1. Bubuka
This manual provides detailed instructions for the safe and effective use of the Skydroid H12 2.4Ghz FPV Remote Controller system. The H12 is a versatile digital image transmission system designed for various applications, including agricultural drones, RC robots, and industrial drones. It features a 5.5-inch high-brightness LCD screen, FHSS spread spectrum technology for extended communication range, low latency, and strong anti-interference capabilities.
2. Émbaran Kasalametan
Please read and understand all safety warnings and precautions before operating the Skydroid H12 system. Failure to follow these instructions may result in damage to the product, property, or serious injury.
- Kasalametan batré: Do not disassemble, puncture, or expose the built-in battery to extreme temperatures or direct sunlight. Use only the specified charging interface (TYPE-C) for charging.
- Lingkungan Operasi: Operate the device in a safe environment, away from obstacles, people, and animals. Avoid operating in adverse weather conditions such as strong winds or rain.
- gangguan: Be aware of potential signal interference from other 2.4Ghz devices. The H12 utilizes FHSS technology to minimize interference, but caution is still advised.
- Patuh Hukum: Ensure compliance with all local laws and regulations regarding the operation of remote-controlled devices and FPV systems.
- Pangawasan Dewasa: Produk ieu dimaksudkeun kanggo dianggo ku déwasa. Jauhkeun tina jangkauan barudak.
3. Produk Langkungview
The Skydroid H12 system comprises a ground station (transmitter), a receiver, and a camera, forming a comprehensive 3-in-1 FPV solution.
4. Spésifikasi
4.1. Ground Station (Transmitter)
| Parameter | Nilai |
|---|---|
| merek | Skydroid |
| Modél | H12 |
| Operasi Voltage | 4.2V |
| Pita frékuénsi | 2.400-2.483GHz |
| Métode ningkatkeun | APP online upgrade |
| Diménsi | 190 x 152 x 94 mm |
| Waktos Operasi | 6-20 hours (environment dependent) |
| Jumlah Saluran | 12 |
| Kakuatan RF | 20DB @ CE / 23DB @ FCC |
| Frékuénsi Hopping | New FHSS frequency hopping |
| Beurat | 530g |
| Batré | Diwangun-di 10000mAh |
| Pangecas Interface | TIPE-C |
4.2. panarima
| Parameter | Nilai |
|---|---|
| Modél | R12 |
| Jumlah Saluran | 12 |
| Operasi Ayeuna | 140mA @ 5V |
| Operasi Voltage | 4.5-5.5V |
| Diménsi | 51 x 41 x 13 mm |
| Beurat | 14g |
4.3. Kaméra
| Parameter | Nilai |
|---|---|
| Operasi Ayeuna | 140mA |
| Resolusi | 640 x 360 |
| Beurat | 55g |
| Sudut kaméra | 120° |
| Operasi Voltage | 12-72V |
| Diménsi | 102.1 x 42.6 x 36.5 mm |
| Daya Lampu LED | 6W |
5. Setélan
5.1. Ngecas Awal
Before first use, fully charge the Skydroid H12 remote controller using the provided TYPE-C charging cable. Connect the cable to the TYPE-C port on the controller and a compatible USB power source. The charging indicator will show the charging status.
5.2. Receiver Connection and Binding
Connect the R12 receiver to your drone or RC robot's flight controller. Ensure the data signal line is correctly configured for either K++ or K3APRO/Open Source FC (e.g., PIX). Refer to your flight controller's manual for specific wiring diagrams.
Pikeun ngabeungkeut pamancar sareng panarima:
- Power on the H12 transmitter.
- Power on the R12 receiver.
- Follow the binding procedure outlined in the H12's on-screen menu or accompanying quick start guide. Typically, this involves pressing a bind button on the receiver while powering it on, then initiating the binding process from the transmitter's menu.
5.3. Sambungan kaméra
Connect the camera module to the appropriate port on your drone or flight controller, ensuring it receives the correct operating voltage (12-72V). The camera transmits video data to the H12 receiver, which is then displayed on the controller's LCD screen.
5.4. APP Installation and Upgrade
Download the official Skydroid APP to your smartphone or tablet. This APP allows for online firmware upgrades for the H12 system. Connect your H12 controller to your device via USB or wirelessly as instructed by the APP. Regularly check for and install updates to ensure optimal performance and access to new features.
6. Nyuping
6.1. Daya Hurung / Pareum
Press and hold the power button on the H12 transmitter to turn it on or off. The LCD screen will illuminate upon power-on.
6.2. Kadali dasar
- Joysticks: Control the movement and direction of your drone or RC robot. The left joystick typically controls throttle and yaw, while the right joystick controls pitch and roll.
- Buttons A & B: These are programmable buttons that can be assigned to various functions within your flight controller's software, such as arming/disarming, flight mode changes, or camera controls.
- Dials/Switches: Utilize the side dials and switches for fine-tuning parameters or activating specific functions as configured in your system.
6.3. LCD Screen Interface
The 5.5-inch high-brightness LCD screen displays real-time FPV video feed from the camera, telemetry data (such as battery voltage, signal strength, altitude, speed), and navigation information. Familiarize yourself with the on-screen display (OSD) elements for safe operation.
6.4. Communication Range and Anti-Interference
The Skydroid H12 utilizes advanced FHSS (Frequency Hopping Spread Spectrum) technology, enabling a communication range of 5 to 30 kilometers. This technology enhances signal stability and provides strong anti-interference capabilities, crucial for reliable long-range operation.
6.5. Aplikasi
The Skydroid H12 system is suitable for a wide range of professional and hobbyist applications, including but not limited to:
- Agricultural spraying drones
- RC robots
- Industrial inspection drones
- Search and rescue operations
- Pamadam kebakaran
- Power line inspection
- Surveying and mapping
7. Pangropéa
7.1. beberesih
Regularly clean the exterior of the remote controller, receiver, and camera with a soft, dry cloth. Do not use liquid cleaners or solvents, as they may damage the electronic components or finish.
7.2. Panyimpenan
When not in use, store the Skydroid H12 system in a cool, dry place, away from direct sunlight and extreme temperatures. It is recommended to store the controller with the battery charged to approximately 50-60% for long-term storage to preserve battery health.
7.3. Kaperawatan batré
To maximize the lifespan of the built-in 10000mAh battery:
- Hindarkeun batréna pinuh.
- Hindarkeun ngecas batréna.
- Ngecas batré dina suhu kamar.
- If storing for extended periods, recharge the battery every 3-6 months to prevent deep discharge.
8. Cara ngungkulan
This section addresses common issues you might encounter with your Skydroid H12 system.
| Masalah | Mungkin Cukang lantaranana | Solusi |
|---|---|---|
| Kontroler teu hurung | batré lemah; Tombol daya teu tahan cukup lila | Charge the controller; Press and hold the power button for 3-5 seconds. |
| No video feed on screen | Camera not connected; Receiver not powered; Signal interference | Check camera and receiver connections; Ensure receiver is powered; Move to an area with less interference. |
| Loss of control signal | Out of range; Signal interference; Receiver not bound | Operate within specified range; Avoid strong interference sources; Re-bind transmitter and receiver. |
| APP update fails | Poor internet connection; Incorrect connection to device | Ensure stable internet connection; Verify correct USB or wireless connection to the APP. |
9. Jaminan & Dukungan
The Skydroid H12 system is designed and manufactured to high-quality standards. For warranty information and support, please refer to the specific terms provided at the time of purchase or contact your retailer.
This product is certified for technical standards with certification number: 210-175367.
For further assistance, please contact the manufacturer or your authorized dealer. Keep your purchase receipt as proof of purchase for warranty claims.
