1. Bubuka
Thank you for choosing the InFocus P120 INL412 Multimedia Projector. This manual provides essential information for the safe and efficient operation of your projector. Please read it thoroughly before using the device and retain it for future reference. The InFocus P120 INL412 is designed for versatile multimedia presentations, offering clear and vibrant images for various applications.
2. Émbaran Kasalametan
To ensure safe operation and prevent damage to the projector, please observe the following safety precautions:
- Ulah ngahalangan liang ventilasi. Pastikeun aya rohangan anu cekap di sakitar proyéktor pikeun aliran hawa anu leres pikeun nyegah panas teuing.
- Hindarkeun ningali langsung kana lensa proyektor nalika lamp hurung, sabab cahaya anu caang bisa ngabalukarkeun karusakan panon.
- Do not place the projector on an unstable cart, stand, or table. The projector may fall, causing serious injury to a child or adult, and serious damage to the unit.
- Cabut kabel daya tina stop kontak upami proyéktor moal dianggo salami lami.
- Rujukkeun sadaya jasa ka petugas jasa anu mumpuni. Ulah nyobian muka atanapi ngalereskeun proyéktor nyalira.
- Keep the projector away from water or moisture. Do not expose it to rain or immerse it in liquid.
- Use only the power cord supplied with the projector or an authorized replacement.
3. Eusi Paket
Pariksa yén sadaya barang anu didaptarkeun di handap ieu kalebet dina pakét proyéktor anjeun:
- InFocus P120 INL412 Multimedia Projector
- Kabel listrik
- Jauh Control jeung accu
- VGA Kabel
- Manual pangguna (dokumén ieu)
- Gancang Mimitian Guide
4. Produk Langkungview
Familiarize yourself with the main components of your InFocus P120 INL412 projector.
Gambar 1: Hareupeun view of the InFocus P120 INL412 Multimedia Projector, showing the lens and ventilation grilles.
4.1 Panel payun
- Lensa proyéksi: Emits gambar kana layar.
- Ring Fokus: Nyaluyukeun kajelasan gambar anu diproyeksikan.
- Zoom Ring: Saluyukeun ukuran gambar anu diproyeksikan.
- Panarima IR: Nampi sinyal tina kadali jauh.
4.2 Panel Top
- Panél kontrol: Tombol pikeun daya, navigasi menu, pilihan sumber, sareng koreksi keystone.
- Lampu Indikator: Display the projector's status (e.g., power, lamp, temperature).
4.3 Rear Panel (Connectivity)
- Masukan HDMI: Connects to HDMI-enabled devices (laptops, Blu-ray players).
- Input VGA: Nyambungkeun ka komputer nganggo kaluaran VGA.
- Port USB: For service or connecting USB devices (if supported by model).
- Audio Asup/Kaluar: For connecting external audio sources or speakers.
- Inlet kakuatan: Nyambungkeun kabel listrik.
5. Setélan
Turutan lengkah ieu pikeun setelan awal projector anjeun:
- panempatan: Place the projector on a stable, flat surface or mount it securely. Ensure the projector is positioned at an appropriate distance from the screen to achieve the desired image size.
- Sambungan Daya: Connect the power cord to the projector's power inlet and then to a grounded electrical outlet.
- Sambungkeun Alat Sumber: Connect your source device (e.g., laptop, DVD player) to the projector using an appropriate cable (HDMI, VGA, etc.). Ensure the cable is securely connected to both the source and the projector.
- Daya Hurung: Press the power button on the projector's control panel or the remote control to turn on the projector. The power indicator light will illuminate.
- Adjust Focus and Zoom: Once an image is projected, rotate the focus ring on the lens until the image is sharp and clear. Use the zoom ring to adjust the image size to fit your screen.
- Koreksi Keystone: If the image appears trapezoidal, use the keystone correction function (either via buttons on the projector/remote or through the on-screen menu) to square the image.
6. Parentah Operasi
6.1 Daya Hurung/Pareuman
- Pikeun Ngahurungkeun: Press the power button once. The projector will go through a warm-up sequence.
- Pikeun mareuman: Press the power button twice. The first press will prompt a shutdown confirmation; the second press will initiate shutdown. Allow the projector to cool down completely before unplugging.
6.2 Pamilihan Sumber
Press the 'Source' button on the projector or remote control to cycle through available input sources (HDMI, VGA, etc.) until your desired source is displayed.
6.3 Navigasi Menu
Press the 'Menu' button to access the on-screen display (OSD) menu. Use the arrow buttons to navigate through options and 'Enter' or 'OK' to select. Use the 'Exit' or 'Menu' button to close the OSD.
- Setélan Gambar: Saluyukeun kacaangan, kontras, warna, rasio aspek, sareng modeu gambar.
- Setélan tampilan: Configure keystone, projection mode (front/rear, desktop/ceiling), and resolution.
- Setélan Audio: Control volume and audio output options.
- Setélan Sistim: Manage language, timer, power-saving modes, and factory reset.
7. Pangropéa
Pangropéa rutin mastikeun kinerja anu optimal sareng manjangkeun umur proyéktor anjeun.
- Ngabersihan lensa: Lembut usap lénsa proyektor ku kaén anu lembut, bébas serat anu dirarancang khusus pikeun permukaan optik. Ulah make cleaners abrasive atawa gaya kaleuleuwihan.
- beberesih Kabinet: Use a soft, dry cloth to clean the projector's exterior. For stubborn marks, dampen the cloth slightly with water. Avoid using harsh chemicals.
- Ngabersihkeun/Ngaganti Saringan Udara: Check the air filter periodically. If your model has a removable filter, clean it with a soft brush or vacuum cleaner. Replace the filter as recommended in the on-screen menu or when visibly dirty to maintain proper ventilation.
- Lamp ngagantian: Proyéktor lamp boga umur nu tangtu. Nalika lamp life indicator appears, or the image brightness significantly decreases, replace the lamp according to the instructions provided in the full service manual or by a qualified technician. Always allow the projector to cool down completely before attempting lamp ngagantian.
8. Cara ngungkulan
Tingali tabel di handap pikeun masalah umum sareng solusina:
| Masalah | Mungkin Cukang lantaranana | Solusi |
|---|---|---|
| Taya gambar ditémbongkeun | Power cord disconnected, incorrect input source, source device off. | Check power connections. Select correct input source. Ensure source device is powered on. |
| Gambar kabur | Lens out of focus, incorrect projection distance. | Adjust the focus ring on the lens. Reposition the projector closer or further from the screen. |
| Gambar téh trapezoidal | Proyéktor teu tegak lurus kana layar. | Use keystone correction (manual or automatic) to square the image. |
| Projector overheats tur pareum | Ventilasi mampet, saringan hawa kotor. | Ensure clear space around vents. Clean or replace the air filter. |
| Kadali jauh teu jalan | Dead batteries, obstruction between remote and projector, incorrect angle. | Replace batteries. Ensure clear line of sight to IR receiver. Point remote directly at the projector. |
9. Spésifikasi
Key technical specifications for the InFocus P120 INL412 Multimedia Projector:
| Fitur | Spésifikasi |
|---|---|
| Nomer modél | P120 INL412 (Item model number: 7296144) |
| Tipe tampilan | DLP |
| Resolusi pribumi | 1280 x 800 |
| Resolusi tampilan maksimum | 1280 x 800 |
| Téhnologi konektipitas | USB (and other standard inputs like HDMI, VGA) |
| Dimensi produk | 5.25 x 0.31 x 1.66 inci |
| Item Beurat | 6.6 pon |
| Produsén | Dina Fokus |
10. Garansi jeung Rojongan
The InFocus P120 INL412 Multimedia Projector comes with a standard manufacturer's warranty. Please refer to the warranty card included in your package for specific terms and conditions, including warranty duration and coverage details. For technical support, service, or further inquiries, please visit the official InFocus support websitus atanapi ngahubungan departemén layanan palanggan maranéhna.
Kanggo inpormasi pangrojong anu paling énggal, mangga buka: www.infocus.com/support
