Bubuka
The TC Electronic Infinite Sample Sustainer is a versatile guitar effects pedal designed to sample and sustain your guitar signal, creating rich, ambient pads for you to play over. It features optional layering, an infinite mode for continuous morphing layers, and integrated reverb and modulation effects. The footswitch can be configured for either latching or momentary operation, providing flexible control over your sound.
Produk Leuwihview
Gambar 1: Kontrol Panel Hareup. Gambar ieu némbongkeun ti luhur ka handap view of the Infinite Sample Sustainer pedal, highlighting the Decay, Level, Fade In, and FX Type knobs, along with the Dry/Verb switch, Latch/Momentary switch, and the main footswitch. Input and output jacks are visible on the sides.
Gambar 2: Angled View. Perspektif sudut pedal, nunjukkeunasing its compact blue casing and the arrangement of its control knobs and jacks.
Gambar 3: Sambungan Panel Rear. This image shows the rear of the pedal, featuring the DC power input and the USB port for connectivity and firmware updates.
Figure 4: Regulatory Information. The bottom label of the pedal, displaying compliance markings, power requirements (9V === 100mA), and manufacturing details.
Disetél
Sambungan Daya
The Infinite Sample Sustainer pedal requires a 9V DC power supply with a center-negative polarity. Ensure the power supply provides at least 100mA. Connect the power supply to the DC input jack located on the rear of the pedal.
Sambungan Audio
- Connect your guitar or other instrument to the IN jack on the right side of the pedal using a standard 1/4" instrument cable.
- Nyambungkeun KALUAR dongkrak di sisi kénca pedal ka anjeun amplifier or the next pedal in your signal chain using another 1/4" instrument cable.
- For advanced routing, utilize the Ngirimkeun jeung PULIH jacks to integrate external effects into the pedal's internal FX loop. This allows you to apply other effects specifically to the sustained signal.
Sambungan USB
The USB port on the rear of the pedal is used for connecting to a computer for firmware updates and TonePrint editing. Use a standard USB cable to connect the pedal to your computer.
Ngoperasikeun Pedal
Kadali Langkungview
- kenop DECAY: Controls how quickly the sustained sound fades out. Turn clockwise for longer sustain.
- TINGKAT Knob: Adjusts the overall output volume of the sustained signal.
- FADE IN Knob: Determines the speed at which the sustained sound fades in after the footswitch is engaged.
- FX TYPE Knob: Selects between different effect types (L1, L2, L3, Infinite, TP1, TP2, TP3).
- L1, L2, L3: Layering modes, allowing you to stack multiple sustained notes or chords.
- Infinite: Creates an indefinite number of layers that gradually morph together, ideal for ambient textures.
- DRY/VERB Switch: Toggles between a dry sustained signal and a sustained signal with integrated reverb.
- LATCH/MOMEN Switch: Configures the footswitch behavior.
- LATE: Press once to engage sustain, press again to disengage.
- MOMEN (Momentary): Sustain is active only while the footswitch is held down.
- Saklar suku: Engages and disengages the sustain effect based on the LATCH/MOMEN switch setting.
Operasi Dasar
To activate the sustain effect, play a note or chord and then press the footswitch. The pedal will capture and sustain the sound according to your settings. Experiment with the Decay, Level, and Fade In knobs to shape the sustained sound. Utilize the FX Type knob to explore different layering and infinite sustain possibilities, or load custom TonePrints for unique effects.
Pangropéa
The TC Electronic Infinite Sample Sustainer pedal is built for durability. To ensure its longevity and optimal performance:
- Jaga pedal tetep bersih ku cara ngusap nganggo lawon anu lemes sareng garing. Ulah nganggo pembersih atanapi pelarut anu abrasif.
- Jaga pedal tina suhu anu ekstrim, kalembaban, sareng sinar panonpoé langsung.
- Pegatkeun sambungan kakuatan lamun teu dipaké pikeun période nambahan.
- Pariksa sadaya sambungan kabel sacara rutin pikeun mastikeun pas.
Pamérésan masalah
| Masalah | Mungkin Cukang lantaranana | Solusi |
|---|---|---|
| Teu aya sora nalika pedal dipencet. | Incorrect power supply, faulty cables, incorrect connections, Level knob set too low. | Verify power supply (9V DC, center-negative, 100mA minimum). Check all instrument cables. Ensure IN and OUT jacks are correctly connected. Increase LEVEL knob. |
| Sustain cuts out too quickly. | DECAY knob set too low, LATCH/MOMEN switch set to MOMEN. | Increase DECAY knob setting. If continuous sustain is desired, ensure LATCH/MOMEN switch is set to LATCH. |
| Sustained sound is distorted or noisy. | Input signal too hot, faulty power supply, ground loop. | Reduce input signal level from your instrument or preceding pedal. Try a different power outlet or isolated power supply. Check for ground loop issues in your setup. |
| Cannot load TonePrints. | USB connection issue, outdated TonePrint app, incorrect pedal mode. | Ensure USB cable is securely connected. Update the TC Electronic TonePrint app to the latest version. Follow app instructions for loading TonePrints. |
spésifikasi
- model: INFINITE SAMPLE SUSTAINER
- Ukuran (L x W x H): 4.8" x 2.91" x 1.97" (12.19 cm x 7.39 cm x 5.00 cm)
- beurat: 12 ons (340 gram)
- Sarat kakuatan: 9V DC, Tengah-Negatif, minimum 100mA
- Antarmuka Hardware: USB (for TonePrint and firmware updates)
- Format Sinyal: Analog
- warna: Biru
Garansi sareng Rojongan
TC Electronic products are covered by a limited warranty. For detailed warranty information, product registration, and technical support, please visit the official TC Electronic websitus atanapi ngahubungan layanan palanggan maranéhna. Simpen resi pameseran anjeun salaku bukti pameseran pikeun klaim garansi.
For the latest information and software downloads, visit: www.tcelectronic.com