The doorbell transmitter shown with water droplets, emphasizing its IP55 dustproof and waterproof capabilities, along with its wide operating temperature range of -4°F to 140°F (-20°C to 60°C).

8. Garansi jeung Rojongan

AVANTEK is committed to providing high-quality products and customer satisfaction. This wireless doorbell system is approved by FCC, CE, and RoHS standards, ensuring its quality and safety.

For any questions, concerns, or support needs, please contact AVANTEK customer service. We are dedicated to assisting you and will always strive to provide the best possible support.

For more information or to contact support, please visit the official AVANTEK store: AVANTEK Store on Amazon.