FIMEI Floor Lamp Manual pamaké

Parentah Kasalametan penting

Mangga baca tur ngartos sagala parentah saméméh assembling tur ngagunakeun produk ieu. Simpen manual ieu pikeun rujukan ka hareup.

• Pastikeun catu daya voltage cocog jeung lampsyarat 's (240 Volts).
• Ulah ngalaan lamp ka cai atawa kalembaban anu luhur.
• Cabut colokan lamp tina stop kontak sateuacan beberesih atanapi ngalaksanakeun pangropéa naon waé.
• Entong nyobian ngarobih atanapi ngalereskeun lamp yourself. Contact qualified service personnel for assistance.
• Tetep lamp jauh tina sumber panas sareng sinar panonpoé langsung.
• Ieu lamp nyaeta pikeun pamakéan indoor wungkul.

Eusi pakét

Pariksa yén sadaya komponén aya sateuacan assembly:

This image displays all components included in the FIMEI Floor Lamp package: the main lamp body (disassembled poles and light heads), the round base, the power adapter (EU plug shown), the remote control, and the user manual.

• Lamp Body (multiple pole sections and light heads)
• Dasar buleud
• Adaptor Daya (Colokkeun EU)
• Kadali jauh
• Manual pamaké

Parentah Majelis

The FIMEI Floor Lamp is designed for easy assembly without additional tools.

1. Sacara saksama ngabongkar sadaya komponén tina bungkusan.
2. Place the round base on a flat, stable surface.
3. Hold the main light pole section and begin assembling the lamp poles from top to bottom, screwing each section clockwise until secure. Ensure the wire is not damaged by excessive pulling during this process.
4. Sambungkeun adaptor kakuatan ka lamp and then plug it into a suitable electrical outlet.

This diagram illustrates the lamp's dimensions (187 cm height, 25 cm base diameter) and the flexibility of its light heads. The main semi-rings can rotate 330 degrees vertically and horizontally, while the smaller reading lamp is freely adjustable.

Parentah Operasi

Daya Hurung/Pareuman

Anu lamp can be turned on or off using either the touch control panel on the lamp pole or the remote control.

• Kontrol Toél: Tap the power icon on the lamp tihang.
• Kadali jauh: Pencét éta Kakuatan (⏻) kancing.

Nyaluyukeun Kacaangan (Dimming)

Anu lamp supports continuous dimming from 5% to 100% brightness.

• Kontrol Toél: Use the brightness adjustment icons on the lamp tihang.
• Kadali jauh: Ngagunakeun éta Brightness Up (☀) jeung Brightness Down (☼) kancing.

This image illustrates the stepless dimming capability, showing the lamp's light output ranging from a low 5% brightness to a full 100% brightness, allowing for precise light intensity adjustment.

Nyaluyukeun Suhu Warna

Anu lamp offers four color temperature settings: 3000K, 4000K, 5000K, and 6000K.

• Kontrol Toél: Use the color temperature adjustment icons on the lamp tihang.
• Kadali jauh: Ngagunakeun éta CCT+ jeung CCT- buttons to cycle through or fine-tune color temperatures.

This visual demonstrates the four distinct color temperature settings available: 3000K for a warm, cozy ambiance; 4000K for a balanced warm white; 5000K for a bright natural white; and 6000K for a cool, slightly blue daylight white.

Using Touch Control

The touch control panel is located on the main lamp pole. It allows independent control of the main lamp and the reading light.

• Tap the respective power icon to turn on/off the main lamp or reading light.
• Use the dedicated brightness and color temperature icons for each light source.

Ngagunakeun Remote Control

The remote control allows convenient operation from up to 32 feet (10 meters) away. It features a magnetic design for easy storage on the lamp tihang.

This image highlights the dual control options: a touch-sensitive panel located on the lamp's main pole for direct adjustments, and a remote control for convenient operation from a distance. The remote control has a magnetic design for easy storage on the lamp.

Remote control ieu peryogi 2x batré AAA (teu kalebet).

Masangkeun Remote Control

If the remote control does not respond, it may need to be paired with the lamp:

1. Pastikeun lamp is plugged in but turned off.
2. Hurungkeun lamp.
3. Immediately after turning on (within 3 seconds), press and hold the Kakuatan (⏻) tombol dina kadali jauh.
4. Anu lamp will flash to indicate successful pairing.

This image shows the steps to pair the remote control with the lamp. To pair, turn off the lamp, then turn it on and immediately press and hold the 'ON' button on the remote within 3 seconds until the lamp flashes, indicating successful pairing.

Nyaluyukeun Lamp hulu

The main semi-rings and the reading light are adjustable:

• The main semi-rings can be rotated 330 degrees vertically and horizontally to direct light as desired.
• The smaller reading light is freely adjustable on its flexible arm.

Pangropéa

• beberesih: Pegatkeun sambungan listrik saméméh beberesih. Paké lemes, lawon garing pikeun ngusap lamp. Ulah make cleaners abrasive atawa pangleyur.
• Ngagantian bohlam: The LED light source is integrated and not user-replaceable. If the light source fails, contact customer support.
• Panyimpenan: Lamun nyimpen lamp, disassemble it carefully (from base to main light) and store in its original packaging in a dry place.

Pamérésan masalah

spésifikasi

Kanggo inpormasi énergi anu langkung lengkep, mangga tingali database EU EPREL: https://eprel.ec.europa.eu/qr/1500204

This is the official EU energy label for the FIMEI Floor Lamp, model MF18813. It indicates an energy efficiency class of F and an energy consumption of 27 kilowatt-hours per 1000 hours of operation. A QR code is also present for more information.

Garansi sareng Rojongan

FIMEI products are designed for quality and durability. For warranty information or technical support, please contact your retailer or visit the official FIMEI websitus.

Punten tahan bukti pameseran anjeun pikeun klaim garansi.

For further assistance, please refer to the contact information provided with your purchase or on the FIMEI brand store page.