Bubuka
This manual provides essential information for the safe and effective operation, maintenance, and troubleshooting of your Total Tools THTLI20461 20V Lithium Battery Charger and Battery Cut Saw. Please read this manual thoroughly before first use and keep it for future reference.
Émbaran Kasalametan
Salawasna prioritas kaamanan nalika ngajalankeun parabot kakuatan. Gagalna nuturkeun parentah kaamanan bisa ngakibatkeun tatu serius atawa karuksakan harta.
- Anggo alat pelindung pribadi (PPE) anu cocog, kalebet kacamata kaamanan, sarung tangan, sareng panyalindungan dédéngéan.
- Pastikeun daérah damel bébas tina halangan sareng cahayana cekap.
- Jauhkeun barudak sareng jalma anu aya di tempat operasi.
- Ulah ngajalankeun alat dina kaayaan baseuh atawa ku ayana cairan kaduruk atawa gas.
- Always disconnect the battery pack before performing any adjustments, changing accessories, or storing the tool.
- Use only Total Tools original battery packs and chargers.
Komponén produk
Your Total Tools THTLI20461 package includes the following main components:
- 20V Battery Cut Saw Unit
- 20V Litium Batré Pack
- Gancang carjer
Gambar: Leuwihview of the Total Tools THTLI20461 20V Lithium Battery Cut Saw, including the main unit, battery pack, and charger.
Image: The Total Tools THTLI20461 product, showcasing the P20S series branding and highlighting the double blade moving feature, along with the battery, charger, and packaging.
Disetél
1. Ngecas Batré
- Connect the quick charger to a standard 220V-240V ~ 50/60Hz power outlet.
- Insert the 20V Lithium Battery Pack into the charger. Ensure it clicks securely into place.
- The charger's indicator light will show the charging status. Refer to the charger's specific instructions for light indications (e.g., red for charging, green for fully charged).
- Saatos dicas pinuh, cabut batré tina carjer.
2. Attaching the Battery to the Saw
- Align the battery pack with the battery slot on the saw unit.
- Selapkeun batréna kana slotna dugi ka konci na pageuh kana tempatna ku sora klik.
- Pikeun nyabut batréna, pencét tombol pelepas dina pak batré teras geser kaluar.
Parentah Operasi
1. Cék Pra-Operasi
- Ensure the blade is clean and free from debris.
- Verify that the battery is fully charged and securely attached.
- Check for any loose parts or damage to the tool. Do not operate if damaged.
2. Ngamimitian sareng Ngeureunkeun Saw
- To start the saw, press and hold the safety lock-off button (if present) and then squeeze the trigger switch.
- Pikeun ngeureunkeun ragaji, leupaskeun saklar pemicu.
3. Téhnik motong
The Total Tools THTLI20461 features a double blade moving mechanism for efficient cutting.
Gambar: A lengkep view of the double blade moving mechanism, illustrating how the blades operate for effective cutting.
- Cekel gergaji pageuh ku dua leungeun, bari tetep ngajaga kasaimbangan.
- Position the blade against the material to be cut, ensuring it is within the maximum cutting diameter of 18mm.
- Apply steady, even pressure as you guide the saw through the material. Avoid forcing the tool.
- Allow the saw to reach full speed (1400 RPM) before engaging the material.
- For optimal performance and safety, cut in a controlled manner, avoiding sudden movements.
Pangropéa
1. beberesih
- After each use, disconnect the battery and clean the saw unit with a dry cloth.
- Remove any sawdust, debris, or sap from the blade and ventilation openings.
- Entong nganggo bahan kimia kasar atanapi beberesih kasar.
2. Perawatan sabeulah
- Regularly inspect the blade for sharpness and damage. A dull blade can lead to poor performance and increased strain on the tool.
- If necessary, have the blade sharpened by a qualified professional or replace it with an original Total Tools replacement blade.
3. Panyimpenan batré
- Simpen pak batré di tempat anu tiis sareng garing, jauh tina sinar panonpoé langsung sareng suhu anu ekstrim.
- Pikeun panyimpenan jangka panjang, disarankeun pikeun nyimpen batréna kalayan muatan parsial (sakitar 50%).
Pamérésan masalah
| Masalah | Mungkin Cukang lantaranana | Solusi |
|---|---|---|
| Saw teu ngamimitian | Battery not charged or not properly inserted; Safety lock-off not engaged. | Charge battery; Reinsert battery securely; Ensure safety lock-off is pressed before trigger. |
| Ngurangan kinerja motong | Dull or damaged blade; Low battery charge; Material too thick. | Sharpen or replace blade; Recharge battery; Ensure material is within cutting capacity. |
| Alat eureun salila operasi | Protéksi kaleuwihan beban diaktipkeun; Batré béak. | Reduce cutting pressure; Recharge battery. |
spésifikasi
| Fitur | Spésifikasi |
|---|---|
| Modél | THTLI20461 |
| Voltage | 20V |
| Max. Laju | 1400 rpm |
| Panjang sabeulah | 45mm (18") |
| Max motong diaméterna | 18 mm |
| Carger Voltage | 220V-240V ~ 50/60Hz |
| Bahan | Plastik, Karét, Baja Tahan Karat |
| Item Beurat | 209 g (0.21 Kilogram) |
| Dimensi produk | 10 x 20 x 37 cm |
Émbaran jaminan
Total Tools products are manufactured to high-quality standards. For specific warranty terms and conditions, please refer to the warranty card included with your product packaging or contact Total Tools customer support. Keep your proof of purchase for warranty claims.
Rojongan Palanggan
If you have any questions, require technical assistance, or need to report an issue with your Total Tools THTLI20461, please contact Total Tools customer support. Refer to your product packaging or the official Total Tools websitus pikeun detil kontak.
