Bubuka
This manual provides comprehensive instructions for the installation, operation, and maintenance of your DS18 ZXI6.4D 6.5-inch High Excursion Car Audio Subwoofer. This product is engineered to deliver powerful and clear bass, enhancing the audio experience in your vehicle. Please read this manual thoroughly before installation and use to ensure proper functionality and longevity of your subwoofer.
Émbaran Kasalametan
- Always disconnect the vehicle's battery before performing any electrical work or installation to prevent electrical shock or damage.
- Pastikeun sadaya sambungan kabel aman sareng diisolasi kalayan leres pikeun nyegah korsleting sareng bahaya kahuruan.
- Use appropriate gauge wiring for power and speaker connections as recommended by audio professionals to handle the subwoofer's power requirements.
- Avoid installing the subwoofer in locations where it may obstruct vehicle operation, driver visibility, or safety devices.
- Prolonged exposure to high volume levels can cause permanent hearing damage. Operate your audio system responsibly.
- Do not expose the subwoofer to excessive moisture, direct sunlight, or extreme temperatures.
Eusi pakét
Pastikeun yén sadaya item aya dina bungkusan:
- DS18 ZXI6.4D 6.5-inch High Excursion Car Audio Subwoofer (1 unit)
Produk Leuwihview
Gambar 1: Hareupeun view of the DS18 ZXI6.4D 6.5-inch High Excursion Subwoofer, showcasing its robust design and foam surround.
Gambar 2: Visual representation of the subwoofer highlighting key features such as 600W MAX Power, 4+4 Ohms Impedance, and 6.5-inch size.
Gambar 3: Image detailing the strong stamped basket design and performance specifications like Frequency Response (35Hz-1.8KHz), Sensitivity (87dB), and Magnet size (80 Oz).
Gambar 4: Pahareup-hareup view illustrating the 1.5-inch voice coil, mounting depth (5.78"), magnet weight (80 Oz), and XMAX (18mm one way).
spésifikasi
The following table outlines the technical specifications for the DS18 ZXI6.4D Subwoofer:
| Fitur | Spésifikasi |
|---|---|
| Ngaran modél | ZXI6.4D |
| Tipe Speaker | Subwoofer |
| Diaméter Subwoofer | 6.5 inci |
| Penanganan Daya Max | 600 Watt |
| Impedansi | Ganda 4 Ohm |
| Diaméterna Coil Sora | 1.5 inci |
| Bahan | Foam, Aluminum |
| Fitur husus | High Excursion |
| Dianjurkeun Mangpaat | Bass, Car Audio |
| Alat nu cocog | Car Stereo, In-dash Receiver |
| Dimensi produk | 5.33 "D x 6.93" W x 6.93" H |
| Pamasangan Jerona | 4.41" / 112mm |
| Gemblengna diaméterna | 6.93" / 176mm |
| Potongan Baffle Pemasangan Hareup | 5.78" / 146.8mm |
| Item Beurat | 4.26 Kilogram (9.37 pon) |
| Nyaéta Waterproof | No |
| Téhnologi konektipitas | Dikabel |
| UPC | 810097260337 |
Gambar 5: Diagram showing the overall dimensions of the subwoofer, including height and width.
Gambar 6: Detailed diagram illustrating mounting depth, overall diameter, and front mount baffle cut-out dimensions for installation planning.
Setup sareng Instalasi
Pamasangan anu leres penting pisan pikeun kinerja sareng kaamanan anu optimal. Upami anjeun teu yakin kana léngkah-léngkah naon waé, konsultasi ka installer audio mobil profésional.
- Perencanaan pamasangan:
- Choose a suitable mounting location within your vehicle that allows for adequate air circulation and does not interfere with vehicle components or safety features.
- Determine the type of enclosure (sealed or ported) that best suits your desired bass response and available space. Refer to enclosure design guidelines for optimal performance.
- Sambungan Wiring:
- The ZXI6.4D features a dual 4-ohm voice coil. This allows for various wiring configurations to achieve different final impedances (e.g., 2-ohm or 8-ohm) depending on your amplifier's capabilities and stability.
- Sambungkeun subwoofer ka cocog amplifier using appropriate gauge speaker wire. Ensure correct polarity (+ to + and - to -) for all connections to prevent phase issues.
- For dual voice coil wiring, consult your amplifier's manual or a wiring diagram for series or parallel configurations to match the ampsarat impedansi liifier.
- Pasang Subwoofer:
- Securely mount the subwoofer into its chosen enclosure or mounting location using appropriate fasteners. Ensure the mounting surface is rigid and free from vibrations.
- Verify that there is sufficient clearance for the subwoofer's excursion, especially for high excursion models like the ZXI6.4D.
- Sambungan Daya sareng Taneuh:
- Nyambungkeun amplifier's power input directly to the vehicle's battery using a fused power cable. The fuse should be located within 18 inches of the battery.
- Nyambungkeun amplifier's ground terminal to a clean, unpainted metal surface on the vehicle chassis, ensuring a solid electrical connection.
- Initial System Test:
- Before full operation, set your amplifier's gain to its minimum setting and your head unit's volume to a low level.
- Play a familiar audio track and gradually increase the volume and amplifier gain, listening for clear, undistorted bass.
- Check all connections for warmth or unusual smells, which could indicate a problem.
Parentah Operasi
Once the subwoofer is installed and tested, fine-tuning your audio system will optimize its performance:
- AmpSetélan Lifier: Saluyukeun kontrol gain on Anjeun amplifier pikeun cocog kaluaran voltage Unit sirah anjeun. Ulah nyetel gain teuing tinggi, sabab ieu bisa ngakibatkeun distorsi jeung karuksakan poténsial.
- Setélan Crossover: Paké low-pass filter (LPF) on Anjeun amplifier or head unit to send only low frequencies to the subwoofer. A common starting point is between 80Hz and 120Hz, but this can be adjusted based on your vehicle's acoustics and personal preference.
- Kontrol Fase: Upami anjeun amplifier has a phase switch (0° or 180°), experiment with both settings to determine which provides the most impactful and cohesive bass response with your front speakers.
- Nguatkeun Bass: Use bass boost sparingly, if at all. Excessive bass boost can cause distortion and potentially damage the subwoofer.
- Tingkat Dengekeun: Operate the subwoofer within its rated power handling. If you hear distortion, reduce the volume or gain immediately.
Pangropéa
To ensure the longevity and performance of your DS18 ZXI6.4D subwoofer, follow these simple maintenance guidelines:
- Inspeksi rutin: Pariksa sacara berkala sadaya sambungan kabel pikeun ayana pageuh sareng korosi. Sambungan anu leupas tiasa nyababkeun kinerja anu goréng atanapi karusakan.
- beberesih: Keep the subwoofer cone and surround free from dust, dirt, and debris. Use a soft, dry cloth or a gentle brush to clean the surface. Avoid using harsh chemicals or excessive moisture.
- Perlindungan Lingkungan: Protect the subwoofer from direct exposure to sunlight, extreme heat, and moisture. These elements can degrade materials over time.
- Ulah Lumpat Kaleuleuwihi: While designed for high excursion, continuously pushing the subwoofer beyond its mechanical limits can cause damage. Listen for signs of distortion and reduce volume if heard.
Pamérésan masalah
Upami anjeun mendakan masalah sareng subwoofer anjeun, tingal masalah sareng solusi umum ieu:
| Masalah | Mungkin Cukang lantaranana | Solusi |
|---|---|---|
| Taya Sora ti Subwoofer |
|
|
| Sora Distort |
|
|
| Lemah atanapi Kurangna Bass |
|
|
| Subwoofer Overheating |
|
|
Émbaran jaminan
The DS18 ZXI6.4D 6.5-inch High Excursion Car Audio Subwoofer is covered by a limited warranty. This warranty typically covers defects in materials and workmanship under normal use. For specific details regarding the warranty period, coverage, and claims process, please refer to the official DS18 websitus atanapi ngahubungan rojongan customer maranéhanana langsung. Simpen bukti pameseran anjeun pikeun validasi jaminan.
Ngarojong
For technical assistance, product inquiries, parts, or service, please visit the official DS18 website or contact their customer support team. You can typically find contact information, FAQs, and additional resources on their websitus.
Resmi DS18 Websitus: www.ds18.com
